diff mbox series

[v2,09/12] phy: qcom-qmp-usb: rework regs layout arrays

Message ID 20220930112926.638543-10-dmitry.baryshkov@linaro.org
State Superseded
Headers show
Series phy: qcom-qmp: rework register layout tables | expand

Commit Message

Dmitry Baryshkov Sept. 30, 2022, 11:29 a.m. UTC 
Use symbolic names for the values inside reg layout arrays. New register
names are added following the PCS register layout that is used by the
particular PHY.

Note: ipq8074 tables appear to use a mixture of v2 and v3 registers.
This might need additional fixes.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v2.h |  3 ++
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c    | 52 +++++++++++-----------
 2 files changed, 29 insertions(+), 26 deletions(-)
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v2.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v2.h
index c7e8e2a28e6e..bf36399d0057 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v2.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v2.h
@@ -28,7 +28,10 @@ 
 #define QPHY_V2_PCS_FLL_CNT_VAL_L			0x0c8
 #define QPHY_V2_PCS_FLL_CNT_VAL_H_TOL			0x0cc
 #define QPHY_V2_PCS_FLL_MAN_CODE			0x0d0
+#define QPHY_V2_PCS_AUTONOMOUS_MODE_CTRL		0x0d4
+#define QPHY_V2_PCS_LFPS_RXTERM_IRQ_CLEAR		0x0d8
 #define QPHY_V2_PCS_LFPS_RXTERM_IRQ_STATUS		0x178
+#define QPHY_V2_PCS_USB_PCS_STATUS			0x17c /* USB */
 #define QPHY_V2_PCS_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB	0x1a8
 #define QPHY_V2_PCS_OSC_DTCT_ACTIONS			0x1ac
 #define QPHY_V2_PCS_RX_SIGDET_LVL			0x1d8
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index 0b5015c7bd19..2e3ccf3da0e4 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -113,42 +113,42 @@  enum qphy_reg_layout {
 	QPHY_LAYOUT_SIZE
 };
 
-static const unsigned int usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
-	[QPHY_SW_RESET]			= 0x00,
-	[QPHY_START_CTRL]		= 0x08,
-	[QPHY_PCS_STATUS]		= 0x17c,
-	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= 0x0d4,
-	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR]  = 0x0d8,
-	[QPHY_PCS_POWER_DOWN_CONTROL]	= 0x04,
+static const unsigned int qmp_v2_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
+	[QPHY_SW_RESET]			= QPHY_V2_PCS_SW_RESET,
+	[QPHY_START_CTRL]		= QPHY_V2_PCS_START_CONTROL,
+	[QPHY_PCS_STATUS]		= QPHY_V2_PCS_USB_PCS_STATUS,
+	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= QPHY_V2_PCS_AUTONOMOUS_MODE_CTRL,
+	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V2_PCS_LFPS_RXTERM_IRQ_CLEAR,
+	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V2_PCS_POWER_DOWN_CONTROL,
 };
 
 static const unsigned int qmp_v3_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
-	[QPHY_SW_RESET]			= 0x00,
-	[QPHY_START_CTRL]		= 0x08,
-	[QPHY_PCS_STATUS]		= 0x174,
-	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= 0x0d8,
-	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR]  = 0x0dc,
-	[QPHY_PCS_POWER_DOWN_CONTROL]	= 0x04,
+	[QPHY_SW_RESET]			= QPHY_V3_PCS_SW_RESET,
+	[QPHY_START_CTRL]		= QPHY_V3_PCS_START_CONTROL,
+	[QPHY_PCS_STATUS]		= QPHY_V3_PCS_PCS_STATUS,
+	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= QPHY_V3_PCS_AUTONOMOUS_MODE_CTRL,
+	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V3_PCS_LFPS_RXTERM_IRQ_CLEAR,
+	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V3_PCS_POWER_DOWN_CONTROL,
 };
 
 static const unsigned int qmp_v4_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
-	[QPHY_SW_RESET]			= 0x00,
-	[QPHY_START_CTRL]		= 0x44,
-	[QPHY_PCS_STATUS]		= 0x14,
-	[QPHY_PCS_POWER_DOWN_CONTROL]	= 0x40,
+	[QPHY_SW_RESET]			= QPHY_V4_PCS_SW_RESET,
+	[QPHY_START_CTRL]		= QPHY_V4_PCS_START_CONTROL,
+	[QPHY_PCS_STATUS]		= QPHY_V4_PCS_PCS_STATUS1,
+	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V4_PCS_POWER_DOWN_CONTROL,
 
 	/* In PCS_USB */
-	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= 0x008,
-	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x014,
+	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= QPHY_V4_PCS_USB3_AUTONOMOUS_MODE_CTRL,
+	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V4_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR,
 };
 
 static const unsigned int qcm2290_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
-	[QPHY_SW_RESET]			= 0x00,
-	[QPHY_PCS_POWER_DOWN_CONTROL]	= 0x04,
-	[QPHY_START_CTRL]		= 0x08,
-	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= 0xd8,
-	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0xdc,
-	[QPHY_PCS_STATUS]		= 0x174,
+	[QPHY_SW_RESET]			= QPHY_V3_PCS_SW_RESET,
+	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V3_PCS_POWER_DOWN_CONTROL,
+	[QPHY_START_CTRL]		= QPHY_V3_PCS_START_CONTROL,
+	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= QPHY_V3_PCS_AUTONOMOUS_MODE_CTRL,
+	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V3_PCS_LFPS_RXTERM_IRQ_CLEAR,
+	[QPHY_PCS_STATUS]		= QPHY_V3_PCS_PCS_STATUS,
 };
 
 static const struct qmp_phy_init_tbl ipq8074_usb3_serdes_tbl[] = {
@@ -1633,7 +1633,7 @@  static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
 	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
 	.vreg_list		= qmp_phy_vreg_l,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
-	.regs			= usb3phy_regs_layout,
+	.regs			= qmp_v2_usb3phy_regs_layout,
 
 	.start_ctrl		= SERDES_START | PCS_START,
 	.pwrdn_ctrl		= SW_PWRDN,