From patchwork Thu Jul 14 12:34:06 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 590957 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9938CC433EF for ; Thu, 14 Jul 2022 12:34:25 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S239319AbiGNMeY (ORCPT ); Thu, 14 Jul 2022 08:34:24 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:53044 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S239325AbiGNMeX (ORCPT ); Thu, 14 Jul 2022 08:34:23 -0400 Received: from relay07.th.seeweb.it (relay07.th.seeweb.it [IPv6:2001:4b7a:2000:18::168]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id E8AC957E36; Thu, 14 Jul 2022 05:34:21 -0700 (PDT) Received: from localhost.localdomain (abxj14.neoplus.adsl.tpnet.pl [83.9.3.14]) by m-r2.th.seeweb.it (Postfix) with ESMTPA id F3EB43F65D; Thu, 14 Jul 2022 14:34:18 +0200 (CEST) From: Konrad Dybcio To: ~postmarketos/upstreaming@lists.sr.ht Cc: martin.botka@somainline.org, angelogioacchino.delregno@somainline.org, marijn.suijten@somainline.org, jamipkettunen@somainline.org, Konrad Dybcio , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Kees Cook , Anton Vorontsov , Colin Cross , Tony Luck , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 5/5] arm64: dts: qcom: Add device tree for Sony Xperia 1 IV Date: Thu, 14 Jul 2022 14:34:06 +0200 Message-Id: <20220714123406.1919836-5-konrad.dybcio@somainline.org> X-Mailer: git-send-email 2.37.0 In-Reply-To: <20220714123406.1919836-1-konrad.dybcio@somainline.org> References: <20220714123406.1919836-1-konrad.dybcio@somainline.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add support for Sony Xperia 1 IV, a.k.a PDX223. This device is a part of the SoMC SM8450 Nagara platform and currently it is the only device based on that board, so no -common DTSI is created until (if?) other Nagara devices appear. This commit brings support for: * SD Card * USB (*including SuperSpeed*) * ADSP/CDSP/SLPI (modem remains untested for now) * Most regulators (some GPIO-enabled ones require PMIC GPIOs but trying to access any SPMI device crashes the device..) * Part of I2C-connected peripherals (notably no touch due to a driver bug) * PCIe0 (PCIe1 is unused) Do note display via simplefb is not supported, as the display is blanked upon exiting XBL. To create a working boot image, you need to run: cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/sm8450-sony-xperia-\ nagara-pdx223.dtb > .Image.gz-dtb mkbootimg \ --kernel .Image.gz-dtb \ --ramdisk some_initrd.img \ --pagesize 4096 \ --base 0x0 \ --kernel_offset 0x8000 \ --ramdisk_offset 0x1000000 \ --tags_offset 0x100 \ --cmdline "SOME_CMDLINE" \ --dtb_offset 0x1f00000 \ --header_version 1 \ --os_version 12 \ --os_patch_level 2022-06 \ # or newer -o boot.img-sony-xperia-pdx223 Then, you need to flash it on the device and get rid of all the vendor_boot/dtbo mess: // You have to either pull vbmeta{"","_system"} from // /dev/block/bootdevice/by-name/ or build one as a part of AOSP build process fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img fastboot --disable-verity --disable-verification flash vbmeta_system \ vbmeta_system.img fastboot flash boot boot.img-sony-xperia-pdx223 fastboot erase vendor_boot fastboot erase recovery fastboot flash dtbo emptydtbo.img fastboot reboot Where emptydtbo.img is a tiny file that consists of 2 bytes (all zeroes), doing a "fastboot erase" won't cut it, the bootloader will go crazy and things will fall apart when it tries to overlay random bytes from an empty partition onto a perfectly good appended DTB. Signed-off-by: Konrad Dybcio --- Changes since v1: - remove a stray blank line - use generic node names for CS35L41 - fix up indentation for sdhci-caps-mask arch/arm64/boot/dts/qcom/Makefile | 1 + .../qcom/sm8450-sony-xperia-nagara-pdx223.dts | 634 ++++++++++++++++++ 2 files changed, 635 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 01773f3ce57f..157ef6958e1f 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -126,3 +126,4 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx214.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx215.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-qrd.