new file mode 100644
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "sm4250.dtsi"
+
+/ {
+ model = "OnePlus Nord N100";
+ compatible = "oneplus,billie2", "qcom,sm4250";
+
+ /* required for bootloader to select correct board */
+ qcom,msm-id = <0x1a1 0x10000 0x1bc 0x10000>;
+ qcom,board-id = <0x1000b 0x00>;
+
+ aliases {
+ };
+
+ chosen {
+ bootargs = "earlycon=tty0 console=tty0 clk_ignore_unused pd_ignore_unused";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ stdout-path = "framebuffer0";
+
+ framebuffer0: framebuffer@9d400000 {
+ compatible = "simple-framebuffer";
+ reg = <0 0x5c000000 0 (1600 * 720 * 4)>;
+ width = <720>;
+ height = <1600>;
+ stride = <(720 * 4)>;
+ format = "a8r8g8b8";
+ status= "okay";
+ };
+ };
+
+ reserved-memory {
+ mtp_mem: memory@cc300000 {
+ reg = <0x00 0xcc300000 0x00 0xb00000>;
+ no-map;
+ };
+
+ param_mem: memory@cc200000 {
+ reg = <0x00 0xcc200000 0x00 0x100000>;
+ no-map;
+ };
+
+ bootloader_log_mem: memory@5fff7000 {
+ reg = <0x00 0x5fff7000 0x00 0x8000>;
+ no-map;
+ };
+
+ ramoops@cbe00000 {
+ compatible = "ramoops";
+ reg = <0x0 0xcbe00000 0x0 0x400000>;
+ record-size = <0x40000>;
+ pmsg-size = <0x200000>;
+ console-size = <0x40000>;
+ ftrace-size = <0x40000>;
+ };
+ };
+};
+
+&usb3 {
+ status = "okay";
+};
+
+&hsusb_phy {
+ status = "okay";
+ vdd-supply = <&vreg_l4a>;
+ vdda-pll-supply = <&vreg_l12a>;
+ vdda-phy-dpdm-supply = <&vreg_l15a>;
+
+};
+
+&tlmm {
+ gpio-reserved-ranges = <14 4>;
+};
+
+&sdhc_2 {
+ status = "okay";
+ vmmc-supply = <&vreg_l22a>;
+ vqmmc-supply = <&vreg_l5a>;
+
+ cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_state_on>;
+ pinctrl-1 = <&sdc2_state_off>;
+};
+
+&ufs_mem_hc {
+ status = "okay";
+ vcc-supply = <&vreg_l24a>;
+ vcc-max-microamp = <600000>;
+ vccq2-supply = <&vreg_l11a>;
+ vccq2-max-microamp = <600000>;
+};
+
+&ufs_mem_phy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l4a>;
+ vdda-pll-supply = <&vreg_l12a>;
+ vddp-ref-clk-supply = <&vreg_l18a>;
+};
+
+&rpm_requests {
+ pm6125-regulators {
+ compatible = "qcom,rpm-pm6125-regulators";
+
+ vreg_s6a: s6 {
+ regulator-min-microvolt = <320000>;
+ regulator-max-microvolt = <1456000>;
+ };
+
+ vreg_s7a: s7 {
+ regulator-min-microvolt = <1280000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ vreg_s8a: s8 {
+ regulator-min-microvolt = <1064000>;
+ regulator-max-microvolt = <1304000>;
+ };
+
+ vreg_l1a: l1 {
+ regulator-min-microvolt = <952000>;
+ regulator-max-microvolt = <1152000>;
+ };
+
+ vreg_l4a: l4 {
+ regulator-min-microvolt = <488000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ vreg_l5a: l5 {
+ regulator-min-microvolt = <1648000>;
+ regulator-max-microvolt = <3056000>;
+ };
+
+ vreg_l6a: l6 {
+ regulator-min-microvolt = <576000>;
+ regulator-max-microvolt = <656000>;
+ };
+
+ vreg_l7a: l7 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1304000>;
+ };
+
+ vreg_l8a: l8 {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <728000>;
+ };
+
+ vreg_l9a: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ vreg_l10a: l10 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1904000>;
+ };
+
+ vreg_l11a: l11 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1952000>;
+ };
+
+ vreg_l12a: l12 {
+ regulator-min-microvolt = <1624000>;
+ regulator-max-microvolt = <1984000>;
+ };
+
+ vreg_l13a: l13 {
+ regulator-min-microvolt = <1504000>;
+ regulator-max-microvolt = <1952000>;
+ };
+
+ vreg_l14a: l14 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1904000>;
+ };
+
+ vreg_l15a: l15 {
+ regulator-min-microvolt = <2920000>;
+ regulator-max-microvolt = <3232000>;
+ };
+
+ vreg_l16a: l16 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1904000>;
+ };
+
+ vreg_l17a: l17 {
+ regulator-min-microvolt = <1152000>;
+ regulator-max-microvolt = <1304000>;
+ };
+
+ vreg_l18a: l18 {
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1304000>;
+ };
+
+ vreg_l19a: l19 {
+ regulator-min-microvolt = <1624000>;
+ regulator-max-microvolt = <3304000>;
+ };
+
+ vreg_l20a: l20 {
+ regulator-min-microvolt = <1624000>;
+ regulator-max-microvolt = <3304000>;
+ };
+
+ vreg_l21a: l21 {
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3544000>;
+ };
+
+ vreg_l22a: l22 {
+ regulator-min-microvolt = <2952000>;
+ regulator-max-microvolt = <3304000>;
+ };
+
+ vreg_l23a: l23 {
+ regulator-min-microvolt = <3296000>;
+ regulator-max-microvolt = <3304000>;
+ };
+
+ vreg_l24a: l24 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <3544000>;
+ };
+ };
+};
Add initial support for OnePlus Nord N100, based on SM4250. Currently working: - boots - usb - buildin flash storage (UFS) - SD card reader Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> --- .../boot/dts/qcom/sm4250-oneplus-billie2.dts | 240 ++++++++++++++++++ 1 file changed, 240 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts