Message ID | 20221130131001.20912-8-dmitry.baryshkov@linaro.org |
---|---|
State | New |
Headers | show |
Series | clk: qcom: rpm/rpmh: drop platform names | expand |
On 30.11.2022 14:10, Dmitry Baryshkov wrote: > Simplify __DEFINE_CLK_RPMH macros to use clk_rpmh directly instead of > passing it through the `_platform' argument. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > drivers/clk/qcom/clk-rpmh.c | 16 ++++++++-------- > 1 file changed, 8 insertions(+), 8 deletions(-) > > diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c > index dcac84614b06..2bcf725dd919 100644 > --- a/drivers/clk/qcom/clk-rpmh.c > +++ b/drivers/clk/qcom/clk-rpmh.c > @@ -70,15 +70,15 @@ struct clk_rpmh_desc { > > static DEFINE_MUTEX(rpmh_clk_lock); > > -#define __DEFINE_CLK_RPMH(_platform, _name, _cname, _res_name, \ > +#define __DEFINE_CLK_RPMH(_name, _cname, _res_name, \ > _res_en_offset, _res_on, _div) \ > - static struct clk_rpmh _platform##_##_cname##_ao; \ > - static struct clk_rpmh _platform##_##_cname = { \ > + static struct clk_rpmh clk_rpmh_##_cname##_ao; \ > + static struct clk_rpmh clk_rpmh_##_cname = { \ > .res_name = _res_name, \ > .res_addr = _res_en_offset, \ > .res_on_val = _res_on, \ > .div = _div, \ > - .peer = &_platform##_##_cname##_ao, \ > + .peer = &clk_rpmh_##_cname##_ao, \ > .valid_state_mask = (BIT(RPMH_WAKE_ONLY_STATE) | \ > BIT(RPMH_ACTIVE_ONLY_STATE) | \ > BIT(RPMH_SLEEP_STATE)), \ > @@ -92,12 +92,12 @@ static DEFINE_MUTEX(rpmh_clk_lock); > .num_parents = 1, \ > }, \ > }; \ > - static struct clk_rpmh _platform##_##_cname##_ao= { \ > + static struct clk_rpmh clk_rpmh_##_cname##_ao= { \ > .res_name = _res_name, \ > .res_addr = _res_en_offset, \ > .res_on_val = _res_on, \ > .div = _div, \ > - .peer = &_platform##_##_cname, \ > + .peer = &clk_rpmh_##_cname, \ > .valid_state_mask = (BIT(RPMH_WAKE_ONLY_STATE) | \ > BIT(RPMH_ACTIVE_ONLY_STATE)), \ > .hw.init = &(struct clk_init_data){ \ > @@ -112,11 +112,11 @@ static DEFINE_MUTEX(rpmh_clk_lock); > } > > #define DEFINE_CLK_RPMH_ARC(_name, _res_name, _res_on, _div) \ > - __DEFINE_CLK_RPMH(clk_rpmh, _name, _name##_##div##_div, _res_name, \ > + __DEFINE_CLK_RPMH(_name, _name##_##div##_div, _res_name, \ > CLK_RPMH_ARC_EN_OFFSET, _res_on, _div) > > #define DEFINE_CLK_RPMH_VRM(_name, _suffix, _res_name, _div) \ > - __DEFINE_CLK_RPMH(clk_rpmh, _name, _name##_suffix, _res_name, \ > + __DEFINE_CLK_RPMH(_name, _name##_suffix, _res_name, \ > CLK_RPMH_VRM_EN_OFFSET, 1, _div) > > #define DEFINE_CLK_RPMH_BCM(_name, _res_name) \
On 11/30/22 7:10 AM, Dmitry Baryshkov wrote: > Simplify __DEFINE_CLK_RPMH macros to use clk_rpmh directly instead of > passing it through the `_platform' argument. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> It's nice that you separated this step. If you eliminated the platform part in the name in one patch, maybe this could be done at the same time--and still be an easy-to understand patch? Please consider it but either way I think it's OK. -Alex > --- > drivers/clk/qcom/clk-rpmh.c | 16 ++++++++-------- > 1 file changed, 8 insertions(+), 8 deletions(-) > > diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c > index dcac84614b06..2bcf725dd919 100644 > --- a/drivers/clk/qcom/clk-rpmh.c > +++ b/drivers/clk/qcom/clk-rpmh.c > @@ -70,15 +70,15 @@ struct clk_rpmh_desc { > > static DEFINE_MUTEX(rpmh_clk_lock); > > -#define __DEFINE_CLK_RPMH(_platform, _name, _cname, _res_name, \ > +#define __DEFINE_CLK_RPMH(_name, _cname, _res_name, \ > _res_en_offset, _res_on, _div) \ > - static struct clk_rpmh _platform##_##_cname##_ao; \ > - static struct clk_rpmh _platform##_##_cname = { \ > + static struct