From patchwork Wed Nov 23 14:20:09 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Abel Vesa X-Patchwork-Id: 628400 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 919B5C47088 for ; Wed, 23 Nov 2022 14:21:19 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S238067AbiKWOVR (ORCPT ); Wed, 23 Nov 2022 09:21:17 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:44114 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S238136AbiKWOUv (ORCPT ); Wed, 23 Nov 2022 09:20:51 -0500 Received: from mail-wm1-x32a.google.com (mail-wm1-x32a.google.com [IPv6:2a00:1450:4864:20::32a]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8B0DD64A39 for ; Wed, 23 Nov 2022 06:20:33 -0800 (PST) Received: by mail-wm1-x32a.google.com with SMTP id 83-20020a1c0256000000b003d03017c6efso872321wmc.4 for ; Wed, 23 Nov 2022 06:20:33 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=VOaNeCVYgeJi2HwFuDgl4TQN4ICK/kM5nYTRgUTADU0=; b=C8OMMwrvoAGo3W/zmIOvCJnqH6JnAJfWUyNovC6ubnleUQ0RCEyhiGu27aPphNZ/6Q I/wBBRGHSBnjjCS94pK6kpDEy2O/mkzniV9awXU5BsMCyFjk+Tnst3BXV9SApuczxJIU LzkPc+qZo0F+E4MVk7QDJA7tGDdiQ8lndY1AJYxSLSYi7Sn/IHen2CGuj62yKRJ+qtGP Rv2giW+ujwcbOOWuFhp2/rxgbokLzMEYjwy0XkxGTKKi2D0O27o0AIK4tQwKReKONHV5 bnnMCCxci19P810zoyXmcOF1z726mx7oz7zjKb+qzDBeIm89cjDWeMbjdWy1v3qHsKOn bGUQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=VOaNeCVYgeJi2HwFuDgl4TQN4ICK/kM5nYTRgUTADU0=; b=UhStnXLdB8iR/SVI265ThsTPFHWmq2rzFTJeeutnlplaTTD6AkZYv5BxFcD3cX7NWl hWXKN3QLxTA1nHcQ/I9FiTZjLkiQWFvUBSgqIdbdM8XDB0VsEKQvViz9Zinp2rK1EGNp qoHntNUwHjFzcljq8PF2KsQ5YCyUD/vGUSEErdMUQyf7FzWdKNzz8TjklUK4vubfdNgD n2J0g/DX86mV9cKqerD4WcfureN95LdU1eaBM9RFbdPOmR2yNeCeIYOuI+EyGs2HxHhf vusBDDo7LUwmxTNfUMFQu3bU6kvkiOh5Zba92i3M3U6ay4l9/wFNiofM26MiGhftGvB5 gs6Q== X-Gm-Message-State: ANoB5pnoSGrlCG9RDoChnKDzQkIeJdMTPKtlvQckbMmm5ASEPRJf484k bEeyE2rpuLbuGGVexRTptMB/yQ== X-Google-Smtp-Source: AA0mqf7gZ5mhq2FXB7fYpqpI+YFaoZWGC+6meZm9Km/66lixoP90Gatq+B5mXLJGKgyr7hS/hvDG5Q== X-Received: by 2002:a05:600c:41c7:b0:3cf:a0f4:7879 with SMTP id t7-20020a05600c41c700b003cfa0f47879mr6506382wmh.152.1669213231976; Wed, 23 Nov 2022 06:20:31 -0800 (PST) Received: from localhost.localdomain ([94.52.112.99]) by smtp.gmail.com with ESMTPSA id g9-20020a05600c4ec900b003cfd58409desm2837438wmq.13.2022.11.23.06.20.30 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 23 Nov 2022 06:20:31 -0800 (PST) From: Abel Vesa To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Mike Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski Cc: Linux Kernel Mailing List , devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org Subject: [PATCH v2 9/9] clk: qcom: Add TCSR clock driver for SM8550 Date: Wed, 23 Nov 2022 16:20:09 +0200 Message-Id: <20221123142009.594781-10-abel.vesa@linaro.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20221123142009.594781-1-abel.vesa@linaro.org> References: <20221123142009.594781-1-abel.vesa@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org The TCSR clock controller found on SM8550 provides refclks for PCIE, USB and UFS. Add clock driver for it. This patch is based on initial code downstream. Signed-off-by: Abel Vesa Reviewed-by: Konrad Dybcio --- Changes since v1: * added Konrad's R-b tag drivers/clk/qcom/Kconfig | 7 ++ drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/tcsrcc-sm8550.c | 193 +++++++++++++++++++++++++++++++ 3 files changed, 201 insertions(+) create mode 100644 drivers/clk/qcom/tcsrcc-sm8550.c diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig index e2cfa9c74bcf..67ce8c4d3ff9 100644 --- a/drivers/clk/qcom/Kconfig +++ b/drivers/clk/qcom/Kconfig @@ -779,6 +779,13 @@ config SM_GPUCC_8350 Say Y if you want to support graphics controller devices and functionality such as 3D graphics. +config SM_TCSRCC_8550 + tristate "SM8550 TCSR Clock Controller" + select QCOM_GDSC + help + Support for the TCSR clock controller on SM8550 devices. + Say Y if you want to use peripheral devices such as SD/UFS. + config SM_VIDEOCC_8150 tristate "SM8150 Video Clock Controller" select SM_GCC_8150 diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile index 06ae671bdea6..29469f1290e6 100644 --- a/drivers/clk/qcom/Makefile +++ b/drivers/clk/qcom/Makefile @@ -110,6 +110,7 @@ obj-$(CONFIG_SM_GPUCC_6350) += gpucc-sm6350.o obj-$(CONFIG_SM_GPUCC_8150) += gpucc-sm8150.o obj-$(CONFIG_SM_GPUCC_8250) += gpucc-sm8250.o obj-$(CONFIG_SM_GPUCC_8350) += gpucc-sm8350.o +obj-$(CONFIG_SM_TCSRCC_8550) += tcsrcc-sm8550.o obj-$(CONFIG_SM_VIDEOCC_8150) += videocc-sm8150.o