[5/8] arm64: dts: qcom: msm8953: Add device tree for Xiaomi Redmi Note 4X

Message ID	20221116145616.17884-6-luca@z3ntu.xyz
State	Superseded
Headers	show Return-Path: <linux-arm-msm-owner@kernel.org> From: Luca Weiss <luca@z3ntu.xyz> To: linux-arm-msm@vger.kernel.org Cc: ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org, Adam Skladowski <a39.skl@gmail.com>, Andy Gross <agross@kernel.org>, Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konrad.dybcio@somainline.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Kees Cook <keescook@chromium.org>, Tony Luck <tony.luck@intel.com>, "Guilherme G. Piccoli" <gpiccoli@igalia.com>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hardening@vger.kernel.org Subject: [PATCH 5/8] arm64: dts: qcom: msm8953: Add device tree for Xiaomi Redmi Note 4X Date: Wed, 16 Nov 2022 15:56:06 +0100 Message-Id: <20221116145616.17884-6-luca@z3ntu.xyz> In-Reply-To: <20221116145616.17884-1-luca@z3ntu.xyz> References: <20221116145616.17884-1-luca@z3ntu.xyz> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	Add a bunch of msm8953 dts files \| expand [0/8] Add a bunch of msm8953 dts files [1/8] dt-bindings: arm: qcom: document new msm8953-family devices [2/8] arm64: dts: qcom: sdm450: Add device tree for Motorola Moto G6 [3/8] arm64: dts: qcom: msm8953: Add device tree for Motorola G5 Plus [4/8] arm64: dts: qcom: msm8953: Add device tree for Xiaomi Mi A2 Lite [5/8] arm64: dts: qcom: msm8953: Add device tree for Xiaomi Redmi Note 4X [6/8] arm64: dts: qcom: msm8953: Add device tree for Xiaomi Mi A1 [7/8] arm64: dts: qcom: msm8953: Add device tree for Xiaomi Redmi 5 Plus [8/8] arm64: dts: qcom: sdm632: Add device tree for Motorola G7 Power

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 6a80a36465f7..229fa48c8006 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-10.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-octagon-talkman.dtb diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts new file mode 100644 index 000000000000..dc0228c06e3b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts @@ -0,0 +1,331 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, The Linux Foundation. All rights reserved. + */ +/dts-v1/; + +#include "msm8953.dtsi" +#include "pm8953.dtsi" +#include "pmi8950.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + model = "Xiaomi Redmi Note 4X"; + compatible = "xiaomi,mido", "qcom,msm8953"; + chassis-type = "handset"; + qcom,msm-id = <293 0>; + qcom,board-id = <11 0>; + + aliases { + mmc0 = &sdhc_1; + mmc1 = &sdhc_2; + }; + + speaker_amp: audio-amplifier { + compatible = "awinic,aw8738"; + mode-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + awinic,mode = <5>; + sound-name-prefix = "Speaker Amp"; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer@90001000 { + compatible = "simple-framebuffer"; + reg = <0 0x90001000 0 (1920 * 1080 * 3)>; + + width = <1080>; + height = <1920>; + stride = <(1080 * 3)>; + format = "r8g8b8"; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_default>; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + reserved-memory { + /delete-node/ memory@85b00000; + + memory@84a00000 { + reg = <0x0 0x84a00000 0x0 0x1900000>; + no-map; + }; + + memory@90001000 { + reg = <0x0 0x90001000 0x0 (1080 * 1920 * 3)>; + no-map; + }; + + ramoops@9ff00000 { + compatible = "ramoops"; + reg = <0x0 0x9ff00000 0x0 0x00100000>; + console-size = <0x100000>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&hsusb_phy { + vdd-supply = <&pm8953_l3>; + vdda-pll-supply = <&pm8953_l7>; + vdda-phy-dpdm-supply = <&pm8953_l13>; + + status = "okay"; +}; + +&i2c_2 { + status = "okay"; + + led-controller@45 { + compatible = "awinic,aw2013"; + reg = <0x45>; + + vcc-supply = <&pm8953_l10>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_INDICATOR; + led-max-microamp = <5000>; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + led-max-microamp = <5000>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_INDICATOR; + led-max-microamp = <5000>; + }; + }; +}; + +&i2c_3 { + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + + interrupt-parent = <&tlmm>; + interrupts = <65 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_active>; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + + vcc-supply = <&pm8953_l10>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <1920>; + }; +}; + +&pm8953_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8953-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_l1-supply = <&pm8953_s3>; + vdd_l2_l3-supply = <&pm8953_s3>; + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; + vdd_l23-supply = <&pm8953_s3>; + + pm8953_s1: s1 { + regulator-min-microvolt = <863000>; + regulator-max-microvolt = <1152000>; + }; + + pm8953_s3: s3 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1224000>; + }; + + pm8953_s4: s4 { + regulator-min-microvolt = <1896000>; + regulator-max-microvolt = <2048000>; + }; + + pm8953_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + pm8953_l2: l2 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + + pm8953_l3: l3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + + pm8953_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l6: l6 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1900000>; + }; + + pm8953_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8953_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8953_l10: l10 { + regulator-always-on; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l13: l13 { + regulator-min-microvolt = <3125000>; + regulator-max-microvolt = <3125000>; + }; + + pm8953_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l19: l19 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8953_l22: l22 { + regulator-always-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l23: l23 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8953_l8>; + vqmmc-supply = <&pm8953_l5>; + + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + vmmc-supply = <&pm8953_l11>; + vqmmc-supply = <&pm8953_l12>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <135 4>; + + ts_int_active: ts-int-active-state { + pins = "gpio65"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; +};

[5/8] arm64: dts: qcom: msm8953: Add device tree for Xiaomi Redmi Note 4X

Commit Message

Patch