diff mbox series

[1/4] arm64: dts: qcom: sdm845: switch usb_1 phy to use combo usb+dp phy

Message ID 20220810035424.2796777-2-bjorn.andersson@linaro.org
State New
Headers show
Series arm64: dts: qcom: Lenovo Yoga battery and DP support | expand

Commit Message

Bjorn Andersson Aug. 10, 2022, 3:54 a.m. UTC 
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Change sdm845's usb_1_qmpphy to use combo usb+dp phy bindings, rather
than just usb phy.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 25 ++++++++++++++++++-------
 1 file changed, 18 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index f0e286715d1b..eae307a4babf 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3922,9 +3922,10 @@  usb_2_hsphy: phy@88e3000 {
 		};
 
 		usb_1_qmpphy: phy@88e9000 {
-			compatible = "qcom,sdm845-qmp-usb3-phy";
+			compatible = "qcom,sdm845-qmp-usb3-dp-phy";
 			reg = <0 0x088e9000 0 0x18c>,
-			      <0 0x088e8000 0 0x10>;
+			      <0 0x088e8000 0 0x38>,
+			      <0 0x088ea000 0 0x40>;
 			status = "disabled";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -3936,11 +3937,11 @@  usb_1_qmpphy: phy@88e9000 {
 				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
 			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
 
-			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
-				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: phy@88e9200 {
+			usb_1_ssphy: usb3-phy@88e9200 {
 				reg = <0 0x088e9200 0 0x128>,
 				      <0 0x088e9400 0 0x200>,
 				      <0 0x088e9c00 0 0x218>,
@@ -3953,6 +3954,16 @@  usb_1_ssphy: phy@88e9200 {
 				clock-names = "pipe0";
 				clock-output-names = "usb3_phy_pipe_clk_src";
 			};
+
+			dp_phy: dp-phy@88ea200 {
+				reg = <0 0x088ea200 0 0x200>,
+				      <0 0x088ea400 0 0x200>,
+				      <0 0x088eaa00 0 0x200>,
+				      <0 0x088ea600 0 0x200>,
+				      <0 0x088ea800 0 0x200>;
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+			};
 		};
 
 		usb_2_qmpphy: phy@88eb000 {
@@ -4775,8 +4786,8 @@  dispcc: clock-controller@af00000 {
 				 <&dsi0_phy 1>,
 				 <&dsi1_phy 0>,
 				 <&dsi1_phy 1>,
-				 <0>,
-				 <0>;
+				 <&dp_phy 0>,
+				 <&dp_phy 1>;
 			clock-names = "bi_tcxo",
 				      "gcc_disp_gpll0_clk_src",
 				      "gcc_disp_gpll0_div_clk_src",