diff mbox series

[2/2] ARM: dts: qcom: align LED node names with dtschema

Message ID 20221125144209.477328-2-krzysztof.kozlowski@linaro.org
State Accepted
Commit 3ebeed30209aa50505956076aff1cf00a6381760
Headers show
Series [1/2] arm64: dts: qcom: align LED node names with dtschema | expand

Commit Message

Krzysztof Kozlowski Nov. 25, 2022, 2:42 p.m. UTC 
The node names should be generic and DT schema expects certain pattern:

  qcom-ipq4018-ap120c-ac.dtb: leds: 'wlan2g', 'wlan5g' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts | 6 +++---
 arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts     | 6 +++---
 2 files changed, 6 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
index cf7da1ab177c..1b27edce9d4f 100644
--- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
+++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac-bit.dts
@@ -9,7 +9,7 @@  / {
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "ap120c-ac:green:power";
 			function = LED_FUNCTION_POWER;
 			color = <LED_COLOR_ID_GREEN>;
@@ -17,14 +17,14 @@  power {
 			default-state = "on";
 		};
 
-		wlan {
+		led-wlan {
 			label = "ap120c-ac:green:wlan";
 			function = LED_FUNCTION_WLAN;
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
 		};
 
-		support {
+		led-support {
 			label = "ap120c-ac:green:support";
 			color = <LED_COLOR_ID_GREEN>;
 			gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
index c4f89b712fd9..a707057c887d 100644
--- a/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
+++ b/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
@@ -7,7 +7,7 @@  / {
 	leds {
 		compatible = "gpio-leds";
 
-		status: status {
+		status: led-status {
 			label = "ap120c-ac:blue:status";
 			function = LED_FUNCTION_STATUS;
 			color = <LED_COLOR_ID_BLUE>;
@@ -15,7 +15,7 @@  status: status {
 			default-state = "keep";
 		};
 
-		wlan2g {
+		led-wlan2g {
 			label = "ap120c-ac:green:wlan2g";
 			function = LED_FUNCTION_WLAN;
 			color = <LED_COLOR_ID_GREEN>;
@@ -23,7 +23,7 @@  wlan2g {
 			linux,default-trigger = "phy0tpt";
 		};
 
-		wlan5g {
+		led-wlan5g {
 			label = "ap120c-ac:red:wlan5g";
 			function = LED_FUNCTION_WLAN;
 			color = <LED_COLOR_ID_RED>;