Message ID | 20220811214107.1074343-4-quic_eberman@quicinc.com |
---|---|
State | Superseded |
Headers | show |
Series | Drivers for gunyah hypervisor | expand |
On Thu, 11 Aug 2022 14:40:58 -0700, Elliot Berman wrote: > When Linux is booted as a guest under the Gunyah hypervisor, the Gunyah > Resource Manager applies a devicetree overlay describing the virtual > platform configuration of the guest VM, such as the message queue > capability IDs for communicating with the Resource Manager. This > information is not otherwise discoverable by a VM: the Gunyah hypervisor > core does not provide a direct interface to discover capability IDs nor > a way to communicate with RM without having already known the > corresponding message queue capability ID. Add the DT bindings that > Gunyah adheres for the hypervisor node and message queues. > > Signed-off-by: Elliot Berman <quic_eberman@quicinc.com> > --- > Changes since v2: > - Add newlines as suggested > - Fixed typo in example (gunyah-resource-mgr@0 -> gunyah-resource-mgr@1) > > .../bindings/firmware/gunyah-hypervisor.yaml | 87 +++++++++++++++++++ > MAINTAINERS | 1 + > 2 files changed, 88 insertions(+) > create mode 100644 Documentation/devicetree/bindings/firmware/gunyah-hypervisor.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/firmware/gunyah-hypervisor.yaml: properties:compatible: [{'items': [{'const': 'gunyah-hypervisor-1.0'}, {'const': 'gunyah-hypervisor'}]}] is not of type 'object', 'boolean' from schema $id: http://json-schema.org/draft-07/schema# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/firmware/gunyah-hypervisor.yaml: patternProperties:^gunyah-resource-mgr(@.*)?:properties:compatible: [{'items': [{'const': 'gunyah-resource-manager-1-0'}, {'const': 'gunyah-resource-manager'}]}] is not of type 'object', 'boolean' from schema $id: http://json-schema.org/draft-07/schema# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/firmware/gunyah-hypervisor.yaml: ignoring, error in schema: properties: compatible Documentation/devicetree/bindings/firmware/gunyah-hypervisor.example.dtb:0:0: /example-0/hypervisor: failed to match any schema with compatible: ['gunyah-hypervisor-1.0', 'gunyah-hypervisor'] Documentation/devicetree/bindings/firmware/gunyah-hypervisor.example.dtb:0:0: /example-0/hypervisor: failed to match any schema with compatible: ['gunyah-hypervisor-1.0', 'gunyah-hypervisor'] Documentation/devicetree/bindings/firmware/gunyah-hypervisor.example.dtb:0:0: /example-0/hypervisor/gunyah-resource-mgr@0: failed to match any schema with compatible: ['gunyah-resource-manager-1-0', 'gunyah-resource-manager'] Documentation/devicetree/bindings/firmware/gunyah-hypervisor.example.dtb:0:0: /example-0/hypervisor/gunyah-resource-mgr@0: failed to match any schema with compatible: ['gunyah-resource-manager-1-0', 'gunyah-resource-manager'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
diff --git a/Documentation/devicetree/bindings/firmware/gunyah-hypervisor.yaml b/Documentation/devicetree/bindings/firmware/gunyah-hypervisor.yaml new file mode 100644 index 000000000000..8edcd3915f3c --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/gunyah-hypervisor.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/firmware/gunyah-hypervisor.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Gunyah Hypervisor + +maintainers: + - Murali Nalajala <quic_mnalajal@quicinc.com> + - Elliot Berman <quic_eberman@quicinc.com> + +description: |+ + On systems which support devicetree, Gunyah generates and overlays a deviceetree overlay which + describes the basic configuration of the hypervisor. Virtual machines use this information to determine + the capability IDs of the message queues used to communicate with the Gunyah Resource Manager. + See also: https://github.com/quic/gunyah-resource-manager/blob/develop/src/vm_creation/dto_construct.c + +properties: + compatible: + - items: + - const: gunyah-hypervisor-1.0 + - const: gunyah-hypervisor + + "#address-cells": + description: Number of cells needed to represent 64-bit capability IDs. + const: 2 + + "#size-cells": + description: must be 0, because capability IDs are not memory address + ranges and do not have a size. + const: 0 + +patternProperties: + "^gunyah-resource-mgr(@.*)?": + type: object + description: + Resource Manager node which is required to communicate to Resource + Manager VM using Gunyah Message Queues. + + properties: + compatible: + - items: + - const: gunyah-resource-manager-1-0 + - const: gunyah-resource-manager + + reg: + items: + - description: Gunyah capability ID of the TX message queue + - description: Gunyah capability ID of the RX message queue + + interrupts: + items: + - description: Interrupt for the TX message queue + - description: Interrupt for the RX message queue + + additionalProperties: false + + required: + - compatible + - reg + - interrupts + +additionalProperties: false + +required: + - compatible + - "#address-cells" + - "#size-cells" + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + hypervisor { + #address-cells = <2>; + #size-cells = <0>; + compatible = "gunyah-hypervisor-1.0", "gunyah-hypervisor"; + + gunyah-resource-mgr@0 { + compatible = "gunyah-resource-manager-1-0", "gunyah-resource-manager"; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>, /* TX full IRQ */ + <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; /* RX empty IRQ */ + reg = <0x00000000 0x00000000>, <0x00000000 0x00000001>; + /* TX, RX cap ids */ + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 24d1660bbafa..77bb7833d561 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8739,6 +8739,7 @@ M: Elliot Berman <quic_eberman@quicinc.com> M: Murali Nalajala <quic_mnalajal@quicinc.com> L: linux-arm-msm@vger.kernel.org S: Supported +F: Documentation/devicetree/bindings/firmware/gunyah-hypervisor.yaml F: Documentation/virt/gunyah/ HABANALABS PCI DRIVER
When Linux is booted as a guest under the Gunyah hypervisor, the Gunyah Resource Manager applies a devicetree overlay describing the virtual platform configuration of the guest VM, such as the message queue capability IDs for communicating with the Resource Manager. This information is not otherwise discoverable by a VM: the Gunyah hypervisor core does not provide a direct interface to discover capability IDs nor a way to communicate with RM without having already known the corresponding message queue capability ID. Add the DT bindings that Gunyah adheres for the hypervisor node and message queues. Signed-off-by: Elliot Berman <quic_eberman@quicinc.com> --- Changes since v2: - Add newlines as suggested - Fixed typo in example (gunyah-resource-mgr@0 -> gunyah-resource-mgr@1) .../bindings/firmware/gunyah-hypervisor.yaml | 87 +++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 88 insertions(+) create mode 100644 Documentation/devicetree/bindings/firmware/gunyah-hypervisor.yaml