From patchwork Tue Jun 7 21:31:50 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Baryshkov X-Patchwork-Id: 579913 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 94686C433EF for ; Wed, 8 Jun 2022 03:12:55 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234027AbiFHDMv (ORCPT ); Tue, 7 Jun 2022 23:12:51 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:55494 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S238992AbiFHDLv (ORCPT ); Tue, 7 Jun 2022 23:11:51 -0400 Received: from mail-lf1-x136.google.com (mail-lf1-x136.google.com [IPv6:2a00:1450:4864:20::136]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 0B47522CECA for ; Tue, 7 Jun 2022 14:32:30 -0700 (PDT) Received: by mail-lf1-x136.google.com with SMTP id w20so8626517lfa.11 for ; Tue, 07 Jun 2022 14:32:30 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=Uv8fCJ2lMkxd/vYi4XRfq/grsPGO3XaS9NGpJZg3Axs=; b=kjnO8vbfkbBasfkjaM7yaYM/f6JCZeDPrwz6KDZXM3pho7I2WwLemSWT1/hmFFlYUw OybpqruKbh9z/qQ8qlt0ZN5r2y06D4gKpFs3utEtzGvNm0GHT0tmVSd2OW2b4XzCVMlt mFFmu87mrGUlGaIPel7D+c4YOv0X59xdJCdfvjCyQxNbpB2cPnBsdjX6LGCdK3L/53bU E82mbCicXL+8byrf3boEUTGC8+gs32ehfoAW88tlyrCLtgS59dQMdcPconcbTotMvSX6 VdMujbq+MBT5pSLsfF1Xn+wf3cHbFSs6KIRUJbl1GHf2L/Y/G3gZfSnllYdSEOYw7Ka7 zvTA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=Uv8fCJ2lMkxd/vYi4XRfq/grsPGO3XaS9NGpJZg3Axs=; b=SRWvgyX8sbV1FtJ0DXkAtgGXKhQ3RZCfbVzcDwmOojZPR1WxoHQe9FQJsoHaVvcLs9 H+hYV7eAdnJlQgKEyODc6/swz7nPpCDtxeEKwdWC/BlzwLuLiNF2ViaNWLUiflQuA/LA 7dOJZiMYL6ro5oE65x42LVl5yI/hDl2SmAx2JJmiF6iawJkRIpgL3dz9QQb2FcJLrerm uKSoOcsHyIEOiiAuHlD5jfFU5I5Kmts7FELKubgbBmgcQ4bBvEKxvUUQ3oGhoBUcOir7 sBVbQIduZYpyM0Z2N6l/iCa26knofBqIn9QKv26Oise6Ky44Ug8TH4sm4YzxryOJFAnE GJNw== X-Gm-Message-State: AOAM531ZtR3x8ivi11OiIN8BBNTrT+lLFvgfRXTSMObV4QocfS2dHRPT 4ZsYVqKGy789tsjV2qXYTsgiSg== X-Google-Smtp-Source: ABdhPJyo2ein0pnGFDiIKxr+pdlsnAnX+m6cL41PCtD4eQXnt0Xe2D0GSjU0KA9HrYFFMLgapGqaPQ== X-Received: by 2002:a05:6512:20a:b0:479:8fb:2214 with SMTP id a10-20020a056512020a00b0047908fb2214mr21138768lfo.473.1654637550301; Tue, 07 Jun 2022 14:32:30 -0700 (PDT) Received: from eriador.lan ([37.153.55.125]) by smtp.gmail.com with ESMTPSA id g23-20020ac24d97000000b0047255d21153sm3411343lfe.130.2022.06.07.14.32.29 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 07 Jun 2022 14:32:29 -0700 (PDT) From: Dmitry Baryshkov To: Andy Gross , Bjorn Andersson , Vinod Koul , Kishon Vijay Abraham I Cc: Philipp Zabel , linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org Subject: [PATCH v1 17/30] phy: qcom-qmp-ufs: drop support for non-UFS PHY types Date: Wed, 8 Jun 2022 00:31:50 +0300 Message-Id: <20220607213203.2819885-18-dmitry.baryshkov@linaro.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220607213203.2819885-1-dmitry.baryshkov@linaro.org> References: <20220607213203.2819885-1-dmitry.baryshkov@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Drop remaining support for PHY types other than UFS. Acked-by: Bjorn Andersson Tested-by: Bjorn Andersson # UFS, PCIe and USB on SC8180X Signed-off-by: Dmitry Baryshkov --- drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 612 ++---------------------- 1 file changed, 35 insertions(+), 577 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c index a8d48c70532c..0bf1990651b6 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c @@ -986,7 +986,6 @@ static int qcom_qmp_phy_ufs_serdes_init(struct qmp_phy *qphy) struct qcom_qmp *qmp = qphy->qmp; const struct qmp_phy_cfg *cfg = qphy->cfg; void __iomem *serdes = qphy->serdes; - const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts; const struct qmp_phy_init_tbl *serdes_tbl = cfg->serdes_tbl; int serdes_tbl_num = cfg->serdes_tbl_num; int ret; @@ -996,35 +995,6 @@ static int qcom_qmp_phy_ufs_serdes_init(struct qmp_phy *qphy) qcom_qmp_phy_ufs_configure(serdes, cfg->regs, cfg->serdes_tbl_sec, cfg->serdes_tbl_num_sec); - if (cfg->type == PHY_TYPE_DP) { - switch (dp_opts->link_rate) { - case 1620: - qcom_qmp_phy_ufs_configure(serdes, cfg->regs, - cfg->serdes_tbl_rbr, - cfg->serdes_tbl_rbr_num); - break; - case 2700: - qcom_qmp_phy_ufs_configure(serdes, cfg->regs, - cfg->serdes_tbl_hbr, - cfg->serdes_tbl_hbr_num); - break; - case 5400: - qcom_qmp_phy_ufs_configure(serdes, cfg->regs, - cfg->serdes_tbl_hbr2, - cfg->serdes_tbl_hbr2_num); - break; - case 8100: - qcom_qmp_phy_ufs_configure(serdes, cfg->regs, - cfg->serdes_tbl_hbr3, - cfg->serdes_tbl_hbr3_num); - break; - default: - /* Other link rates aren't supported */ - return -EINVAL; - } - } - - if (cfg->has_phy_com_ctrl) { void __iomem *status; unsigned int mask, val; @@ -1048,32 +1018,6 @@ static int qcom_qmp_phy_ufs_serdes_init(struct qmp_phy *qphy) return 0; } -static int qcom_qmp_dp_phy_configure(struct phy *phy, union phy_configure_opts *opts) -{ - const struct phy_configure_opts_dp *dp_opts = &opts->dp; - struct qmp_phy *qphy = phy_get_drvdata(phy); - const struct qmp_phy_cfg *cfg = qphy->cfg; - - memcpy(&qphy->dp_opts, dp_opts, sizeof(*dp_opts)); - if (qphy->dp_opts.set_voltages) { - cfg->configure_dp_tx(qphy); - qphy->dp_opts.set_voltages = 0; - } - - return 0; -} - -static int qcom_qmp_dp_phy_calibrate(struct phy *phy) -{ - struct qmp_phy *qphy = phy_get_drvdata(phy); - const struct qmp_phy_cfg *cfg = qphy->cfg; - - if (cfg->calibrate_dp_phy) - return cfg->calibrate_dp_phy(qphy); - - return 0; -} - static int qcom_qmp_phy_ufs_com_init(struct qmp_phy *qphy) { struct qcom_qmp *qmp = qphy->qmp; @@ -1243,9 +1187,6 @@ static int qcom_qmp_phy_ufs_init(struct phy *phy) if (ret) return ret; - if (cfg->type == PHY_TYPE_DP) - cfg->dp_aux_init(qphy); - return 0; } @@ -1296,10 +1237,6 @@ static int qcom_qmp_phy_ufs_power_on(struct phy *phy) cfg->tx_tbl_num_sec, 2); } - /* Configure special DP tx tunings */ - if (cfg->type == PHY_TYPE_DP) - cfg->configure_dp_tx(qphy); - qcom_qmp_phy_ufs_configure_lane(rx, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num, 1); if (cfg->rx_tbl_sec) @@ -1315,15 +1252,10 @@ static int qcom_qmp_phy_ufs_power_on(struct phy *phy) cfg->rx_tbl_num_sec, 2); } - /* Configure link rate, swing, etc. */ - if (cfg->type == PHY_TYPE_DP) { - cfg->configure_dp_phy(qphy); - } else { - qcom_qmp_phy_ufs_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num); - if (cfg->pcs_tbl_sec) - qcom_qmp_phy_ufs_configure(pcs, cfg->regs, cfg->pcs_tbl_sec, - cfg->pcs_tbl_num_sec); - } + qcom_qmp_phy_ufs_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num); + if (cfg->pcs_tbl_sec) + qcom_qmp_phy_ufs_configure(pcs, cfg->regs, cfg->pcs_tbl_sec, + cfg->pcs_tbl_num_sec); ret = reset_control_deassert(qmp->ufs_reset); if (ret) @@ -1335,39 +1267,24 @@ static int qcom_qmp_phy_ufs_power_on(struct phy *phy) qcom_qmp_phy_ufs_configure(pcs_misc, cfg->regs, cfg->pcs_misc_tbl_sec, cfg->pcs_misc_tbl_num_sec); - /* - * Pull out PHY from POWER DOWN state. - * This is active low enable signal to power-down PHY. - */ - if(cfg->type == PHY_TYPE_PCIE) - qphy_setbits(pcs, QPHY_POWER_DOWN_CONTROL, cfg->pwrdn_ctrl); - if (cfg->has_pwrdn_delay) usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max); - if (cfg->type != PHY_TYPE_DP) { - /* Pull PHY out of reset state */ - if (!cfg->no_pcs_sw_reset) - qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); - /* start SerDes and Phy-Coding-Sublayer */ - qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); - - if (cfg->type == PHY_TYPE_UFS) { - status = pcs + cfg->regs[QPHY_PCS_READY_STATUS]; - mask = PCS_READY; - ready = PCS_READY; - } else { - status = pcs + cfg->regs[QPHY_PCS_STATUS]; - mask = cfg->phy_status; - ready = 0; - } + /* Pull PHY out of reset state */ + if (!cfg->no_pcs_sw_reset) + qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); + /* start SerDes and Phy-Coding-Sublayer */ + qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); - ret = readl_poll_timeout(status, val, (val & mask) == ready, 10, - PHY_INIT_COMPLETE_TIMEOUT); - if (ret) { - dev_err(qmp->dev, "phy initialization timed-out\n"); - goto err_disable_pipe_clk; - } + status = pcs + cfg->regs[QPHY_PCS_READY_STATUS]; + mask = PCS_READY; + ready = PCS_READY; + + ret = readl_poll_timeout(status, val, (val & mask) == ready, 10, + PHY_INIT_COMPLETE_TIMEOUT); + if (ret) { + dev_err(qmp->dev, "phy initialization timed-out\n"); + goto err_disable_pipe_clk; } return 0; @@ -1387,25 +1304,20 @@ static int qcom_qmp_phy_ufs_power_off(struct phy *phy) clk_disable_unprepare(qphy->pipe_clk); - if (cfg->type == PHY_TYPE_DP) { - /* Assert DP PHY power down */ - writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_DP_PHY_PD_CTL); - } else { - /* PHY reset */ - if (!cfg->no_pcs_sw_reset) - qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); + /* PHY reset */ + if (!cfg->no_pcs_sw_reset) + qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); - /* stop SerDes and Phy-Coding-Sublayer */ - qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); + /* stop SerDes and Phy-Coding-Sublayer */ + qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); - /* Put PHY into POWER DOWN state: active low */ - if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL]) { - qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], - cfg->pwrdn_ctrl); - } else { - qphy_clrbits(qphy->pcs, QPHY_POWER_DOWN_CONTROL, - cfg->pwrdn_ctrl); - } + /* Put PHY into POWER DOWN state: active low */ + if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL]) { + qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], + cfg->pwrdn_ctrl); + } else { + qphy_clrbits(qphy->pcs, QPHY_POWER_DOWN_CONTROL, + cfg->pwrdn_ctrl); } return 0; @@ -1459,112 +1371,6 @@ static int qcom_qmp_phy_ufs_set_mode(struct phy *phy, return 0; } -static void qcom_qmp_phy_ufs_enable_autonomous_mode(struct qmp_phy *qphy) -{ - const struct qmp_phy_cfg *cfg = qphy->cfg; - void __iomem *pcs = qphy->pcs; - void __iomem *pcs_misc = qphy->pcs_misc; - u32 intr_mask; - - if (qphy->mode == PHY_MODE_USB_HOST_SS || - qphy->mode == PHY_MODE_USB_DEVICE_SS) - intr_mask = ARCVR_DTCT_EN | ALFPS_DTCT_EN; - else - intr_mask = ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL; - - /* Clear any pending interrupts status */ - qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR); - /* Writing 1 followed by 0 clears the interrupt */ - qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR); - - qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], - ARCVR_DTCT_EN | ALFPS_DTCT_EN | ARCVR_DTCT_EVENT_SEL); - - /* Enable required PHY autonomous mode interrupts */ - qphy_setbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], intr_mask); - - /* Enable i/o