From patchwork Sat Sep 24 15:29:37 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Luca Weiss X-Patchwork-Id: 609753 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9C926C07E9D for ; Sat, 24 Sep 2022 15:31:11 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233891AbiIXPbI (ORCPT ); Sat, 24 Sep 2022 11:31:08 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:50628 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233974AbiIXPao (ORCPT ); Sat, 24 Sep 2022 11:30:44 -0400 Received: from mail.z3ntu.xyz (mail.z3ntu.xyz [128.199.32.197]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 2F35867C93; Sat, 24 Sep 2022 08:30:32 -0700 (PDT) Received: from g550jk.fritz.box (212095005231.public.telering.at [212.95.5.231]) by mail.z3ntu.xyz (Postfix) with ESMTPSA id D8CF5C7003; Sat, 24 Sep 2022 15:30:29 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=z3ntu.xyz; s=z3ntu; t=1664033430; bh=OZG7z5hLqaeBf8O4EfK4fVgLHVI2f8KChiL0yN6oMOM=; h=From:To:Cc:Subject:Date:In-Reply-To:References; b=L2lsAbZYEVrRR7Xbm/ACWJASiY0prNtCyYvCyqzpfT7XNBEizQLTz51lAasnvjnFk yKb8WMuf7zxZrK55FfyttiZQ7TOFyjU2WDJ/YFWFqIlA+3/VYZqN5AaAhiKPWqpAZl umnswlYxbDDFjWFJpCrSyYMcgb9npoQ+K5AtMGYo= From: Luca Weiss To: linux-arm-msm@vger.kernel.org Cc: ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org, Luca Weiss , Arnd Bergmann , Olof Johansson , soc@kernel.org, Rob Herring , Krzysztof Kozlowski , Andy Gross , Bjorn Andersson , Konrad Dybcio , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 2/2] ARM: dts: qcom: Add support for Huawei Watch Date: Sat, 24 Sep 2022 17:29:37 +0200 Message-Id: <20220924152937.4076-2-luca@z3ntu.xyz> X-Mailer: git-send-email 2.37.3 In-Reply-To: <20220924152937.4076-1-luca@z3ntu.xyz> References: <20220924152937.4076-1-luca@z3ntu.xyz> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add support for this smartwatch, based on Snapdragon 400 SoC. Currently supported functionality: * Internal storage * USB * Charger * Power button * Bluetooth * Wifi Signed-off-by: Luca Weiss --- Changes in v2: * Address review comments from v1: * newlines between reserved-memory and regulator nodes (Konrad) * status as last property in nodes (Konrad) * pm8226-regulators node name change (Krzysztof) * Add -pins suffix to state nodes (Krzysztof) arch/arm/boot/dts/Makefile | 1 + .../boot/dts/qcom-apq8026-huawei-sturgeon.dts | 376 ++++++++++++++++++ 2 files changed, 377 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 3bc6bd5c8238..55087f16d718 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1026,6 +1026,7 @@ dtb-$(CONFIG_ARCH_OXNAS) += \ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8016-sbc.dtb \ qcom-apq8026-asus-sparrow.dtb \ + qcom-apq8026-huawei-sturgeon.dtb \ qcom-apq8026-lg-lenok.dtb \ qcom-apq8060-dragonboard.dtb \ qcom-apq8064-cm-qs600.dtb \ diff --git a/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts b/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts new file mode 100644 index 000000000000..d64096028ab1 --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8026-huawei-sturgeon.dts @@ -0,0 +1,376 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Luca Weiss + */ + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "qcom-pm8226.dtsi" + +/delete-node/ &adsp_region; + +/ { + model = "Huawei Watch"; + compatible = "huawei,sturgeon", "qcom,apq8026"; + chassis-type = "watch"; + qcom,msm-id = <199 0x20000>; + qcom,board-id = <8 4>; + + reserved-memory { + sbl_region: sbl@2f00000 { + reg = <0x02f00000 0x100000>; + no-map; + }; + + external_image_region: external-image@3100000 { + reg = <0x3100000 0x200000>; + no-map; + }; + + peripheral_region: peripheral@3300000 { + reg = <0x3300000 0x600000>; + no-map; + }; + + adsp_region: adsp@3900000 { + reg = <0x3900000 0x1400000>; + no-map; + }; + + modem_region: modem@4d00000 { + reg = <0x4d00000 0x1b00000>; + no-map; + }; + + modem_efs_region: modem-efs@7f00000 { + reg = <0x7f00000 0x100000>; + no-map; + }; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_regulator_default_state>; + }; +}; + +&adsp { + status = "okay"; +}; + +&blsp1_i2c5 { + clock-frequency = <384000>; + + status = "okay"; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l19>; + vio-supply = <&pm8226_lvs1>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_default_state>; + + syna,startup-delay-ms = <160>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart4_default_state>; + + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43430a0-bt"; + max-speed = <3000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&bluetooth_default_state>; + + host-wakeup-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&tlmm 67 GPIO_ACTIVE_HIGH>; + }; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + + pm8226_l15: l15 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; + + status = "okay"; +}; + +&sdhc_3 { + max-frequency = <100000000>; + non-removable; + + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pm8226_l6>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + wifi@1 { + compatible = "brcm,bcm43430a0-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_hostwake_default_state>; + }; +}; + +&smbb { + qcom,fast-charge-safe-voltage = <4370000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,minimum-input-voltage = <4350000>; + qcom,fast-charge-current-limit = <300000>; + qcom,fast-charge-safe-current = <600000>; + qcom,auto-recharge-threshold-voltage = <4240000>; +}; + +&tlmm { + blsp1_uart4_default_state: blsp1-uart4-default-state { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + function = "blsp_uart4"; + drive-strength = <8>; + bias-disable; + }; + + bluetooth_default_state: bluetooth-default-state { + pins = "gpio63", "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + touch_default_state: touch-default-state { + irq-pins { + pins = "gpio17"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + reset-pins { + pins = "gpio16"; + function = "gpio"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + wlan_hostwake_default_state: wlan-hostwake-default-state { + pins = "gpio66"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + wlan_regulator_default_state: wlan-regulator-default-state { + pins = "gpio110"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +&usb { + extcon = <&smbb>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&smbb>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +};