From patchwork Thu Nov 10 10:33:44 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Baryshkov X-Patchwork-Id: 623398 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 7E587C43217 for ; Thu, 10 Nov 2022 10:34:01 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230110AbiKJKeA (ORCPT ); Thu, 10 Nov 2022 05:34:00 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58852 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230132AbiKJKd5 (ORCPT ); Thu, 10 Nov 2022 05:33:57 -0500 Received: from mail-lf1-x12e.google.com (mail-lf1-x12e.google.com [IPv6:2a00:1450:4864:20::12e]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 24E74663E8 for ; Thu, 10 Nov 2022 02:33:56 -0800 (PST) Received: by mail-lf1-x12e.google.com with SMTP id g12so2376769lfh.3 for ; Thu, 10 Nov 2022 02:33:56 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=gfpRMK7MvLu2RRLRwF3zgwctmRqNQneOnndqnXYbSRc=; b=RVc/2vIPUpvf3pvXLhalBtRYqngL31vSTb8Am3mMiN1yKcyOdGnH9KrX4WR9T1Kn3l dehEcR278OM4YAwGiJItA4xNS0VLSI86cv8y4NAvrOGwfIk6L/s1XGkMJj1CYDURn9TB ClOz5O7saQbx62XK3cwtRW3x0OEqJRsXSyUDzTubUyS4LPDbJgU5idF3ueyQxUNnF4N0 WYRTLBgFNCl1HiXcWdpXPu70ACKrWW0YbIOHqRT2OvjnyWMPN5wJ7kn3FZALAuRNHtIR E3GTyy374/pLHM8+TQSvBdDDUhbruqTIG1Cq6Vs87ACyxYE1ezcuILH5BniNyVuOgLzg W73Q== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=gfpRMK7MvLu2RRLRwF3zgwctmRqNQneOnndqnXYbSRc=; b=Q8am5iFnbzfF9uZZoJz2PvxbkOFh7ph3SmhyeyBGIabWi1uUX9cdomCkxoZx58Be5c aQfPbFVKFP63zAreI4PoZ7OgXUhlP5HvlWol1yxUGcCiCHcN/WBjBfkkg5AbN+0IWaXm tuOfMVYOBfmEO6LhmXBPVu5I9xXIp1gRR5aGz/rCqhBroctCYws7XDXNZ5mw4KDfwNkZ Y3rP5Fos2ubdLPlV6hTQ7JyMaT54EHz4l4+4sfCRfdquEWO3oja6sftZCeGKFo6rMdG0 4TaGV/P1Fhy1NJGwMCt8qLF27P/IGUGJ6zZ57XiSd8rB6wBtVe6EAtXlna4PQ8DIZ57Y finQ== X-Gm-Message-State: ACrzQf0+O8eRsZbL9Qvvo5O53vc5cVZAfJLX0TGqFlQThnHCWZaeJcjV stAVHUxKrnM3wtLoaB207/BKiw== X-Google-Smtp-Source: AMsMyM74vXk34UFRIojbN2i+xanMGDW/uaM0OWpUKoocVYAE61RVEmDaMs71/atrouWLIgE+gsbHTg== X-Received: by 2002:ac2:44b6:0:b0:4a2:5084:6163 with SMTP id c22-20020ac244b6000000b004a250846163mr20961502lfm.446.1668076434466; Thu, 10 Nov 2022 02:33:54 -0800 (PST) Received: from localhost.localdomain ([195.165.23.90]) by smtp.gmail.com with ESMTPSA id p22-20020ac246d6000000b00498f32ae907sm2687837lfo.95.2022.11.10.02.33.53 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 10 Nov 2022 02:33:54 -0800 (PST) From: Dmitry Baryshkov To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Jingoo Han , Gustavo Pimentel , Lorenzo Pieralisi , =?utf-8?q?Krzysztof_Wilczy?= =?utf-8?q?=C5=84ski?= , Bjorn Helgaas , Vinod Koul , Kishon Vijay Abraham I Cc: Philipp Zabel , Johan Hovold , linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org, linux-phy@lists.infradead.org, devicetree@vger.kernel.org Subject: [PATCH v2 7/8] arm64: dts: qcom: sm8350: add PCIe devices Date: Thu, 10 Nov 2022 13:33:44 +0300 Message-Id: <20221110103345.729018-8-dmitry.baryshkov@linaro.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20221110103345.729018-1-dmitry.baryshkov@linaro.org> References: <20221110103345.729018-1-dmitry.baryshkov@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add PCIe0 and PCIe1 (and corresponding PHY) devices found on SM8350 platform. The PCIe0 is a 1-lane Gen3 host, PCIe1 is a 2-lane Gen3 host. Signed-off-by: Dmitry Baryshkov --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 246 ++++++++++++++++++++++++++- 1 file changed, 244 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index a86d9ea93b9d..90a26f406bf3 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -656,8 +656,8 @@ gcc: clock-controller@100000 { "usb3_uni_phy_sec_gcc_usb30_pipe_clk"; clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>, - <0>, - <0>, + <&pcie0_phy>, + <&pcie1_phy>, <0>, <0>, <0>, @@ -1582,6 +1582,202 @@ mmss_noc: interconnect@1740000 { qcom,bcm-voters = <&apps_bcm_voter>; }; + pcie0: pci@1c00000 { + compatible = "qcom,pcie-sm8350"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu", + "ddrss_sf_tbu", + "aggre0", + "aggre1"; + + iommus = <&apps_smmu 0x1c00 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, + <0x100 &apps_smmu 0x1c01 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + + status = "disabled"; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sm8350-qmp-gen3x1-pcie-phy"; + reg = <0 0x01c06000 0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_CLKREF_EN>, + <&gcc GCC_PCIE0_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", "pipe"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE0_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + #clock-cells = <0>; + clock-output-names = "pcie_0_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie1: pci@1c08000 { + compatible = "qcom,pcie-sm8350"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>; + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu", + "ddrss_sf_tbu", + "aggre1"; + + iommus = <&apps_smmu 0x1c80 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_1_GDSC>; + + phys = <&pcie1_phy>; + phy-names = "pciephy"; + + perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0f000 { + compatible = "qcom,sm8350-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c0e000 0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_CLKREF_EN>, + <&gcc GCC_PCIE1_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", "pipe"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE1_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + #clock-cells = <0>; + clock-output-names = "pcie_1_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + lpass_ag_noc: interconnect@3c40000 { compatible = "qcom,sm8350-lpass-ag-noc"; reg = <0 0x03c40000 0 0xf080>; @@ -1761,6 +1957,52 @@ tlmm: pinctrl@f100000 { gpio-ranges = <&tlmm 0 0 204>; wakeup-parent = <&pdc>; + pcie0_default_state: pcie0-default-state { + perst-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio95"; + function = "pcie0_clkreqn"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default-state { + perst-pins { + pins = "gpio97"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio98"; + function = "pcie1_clkreqn"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + qup_uart3_default_state: qup-uart3-default-state { rx-pins { pins = "gpio18";