From patchwork Wed Nov 16 16:27:59 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bryan O'Donoghue X-Patchwork-Id: 625145 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 7E6A3C07E9D for ; Wed, 16 Nov 2022 16:36:13 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234131AbiKPQgM (ORCPT ); Wed, 16 Nov 2022 11:36:12 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48036 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233604AbiKPQfq (ORCPT ); Wed, 16 Nov 2022 11:35:46 -0500 Received: from mail-wr1-x42c.google.com (mail-wr1-x42c.google.com [IPv6:2a00:1450:4864:20::42c]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B95F25B5BB for ; Wed, 16 Nov 2022 08:28:12 -0800 (PST) Received: by mail-wr1-x42c.google.com with SMTP id h9so30804658wrt.0 for ; Wed, 16 Nov 2022 08:28:12 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=yWW8UuJ/BxO4nM6TqB3D45Z5tX0e7fD6LJhIzNErQBY=; b=vUIg21SbI5gEsFyKjUoQ70p3/hG7WZgAUgZXVuGDUErgNPrDEHQljxv9JlsvtrYdNh uwUngRX/5KyYEMJJ3UUCnBBXmtBvaEFGeCVlwCfwBVSwaI/JUTPs6q/5xRIp4By6eR3t AYqIVDy7yvzep074HC1lBUItW5TCAR6J0fesZxvhlM4juio+wTuV6ecJnSjaVjhwh1lE T7HOD+bCAqMs3/N0Vj/9/iSRzlL4f5mlPqaSBU0jRgHjLKEJokzWXWg6oBt059bj2r37 8vep+2GwwXcHEt9jnudHJ/u2pjs1wxW4Z0w2ykyq/k+PFDgOjshKe+Ej+I5mH+dM+T3y f3Mg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=yWW8UuJ/BxO4nM6TqB3D45Z5tX0e7fD6LJhIzNErQBY=; b=EGL2tjrKEmC1ebHMCX94Rykv0rrZYVFW3TRYIisTHuLb2frzjggg4dz3JSwG2T9Mt8 LeZOl5nKVyfLiKOcGBqisj2WfbUltHgCVElKFEmXt56vD2VQh24VeX5Ikk7tQMUoBVsq WUleLXGCDNFj/6/jq5FyhAxrqGlW0OKteTrzVpd3EnO+qkZlW9yFNNT9cUrHyM/b3RDA 2H05yUyOOk7WDrROYQUxxU5xoYKJy16IwAKwyANw6hdoQOF7nlrSKjsZAsgc/729XLOR H6PpSoNq8g1+QWpc42Lop4zjU46TXABOa1Zg+fjQHPOaJb/A8zzQloGT2qW0jrXyElIZ YxuA== X-Gm-Message-State: ANoB5pm+x8kjYuxEhZJuoYlEwUp+rH0sXybqT/Evb6ayz8dlOA6CIspD eUh4gcHfzhlz4Ow+ihctorWlsg== X-Google-Smtp-Source: AA0mqf6/naCGwIE/WeeM0zdUGT267gBJhJCx1AQzGwkyA5dZ3qKhZ7JqHf3TdFV3AkPHYCGC/C270A== X-Received: by 2002:adf:f650:0:b0:236:e271:ead4 with SMTP id x16-20020adff650000000b00236e271ead4mr13954591wrp.426.1668616092320; Wed, 16 Nov 2022 08:28:12 -0800 (PST) Received: from localhost.localdomain (188-141-3-169.dynamic.upc.ie. [188.141.3.169]) by smtp.gmail.com with ESMTPSA id s3-20020adfecc3000000b0022e653f5abbsm15459168wro.69.2022.11.16.08.28.11 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 16 Nov 2022 08:28:11 -0800 (PST) From: Bryan O'Donoghue To: robert.foss@linaro.org, todor.too@gmail.com, agross@kernel.org, andersson@kernel.org, konrad.dybcio@somainline.org, mchehab@kernel.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, dmitry.baryshkov@linaro.org, vladimir.zapolskiy@linaro.org Cc: sakari.ailus@iki.fi, hverkuil@xs4all.nl, laurent.pinchart@ideasonboard.com, quic_mmitkov@quicinc.com, linux-media@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, Bryan O'Donoghue Subject: [PATCH v6 5/7] arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Add navigation mezzanine dts Date: Wed, 16 Nov 2022 16:27:59 +0000 Message-Id: <20221116162801.546737-6-bryan.odonoghue@linaro.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20221116162801.546737-1-bryan.odonoghue@linaro.org> References: <20221116162801.546737-1-bryan.odonoghue@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Move the dts data for the rb3 navigation mezzanine into its own dts file. Suggested-by: Dmitry Baryshkov Signed-off-by: Bryan O'Donoghue --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../sdm845-db845c-navigation-mezzanine.dts | 104 ++++++++++++++++++ arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 96 ---------------- 3 files changed, 105 insertions(+), 96 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index afe496a93f945..4c81c1ee7f7c7 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -132,6 +132,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c-navigation-mezzanine.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-lg-judyln.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-lg-judyp.