obj-$(CONFIG_SM_VIDEOCC_8250) += videocc-sm8250.o obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o diff --git a/drivers/clk/qcom/tcsrcc-sm8550.c b/drivers/clk/qcom/tcsrcc-sm8550.c new file mode 100644 index 000000000000..a1395d01a536 --- /dev/null +++ b/drivers/clk/qcom/tcsrcc-sm8550.c @@ -0,0 +1,193 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +#include +#include +#include +#include + +#include + +#include "clk-alpha-pll.h" +#include "clk-branch.h" +#include "clk-pll.h" +#include "clk-rcg.h" +#include "clk-regmap.h" +#include "clk-regmap-divider.h" +#include "clk-regmap-mux.h" +#include "common.h" +#include "reset.h" + +enum { + DT_BI_TCXO, + DT_BI_TCXO_PAD, +}; + +static struct clk_branch tcsr_pcie_0_clkref_en = { + .halt_reg = 0x15100, + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x15100, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "tcsr_pcie_0_clkref_en", + .parent_data = &(const struct clk_parent_data){ + .index = DT_BI_TCXO, + }, + .num_parents = 1, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch tcsr_pcie_1_clkref_en = { + .halt_reg = 0x15114, + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x15114, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "tcsr_pcie_1_clkref_en", + .parent_data = &(const struct clk_parent_data){ + .index = DT_BI_TCXO, + }, + .num_parents = 1, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch tcsr_ufs_clkref_en = { + .halt_reg = 0x15110, + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x15110, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "tcsr_ufs_clkref_en", + .parent_data = &(const struct clk_parent_data){ + .index = DT_BI_TCXO, + }, + .num_parents = 1, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch tcsr_ufs_pad_clkref_en = { + .halt_reg = 0x15104, + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x15104, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "tcsr_ufs_pad_clkref_en", + .parent_data = &(const struct clk_parent_data){ + .index = DT_BI_TCXO, + }, + .num_parents = 1, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch tcsr_usb2_clkref_en = { + .halt_reg = 0x15118, + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x15118, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "tcsr_usb2_clkref_en", + .parent_data = &(const struct clk_parent_data){ + .index = DT_BI_TCXO_PAD, + }, + .num_parents = 1, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_branch tcsr_usb3_clkref_en = { + .halt_reg = 0x15108, + .halt_check = BRANCH_HALT_SKIP, + .clkr = { + .enable_reg = 0x15108, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "tcsr_usb3_clkref_en", + .parent_data = &(const struct clk_parent_data){ + .index = DT_BI_TCXO, + }, + .num_parents = 1, + .ops = &clk_branch2_ops, + }, + }, +}; + +static struct clk_regmap *tcsr_cc_sm8550_clocks[] = { + [TCSR_PCIE_0_CLKREF_EN] = &tcsr_pcie_0_clkref_en.clkr, + [TCSR_PCIE_1_CLKREF_EN] = &tcsr_pcie_1_clkref_en.clkr, + [TCSR_UFS_CLKREF_EN] = &tcsr_ufs_clkref_en.clkr, + [TCSR_UFS_PAD_CLKREF_EN] = &tcsr_ufs_pad_clkref_en.clkr, + [TCSR_USB2_CLKREF_EN] = &tcsr_usb2_clkref_en.clkr, + [TCSR_USB3_CLKREF_EN] = &tcsr_usb3_clkref_en.clkr, +}; + +static const struct regmap_config tcsr_cc_sm8550_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = 0x2f000, + .fast_io = true, +}; + +static const struct qcom_cc_desc tcsr_cc_sm8550_desc = { + .config = &tcsr_cc_sm8550_regmap_config, + .clks = tcsr_cc_sm8550_clocks, + .num_clks = ARRAY_SIZE(tcsr_cc_sm8550_clocks), +}; + +static const struct of_device_id tcsr_cc_sm8550_match_table[] = { + { .compatible = "qcom,sm8550-tcsrcc" }, + { } +}; +MODULE_DEVICE_TABLE(of, tcsr_cc_sm8550_match_table); + +static int tcsr_cc_sm8550_probe(struct platform_device *pdev) +{ + struct regmap *regmap; + + regmap = qcom_cc_map(pdev, &tcsr_cc_sm8550_desc); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + return qcom_cc_really_probe(pdev, &tcsr_cc_sm8550_desc, regmap); +} + +static struct platform_driver tcsr_cc_sm8550_driver = { + .probe = tcsr_cc_sm8550_probe, + .driver = { + .name = "tcsr_cc-sm8550", + .of_match_table = tcsr_cc_sm8550_match_table, + }, +}; + +static int __init tcsr_cc_sm8550_init(void) +{ + return platform_driver_register(&tcsr_cc_sm8550_driver); +} +subsys_initcall(tcsr_cc_sm8550_init); + +static void __exit tcsr_cc_sm8550_exit(void) +{ + platform_driver_unregister(&tcsr_cc_sm8550_driver); +} +module_exit(tcsr_cc_sm8550_exit); + +MODULE_DESCRIPTION("QTI TCSRCC SM8550 Driver"); +MODULE_LICENSE("GPL");