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts new file mode 100644 index 000000000000..7fe582b92a61 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts @@ -0,0 +1,634 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Konrad Dybcio + */ + +/dts-v1/; + +#include +#include "sm8450.dtsi" + +/delete-node/ &adsp_mem; +/delete-node/ &rmtfs_mem; +/delete-node/ &video_mem; + +/ { + model = "Sony Xperia 1 IV"; + compatible = "sony,pdx223", "qcom,sm8450"; + chassis-type = "handset"; + + aliases { + serial0 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + adsp_mem: memory@85700000 { + reg = <0x0 0x85700000 0x0 0x2800000>; + no-map; + }; + + video_mem: memory@9fd00000 { + reg = <0x0 0x9fd00000 0x0 0x700000>; + no-map; + }; + + rmtfs_mem: memory@f3300000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0xf3300000 0x0 0x280000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0 0xffc00000 0 0x200000>; + console-size = <0x40000>; + record-size = <0x1000>; + ecc-size = <16>; + no-map; + }; + }; + + /* Sadly, the voltages for these GPIO regulators are unknown. */ + imx650_vana_vreg: imx650-vana-regulator { + compatible = "regulator-fixed"; + regulator-name = "imx650_vana_vreg"; + gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + pm8350-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + + vdd-l1-l4-supply = <&pm8350_s11>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_bob>; + vdd-l6-l9-l10-supply = <&pm8350_s12>; + + /* + * ARC regulators: + * s5 - gfx.lvl + * l8 - lcx.lvl + */ + + pm8350_s10: smps10 { + regulator-name = "pm8350_s10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8350_s11: smps11 { + regulator-name = "pm8350_s11"; + regulator-min-microvolt = <848000>; + regulator-max-microvolt = <1104000>; + }; + + pm8350_s12: smps12 { + regulator-name = "pm8350_s12"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1400000>; + }; + + pm8350_l1: ldo1 { + regulator-name = "pm8350_l1"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + }; + + pm8350_l2: ldo2 { + regulator-name = "pm8350_l2"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + }; + + pm8350_l3: ldo3 { + regulator-name = "pm8350_l3"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = ; + }; + + pm8350_l5: ldo5 { + regulator-name = "pm8350_l5"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + pm8350_l6: ldo6 { + regulator-name = "pm8350_l6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + pm8350_l7: ldo7 { + regulator-name = "pm8350_l7"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = ; + }; + + pm8350_l9: ldo9 { + regulator-name = "pm8350_l9"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + }; + + pm8350c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&vreg_bob>; + vdd-l2-l8-supply = <&vreg_bob>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&pm8350_s12>; + + vdd-bob-supply = <&vph_pwr>; + + /* + * ARC regulators: + * s2 - mxc.lvl + * s4 - mss.lvl + * s6 - cx.lvl + */ + + pm8350c_s1: smps1 { + regulator-name = "pm8350c_s1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2024000>; + }; + + pm8350c_s10: smps10 { + regulator-name = "pm8350c_s10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3400000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + + pm8350c_l1: ldo1 { + regulator-name = "pm8350c_l1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + pm8350c_l2: ldo2 { + regulator-name = "pm8350c_l2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + pm8350c_l3: ldo3 { + regulator-name = "pm8350c_l3"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + pm8350c_l4: ldo4 { + regulator-name = "pm8350c_l4"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + pm8350c_l5: ldo5 { + regulator-name = "pm8350c_l5"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + pm8350c_l6: ldo6 { + regulator-name = "pm8350c_l6"; + regulator-min-microvolt = <2960000>; + /* Originally max = 3008000 but SDHCI expects 2960000 */ + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + pm8350c_l7: ldo7 { + regulator-name = "pm8350c_l7"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + pm8350c_l8: ldo8 { + regulator-name = "pm8350c_l8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + pm8350c_l9: ldo9 { + regulator-name = "pm8350c_l9"; + regulator-min-microvolt = <2960000>; + /* Originally max = 3008000 but SDHCI expects 2960000 */ + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + pm8350c_l10: ldo10 { + regulator-name = "pm8350c_l10"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + pm8350c_l12: ldo12 { + regulator-name = "pm8350c_l12"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1968000>; + regulator-initial-mode = ; + }; + + pm8350c_l13: ldo13 { + regulator-name = "pm8350c_l13"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + }; + + pm8450-rpmh-regulators { + compatible = "qcom,pm8450-rpmh-regulators"; + qcom,pmic-id = "h"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + vdd-l2-supply = <&vreg_bob>; + vdd-l3-supply = <&vreg_bob>; + vdd-l4-supply = <&vreg_bob>; + + /* + * ARC regulators: + * S2 - ebi.lvl + * S4 - mmcx.lvl + * S6 - mx.lvl + * L1 - lmx.lvl + */ + + pm8450_s3: smps3 { + regulator-name = "pm8450_s3"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <600000>; + }; + + pm8450_l2: ldo2 { + regulator-name = "pm8450_l2"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + + pm8450_l3: ldo3 { + regulator-name = "pm8450_l3"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + }; + }; + + pmr735a-rpmh-regulators { + compatible = "qcom,pmr735a-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + + vdd-l1-l2-supply = <&pmr735a_s2>; + vdd-l3-supply = <&pmr735a_s1>; + vdd-l4-supply = <&pm8350c_s1>; + vdd-l5-l6-supply = <&pm8350c_s1>; + vdd-l7-bob-supply = <&vreg_bob>; + + pmr735a_s1: smps1 { + regulator-name = "pmr735a_s1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1296000>; + }; + + pmr735a_s2: smps2 { + regulator-name = "pmr735a_s2"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1040000>; + }; + + pmr735a_s3: smps3 { + regulator-name = "pmr735a_s3"; + regulator-min-microvolt = <435000>; + regulator-max-microvolt = <2352000>; + }; + + pmr735a_l1: ldo1 { + regulator-name = "pmr735a_l1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + pmr735a_l2: ldo2 { + regulator-name = "pmr735a_l2"; + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <912000>; + }; + + pmr735a_l3: ldo3 { + regulator-name = "pmr735a_l3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pmr735a_l4: ldo4 { + regulator-name = "pmr735a_l4"; + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <1776000>; + }; + + pmr735a_l5: ldo5 { + regulator-name = "pmr735a_l5"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + + pmr735a_l6: ldo6 { + regulator-name = "pmr735a_l6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pmr735a_l7: ldo7 { + regulator-name = "pmr735a_l7"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpi_dma2 { + status = "okay"; +}; + +/* I2C4 is used, it hosts a Samsung touchscreen, but GPI DMA is broken.. */ + +&i2c5 { + clock-frequency = <400000>; + status = "okay"; + + /* Dialog SLG51000 CMIC @ 75 */ +}; + +&i2c9 { + clock-frequency = <400000>; + status = "okay"; + + /* NXP SN1X0 NFC @ 28 */ +}; + +&i2c13 { + clock-frequency = <400000>; + status = "okay"; + + /* Richwave RTC6226 FM Radio Receiver @ 64 */ +}; + +&i2c14 { + clock-frequency = <1000000>; + status = "okay"; + + cs35l41_l: speaker-amp@40 { + compatible = "cirrus,cs35l41"; + reg = <0x40>; + interrupt-parent = <&tlmm>; + interrupts = <182 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,gpio2-src-select = <2>; + cirrus,gpio2-output-enable; + cirrus,asp-sdout-hiz = <3>; + #sound-dai-cells = <1>; + }; + + cs35l41_r: speaker-amp@41 { + compatible = "cirrus,cs35l41"; + reg = <0x41>; + interrupt-parent = <&tlmm>; + interrupts = <182 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>; + cirrus,boost-peak-milliamp = <4000>; + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-cap-microfarad = <15>; + cirrus,gpio2-src-select = <2>; + cirrus,gpio2-output-enable; + cirrus,asp-sdout-hiz = <3>; + #sound-dai-cells = <1>; + }; +}; + +&i2c15 { + clock-frequency = <400000>; + status = "okay"; + + /* AMS TCS3490 RGB+IR color sensor @ 72 */ +}; + +&i2c19 { + clock-frequency = <1000000>; + status = "okay"; + + /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */ +}; + +&pcie0 { + max-link-speed = <2>; + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&pm8350_l5>; + vdda-pll-supply = <&pm8350_l6>; + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/cdsp.mbn"; + status = "okay"; +}; + +&remoteproc_slpi { + firmware-name = "qcom/slpi.mbn"; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>; + vmmc-supply = <&pm8350c_l9>; + vqmmc-supply = <&pm8350c_l6>; + /* Forbid SDR104/SDR50 - broken hw! */ + sdhci-caps-mask = <0x3 0x0>; + no-sdio; + no-mmc; + status = "okay"; +}; + +&spi10 { + status = "okay"; + + /* NXP SN1X0 NFC Secure Element @ 0 */ +}; + +&tlmm { + gpio-reserved-ranges = <28 4>; + + sdc2_default_state: sdc2-default { + clk { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd { + pins = "sdc2_cmd"; + drive-strength = <16>; + bias-pull-up; + }; + + data { + pins = "sdc2_data"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + ts_int_default: ts-int-default { + pins = "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + + sdc2_card_det_n: sd-card-det-n { + pins = "gpio92"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&uart7 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&pm8350_l5>; + vdda18-supply = <&pm8350c_l1>; + vdda33-supply = <&pm8350_l2>; + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&pm8350_l6>; + vdda-pll-supply = <&pm8350_l1>; + status = "okay"; +};