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts new file mode 100644 index 0000000000000..a21caa6f3fa25 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dts @@ -0,0 +1,104 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022, Linaro Ltd. + */ + +/dts-v1/; + +#include "sdm845-db845c.dts" + +&camss { + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; + + status = "okay"; + + ports { + port@0 { + csiphy0_ep: endpoint { + data-lanes = <0 1 2 3>; + remote-endpoint = <&ov8856_ep>; + }; + }; + }; +}; + +&cci { + status = "okay"; +}; + +&cci_i2c0 { + camera@10 { + compatible = "ovti,ov8856"; + reg = <0x10>; + + /* CAM0_RST_N */ + reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&cam0_default>; + + clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; + clock-names = "xvclk"; + clock-frequency = <19200000>; + + /* + * The &vreg_s4a_1p8 trace is powered on as a, + * so it is represented by a fixed regulator. + * + * The 2.8V vdda-supply and 1.2V vddd-supply regulators + * both have to be enabled through the power management + * gpios. + */ + dovdd-supply = <&vreg_lvs1a_1p8>; + avdd-supply = <&cam0_avdd_2v8>; + dvdd-supply = <&cam0_dvdd_1v2>; + + port { + ov8856_ep: endpoint { + link-frequencies = /bits/ 64 + <360000000 180000000>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csiphy0_ep>; + }; + }; + }; +}; + +&cci_i2c1 { + camera@60 { + compatible = "ovti,ov7251"; + + /* I2C address as per ov7251.txt linux documentation */ + reg = <0x60>; + + /* CAM3_RST_N */ + enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam3_default>; + + clocks = <&clock_camcc CAM_CC_MCLK3_CLK>; + clock-names = "xclk"; + clock-frequency = <24000000>; + + /* + * The &vreg_s4a_1p8 trace always powered on. + * + * The 2.8V vdda-supply regulator is enabled when the + * vreg_s4a_1p8 trace is pulled high. + * It too is represented by a fixed regulator. + * + * No 1.2V vddd-supply regulator is used. + */ + vdddo-supply = <&vreg_lvs1a_1p8>; + vdda-supply = <&cam3_avdd_2v8>; + + status = "disabled"; + + port { + ov7251_ep: endpoint { + data-lanes = <0 1>; +/* remote-endpoint = <&csiphy3_ep>; */ + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index be946f71666bc..f41c6d600ea8c 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -1174,102 +1174,6 @@ &pm8998_gpio { }; -&cci { - status = "okay"; -}; - -&camss { - vdda-phy-supply = <&vreg_l1a_0p875>; - vdda-pll-supply = <&vreg_l26a_1p2>; - - status = "okay"; - - ports { - port@0 { - csiphy0_ep: endpoint { - data-lanes = <0 1 2 3>; - remote-endpoint = <&ov8856_ep>; - }; - }; - }; -}; - -&cci_i2c0 { - camera@10 { - compatible = "ovti,ov8856"; - reg = <0x10>; - - /* CAM0_RST_N */ - reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&cam0_default>; - - clocks = <&clock_camcc CAM_CC_MCLK0_CLK>; - clock-names = "xvclk"; - clock-frequency = <19200000>; - - /* - * The &vreg_s4a_1p8 trace is powered on as a, - * so it is represented by a fixed regulator. - * - * The 2.8V vdda-supply and 1.2V vddd-supply regulators - * both have to be enabled through the power management - * gpios. - */ - dovdd-supply = <&vreg_lvs1a_1p8>; - avdd-supply = <&cam0_avdd_2v8>; - dvdd-supply = <&cam0_dvdd_1v2>; - - port { - ov8856_ep: endpoint { - link-frequencies = /bits/ 64 - <360000000 180000000>; - data-lanes = <1 2 3 4>; - remote-endpoint = <&csiphy0_ep>; - }; - }; - }; -}; - -&cci_i2c1 { - camera@60 { - compatible = "ovti,ov7251"; - - /* I2C address as per ov7251.txt linux documentation */ - reg = <0x60>; - - /* CAM3_RST_N */ - enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&cam3_default>; - - clocks = <&clock_camcc CAM_CC_MCLK3_CLK>; - clock-names = "xclk"; - clock-frequency = <24000000>; - - /* - * The &vreg_s4a_1p8 trace always powered on. - * - * The 2.8V vdda-supply regulator is enabled when the - * vreg_s4a_1p8 trace is pulled high. - * It too is represented by a fixed regulator. - * - * No 1.2V vddd-supply regulator is used. - */ - vdddo-supply = <&vreg_lvs1a_1p8>; - vdda-supply = <&cam3_avdd_2v8>; - - status = "disabled"; - - port { - ov7251_ep: endpoint { - data-lanes = <0 1>; -/* remote-endpoint = <&csiphy3_ep>; */ - }; - }; - }; -}; - /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &qup_spi0_default { config {