@@ -28,6 +28,7 @@
#define QPHY_V2_PCS_FLL_CNT_VAL_L 0x0c8
#define QPHY_V2_PCS_FLL_CNT_VAL_H_TOL 0x0cc
#define QPHY_V2_PCS_FLL_MAN_CODE 0x0d0
+#define QPHY_V2_PCS_LFPS_RXTERM_IRQ_STATUS 0x178
#define QPHY_V2_PCS_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB 0x1a8
#define QPHY_V2_PCS_OSC_DTCT_ACTIONS 0x1ac
#define QPHY_V2_PCS_RX_SIGDET_LVL 0x1d8
@@ -56,9 +56,6 @@
/* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */
#define IRQ_CLEAR BIT(0)
-/* QPHY_PCS_LFPS_RXTERM_IRQ_STATUS register bits */
-#define RCVR_DETECT BIT(0)
-
/* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */
#define CLAMP_EN BIT(0) /* enables i/o clamp_n */
@@ -111,7 +108,6 @@ enum qphy_reg_layout {
QPHY_PCS_STATUS,
QPHY_PCS_AUTONOMOUS_MODE_CTRL,
QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR,
- QPHY_PCS_LFPS_RXTERM_IRQ_STATUS,
QPHY_PCS_POWER_DOWN_CONTROL,
/* PCS_MISC registers */
QPHY_PCS_MISC_TYPEC_CTRL,
@@ -125,7 +121,6 @@ static const unsigned int usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_PCS_STATUS] = 0x17c,
[QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d4,
[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0d8,
- [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x178,
[QPHY_PCS_POWER_DOWN_CONTROL] = 0x04,
};
@@ -135,7 +130,6 @@ static const unsigned int qmp_v3_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_PCS_STATUS] = 0x174,
[QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d8,
[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0dc,
- [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
[QPHY_PCS_POWER_DOWN_CONTROL] = 0x04,
};
The QPHY_PCS_LFPS_RXTERM_IRQ_STATUS register is not used, remove it from register layout. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/phy/qualcomm/phy-qcom-qmp-pcs-v2.h | 1 + drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 6 ------ 2 files changed, 1 insertion(+), 6 deletions(-)