clk_rpmh clk_rpmh_##_cname##_ao; \ > + static struct clk_rpmh clk_rpmh_##_cname = { \ > .res_name = _res_name, \ > .res_addr = _res_en_offset, \ > .res_on_val = _res_on, \ > .div = _div, \ > - .peer = &_platform##_##_cname##_ao, \ > + .peer = &clk_rpmh_##_cname##_ao, \ > .valid_state_mask = (BIT(RPMH_WAKE_ONLY_STATE) | \ > BIT(RPMH_ACTIVE_ONLY_STATE) | \ > BIT(RPMH_SLEEP_STATE)), \ > @@ -92,12 +92,12 @@ static DEFINE_MUTEX(rpmh_clk_lock); > .num_parents = 1, \ > }, \ > }; \ > - static struct clk_rpmh _platform##_##_cname##_ao= { \ > + static struct clk_rpmh clk_rpmh_##_cname##_ao= { \ > .res_name = _res_name, \ > .res_addr = _res_en_offset, \ > .res_on_val = _res_on, \ > .div = _div, \ > - .peer = &_platform##_##_cname, \ > + .peer = &clk_rpmh_##_cname, \ > .valid_state_mask = (BIT(RPMH_WAKE_ONLY_STATE) | \ > BIT(RPMH_ACTIVE_ONLY_STATE)), \ > .hw.init = &(struct clk_init_data){ \ > @@ -112,11 +112,11 @@ static DEFINE_MUTEX(rpmh_clk_lock); > } > > #define DEFINE_CLK_RPMH_ARC(_name, _res_name, _res_on, _div) \ > - __DEFINE_CLK_RPMH(clk_rpmh, _name, _name##_##div##_div, _res_name, \ > + __DEFINE_CLK_RPMH(_name, _name##_##div##_div, _res_name, \ > CLK_RPMH_ARC_EN_OFFSET, _res_on, _div) > > #define DEFINE_CLK_RPMH_VRM(_name, _suffix, _res_name, _div) \ > - __DEFINE_CLK_RPMH(clk_rpmh, _name, _name##_suffix, _res_name, \ > + __DEFINE_CLK_RPMH(_name, _name##_suffix, _res_name, \ > CLK_RPMH_VRM_EN_OFFSET, 1, _div) > > #define DEFINE_CLK_RPMH_BCM(_name, _res_name) \
diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c index dcac84614b06..2bcf725dd919 100644 --- a/drivers/clk/qcom/clk-rpmh.c +++ b/drivers/clk/qcom/clk-rpmh.c @@ -70,15 +70,15 @@ struct clk_rpmh_desc { static DEFINE_MUTEX(rpmh_clk_lock); -#define __DEFINE_CLK_RPMH(_platform, _name, _cname, _res_name, \ +#define __DEFINE_CLK_RPMH(_name, _cname, _res_name, \ _res_en_offset, _res_on, _div) \ - static struct clk_rpmh _platform##_##_cname##_ao; \ - static struct clk_rpmh _platform##_##_cname = { \ + static struct clk_rpmh clk_rpmh_##_cname##_ao; \ + static struct clk_rpmh clk_rpmh_##_cname = { \ .res_name = _res_name, \ .res_addr = _res_en_offset, \ .res_on_val = _res_on, \ .div = _div, \ - .peer = &_platform##_##_cname##_ao, \ + .peer = &clk_rpmh_##_cname##_ao, \ .valid_state_mask = (BIT(RPMH_WAKE_ONLY_STATE) | \ BIT(RPMH_ACTIVE_ONLY_STATE) | \ BIT(RPMH_SLEEP_STATE)), \ @@ -92,12 +92,12 @@ static DEFINE_MUTEX(rpmh_clk_lock); .num_parents = 1, \ }, \ }; \ - static struct clk_rpmh _platform##_##_cname##_ao= { \ + static struct clk_rpmh clk_rpmh_##_cname##_ao= { \ .res_name = _res_name, \ .res_addr = _res_en_offset, \ .res_on_val = _res_on, \ .div = _div, \ - .peer = &_platform##_##_cname, \ + .peer = &clk_rpmh_##_cname, \ .valid_state_mask = (BIT(RPMH_WAKE_ONLY_STATE) | \ BIT(RPMH_ACTIVE_ONLY_STATE)), \ .hw.init = &(struct clk_init_data){ \ @@ -112,11 +112,11 @@ static DEFINE_MUTEX(rpmh_clk_lock); } #define DEFINE_CLK_RPMH_ARC(_name, _res_name, _res_on, _div) \ - __DEFINE_CLK_RPMH(clk_rpmh, _name, _name##_##div##_div, _res_name, \ + __DEFINE_CLK_RPMH(_name, _name##_##div##_div, _res_name, \ CLK_RPMH_ARC_EN_OFFSET, _res_on, _div) #define DEFINE_CLK_RPMH_VRM(_name, _suffix, _res_name, _div) \ - __DEFINE_CLK_RPMH(clk_rpmh, _name, _name##_suffix, _res_name, \ + __DEFINE_CLK_RPMH(_name, _name##_suffix, _res_name, \ CLK_RPMH_VRM_EN_OFFSET, 1, _div) #define DEFINE_CLK_RPMH_BCM(_name, _res_name) \
Simplify __DEFINE_CLK_RPMH macros to use clk_rpmh directly instead of passing it through the `_platform' argument. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/clk/qcom/clk-rpmh.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)