diff mbox series

[RFT,07/12] arm64: dts: qcom: msm8994: switch TCSR mutex to MMIO

Message ID 20220817131415.714340-8-krzysztof.kozlowski@linaro.org
State Accepted
Commit 9e826e05061c61d84217bbe436b4ef0bedbfe458
Headers show
Series ARM/hwlock: qcom: switch TCSR mutex to MMIO | expand

Commit Message

Krzysztof Kozlowski Aug. 17, 2022, 1:14 p.m. UTC
The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap).  This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:

  qcom/msm8994-sony-xperia-kitakami-suzuran.dtb: hwlock: 'reg' is a required property
  qcom/msm8994-sony-xperia-kitakami-suzuran.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8994.dtsi | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index 8bc6c070e306..6a9bca6c2c5f 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -164,12 +164,6 @@  memory@80000000 {
 		reg = <0 0x80000000 0 0>;
 	};
 
-	tcsr_mutex: hwlock {
-		compatible = "qcom,tcsr-mutex";
-		syscon = <&tcsr_mutex_regs 0 0x80>;
-		#hwlock-cells = <1>;
-	};
-
 	pmu {
 		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>;
@@ -762,9 +756,10 @@  spmi_bus: spmi@fc4c0000 {
 			#interrupt-cells = <4>;
 		};
 
-		tcsr_mutex_regs: syscon@fd484000 {
-			compatible = "syscon";
-			reg = <0xfd484000 0x2000>;
+		tcsr_mutex: hwlock@fd484000 {
+			compatible = "qcom,msm8994-tcsr-mutex", "qcom,tcsr-mutex";
+			reg = <0xfd484000 0x1000>;
+			#hwlock-cells = <1>;
 		};
 
 		tlmm: pinctrl@fd510000 {