clamp_n for autonomous mode */ - if (pcs_misc) - qphy_clrbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN); -} - -static void qcom_qmp_phy_ufs_disable_autonomous_mode(struct qmp_phy *qphy) -{ - const struct qmp_phy_cfg *cfg = qphy->cfg; - void __iomem *pcs = qphy->pcs; - void __iomem *pcs_misc = qphy->pcs_misc; - - /* Disable i/o clamp_n on resume for normal mode */ - if (pcs_misc) - qphy_setbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN); - - qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], - ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL | ALFPS_DTCT_EN); - - qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR); - /* Writing 1 followed by 0 clears the interrupt */ - qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR); -} - -static int __maybe_unused qcom_qmp_phy_ufs_runtime_suspend(struct device *dev) -{ - struct qcom_qmp *qmp = dev_get_drvdata(dev); - struct qmp_phy *qphy = qmp->phys[0]; - const struct qmp_phy_cfg *cfg = qphy->cfg; - - dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qphy->mode); - - /* Supported only for USB3 PHY and luckily USB3 is the first phy */ - if (cfg->type != PHY_TYPE_USB3) - return 0; - - if (!qmp->init_count) { - dev_vdbg(dev, "PHY not initialized, bailing out\n"); - return 0; - } - - qcom_qmp_phy_ufs_enable_autonomous_mode(qphy); - - clk_disable_unprepare(qphy->pipe_clk); - clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks); - - return 0; -} - -static int __maybe_unused qcom_qmp_phy_ufs_runtime_resume(struct device *dev) -{ - struct qcom_qmp *qmp = dev_get_drvdata(dev); - struct qmp_phy *qphy = qmp->phys[0]; - const struct qmp_phy_cfg *cfg = qphy->cfg; - int ret = 0; - - dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qphy->mode); - - /* Supported only for USB3 PHY and luckily USB3 is the first phy */ - if (cfg->type != PHY_TYPE_USB3) - return 0; - - if (!qmp->init_count) { - dev_vdbg(dev, "PHY not initialized, bailing out\n"); - return 0; - } - - ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks); - if (ret) - return ret; - - ret = clk_prepare_enable(qphy->pipe_clk); - if (ret) { - dev_err(dev, "pipe_clk enable failed, err=%d\n", ret); - clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks); - return ret; - } - - qcom_qmp_phy_ufs_disable_autonomous_mode(qphy); - - return 0; -} - static int qcom_qmp_phy_ufs_vreg_init(struct device *dev, const struct qmp_phy_cfg *cfg) { struct qcom_qmp *qmp = dev_get_drvdata(dev); @@ -1622,277 +1428,7 @@ static int qcom_qmp_phy_ufs_clk_init(struct device *dev, const struct qmp_phy_cf return devm_clk_bulk_get(dev, num, qmp->clks); } -static void phy_clk_release_provider(void *res) -{ - of_clk_del_provider(res); -} - -/* - * Register a fixed rate pipe clock. - * - * The _pipe_clksrc generated by PHY goes to the GCC that gate - * controls it. The _pipe_clk coming out of the GCC is requested - * by the PHY driver for its operations. - * We register the _pipe_clksrc here. The gcc driver takes care - * of assigning this _pipe_clksrc as parent to _pipe_clk. - * Below picture shows this relationship. - * - * +---------------+ - * | PHY block |<<---------------------------------------+ - * | | | - * | +-------+ | +-----+ | - * I/P---^-->| PLL |---^--->pipe_clksrc--->| GCC |--->pipe_clk---+ - * clk | +-------+ | +-----+ - * +---------------+ - */ -static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np) -{ - struct clk_fixed_rate *fixed; - struct clk_init_data init = { }; - int ret; - - ret = of_property_read_string(np, "clock-output-names", &init.name); - if (ret) { - dev_err(qmp->dev, "%pOFn: No clock-output-names\n", np); - return ret; - } - - fixed = devm_kzalloc(qmp->dev, sizeof(*fixed), GFP_KERNEL); - if (!fixed) - return -ENOMEM; - - init.ops = &clk_fixed_rate_ops; - - /* controllers using QMP phys use 125MHz pipe clock interface */ - fixed->fixed_rate = 125000000; - fixed->hw.init = &init; - - ret = devm_clk_hw_register(qmp->dev, &fixed->hw); - if (ret) - return ret; - - ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, &fixed->hw); - if (ret) - return ret; - - /* - * Roll a devm action because the clock provider is the child node, but - * the child node is not actually a device. - */ - return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np); -} - -/* - * Display Port PLL driver block diagram for branch clocks - * - * +------------------------------+ - * | DP_VCO_CLK | - * | | - * | +-------------------+ | - * | | (DP PLL/VCO) | | - * | +---------+---------+ | - * | v | - * | +----------+-----------+ | - * | | hsclk_divsel_clk_src | | - * | +----------+-----------+ | - * +------------------------------+ - * | - * +---------<---------v------------>----------+ - * | | - * +--------v----------------+ | - * | dp_phy_pll_link_clk | | - * | link_clk | | - * +--------+----------------+ | - * | | - * | | - * v v - * Input to DISPCC block | - * for link clk, crypto clk | - * and interface clock | - * | - * | - * +--------<------------+-----------------+---<---+ - * | | | - * +----v---------+ +--------v-----+ +--------v------+ - * | vco_divided | | vco_divided | | vco_divided | - * | _clk_src | | _clk_src | | _clk_src | - * | | | | | | - * |divsel_six | | divsel_two | | divsel_four | - * +-------+------+ +-----+--------+ +--------+------+ - * | | | - * v---->----------v-------------<------v - * | - * +----------+-----------------+ - * | dp_phy_pll_vco_div_clk | - * +---------+------------------+ - * | - * v - * Input to DISPCC block - * for DP pixel clock - * - */ -static int qcom_qmp_dp_pixel_clk_determine_rate(struct clk_hw *hw, - struct clk_rate_request *req) -{ - switch (req->rate) { - case 1620000000UL / 2: - case 2700000000UL / 2: - /* 5.4 and 8.1 GHz are same link rate as 2.7GHz, i.e. div 4 and div 6 */ - return 0; - default: - return -EINVAL; - } -} - -static unsigned long -qcom_qmp_dp_pixel_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) -{ - const struct qmp_phy_dp_clks *dp_clks; - const struct qmp_phy *qphy; - const struct phy_configure_opts_dp *dp_opts; - - dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_pixel_hw); - qphy = dp_clks->qphy; - dp_opts = &qphy->dp_opts; - - switch (dp_opts->link_rate) { - case 1620: - return 1620000000UL / 2; - case 2700: - return 2700000000UL / 2; - case 5400: - return 5400000000UL / 4; - case 8100: - return 8100000000UL / 6; - default: - return 0; - } -} - -static const struct clk_ops qcom_qmp_dp_pixel_clk_ops = { - .determine_rate = qcom_qmp_dp_pixel_clk_determine_rate, - .recalc_rate = qcom_qmp_dp_pixel_clk_recalc_rate, -}; - -static int qcom_qmp_dp_link_clk_determine_rate(struct clk_hw *hw, - struct clk_rate_request *req) -{ - switch (req->rate) { - case 162000000: - case 270000000: - case 540000000: - case 810000000: - return 0; - default: - return -EINVAL; - } -} - -static unsigned long -qcom_qmp_dp_link_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) -{ - const struct qmp_phy_dp_clks *dp_clks; - const struct qmp_phy *qphy; - const struct phy_configure_opts_dp *dp_opts; - - dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_link_hw); - qphy = dp_clks->qphy; - dp_opts = &qphy->dp_opts; - - switch (dp_opts->link_rate) { - case 1620: - case 2700: - case 5400: - case 8100: - return dp_opts->link_rate * 100000; - default: - return 0; - } -} - -static const struct clk_ops qcom_qmp_dp_link_clk_ops = { - .determine_rate = qcom_qmp_dp_link_clk_determine_rate, - .recalc_rate = qcom_qmp_dp_link_clk_recalc_rate, -}; - -static struct clk_hw * -qcom_qmp_dp_clks_hw_get(struct of_phandle_args *clkspec, void *data) -{ - struct qmp_phy_dp_clks *dp_clks = data; - unsigned int idx = clkspec->args[0]; - - if (idx >= 2) { - pr_err("%s: invalid index %u\n", __func__, idx); - return ERR_PTR(-EINVAL); - } - - if (idx == 0) - return &dp_clks->dp_link_hw; - - return &dp_clks->dp_pixel_hw; -} - -static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy, - struct device_node *np) -{ - struct clk_init_data init = { }; - struct qmp_phy_dp_clks *dp_clks; - char name[64]; - int ret; - - dp_clks = devm_kzalloc(qmp->dev, sizeof(*dp_clks), GFP_KERNEL); - if (!dp_clks) - return -ENOMEM; - - dp_clks->qphy = qphy; - qphy->dp_clks = dp_clks; - - snprintf(name, sizeof(name), "%s::link_clk", dev_name(qmp->dev)); - init.ops = &qcom_qmp_dp_link_clk_ops; - init.name = name; - dp_clks->dp_link_hw.init = &init; - ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_link_hw); - if (ret) - return ret; - - snprintf(name, sizeof(name), "%s::vco_div_clk", dev_name(qmp->dev)); - init.ops = &qcom_qmp_dp_pixel_clk_ops; - init.name = name; - dp_clks->dp_pixel_hw.init = &init; - ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_pixel_hw); - if (ret) - return ret; - - ret = of_clk_add_hw_provider(np, qcom_qmp_dp_clks_hw_get, dp_clks); - if (ret) - return ret; - - /* - * Roll a devm action because the clock provider is the child node, but - * the child node is not actually a device. - */ - return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, np); -} - -static const struct phy_ops qcom_qmp_phy_ufs_gen_ops = { - .init = qcom_qmp_phy_ufs_enable, - .exit = qcom_qmp_phy_ufs_disable, - .set_mode = qcom_qmp_phy_ufs_set_mode, - .owner = THIS_MODULE, -}; - -static const struct phy_ops qcom_qmp_phy_ufs_dp_ops = { - .init = qcom_qmp_phy_ufs_init, - .configure = qcom_qmp_dp_phy_configure, - .power_on = qcom_qmp_phy_ufs_power_on, - .calibrate = qcom_qmp_dp_phy_calibrate, - .power_off = qcom_qmp_phy_ufs_power_off, - .exit = qcom_qmp_phy_ufs_exit, - .set_mode = qcom_qmp_phy_ufs_set_mode, - .owner = THIS_MODULE, -}; - -static const struct phy_ops qcom_qmp_pcie_ufs_ops = { +static const struct phy_ops qcom_qmp_ufs_ops = { .power_on = qcom_qmp_phy_ufs_enable, .power_off = qcom_qmp_phy_ufs_disable, .set_mode = qcom_qmp_phy_ufs_set_mode, @@ -1911,7 +1447,6 @@ int qcom_qmp_phy_ufs_create(struct device *dev, struct device_node *np, int id, struct qcom_qmp *qmp = dev_get_drvdata(dev); struct phy *generic_phy; struct qmp_phy *qphy; - const struct phy_ops *ops; char prop_name[MAX_PROP_NAME]; int ret; @@ -1968,28 +1503,6 @@ int qcom_qmp_phy_ufs_create(struct device *dev, struct device_node *np, int id, if (!qphy->pcs_misc) dev_vdbg(dev, "PHY pcs_misc-reg not used\n"); - /* - * Get PHY's Pipe clock, if any. USB3 and PCIe are PIPE3 - * based phys, so they essentially have pipe clock. So, - * we return error in case phy is USB3 or PIPE type. - * Otherwise, we initialize pipe clock to NULL for - * all phys that don't need this. - */ - snprintf(prop_name, sizeof(prop_name), "pipe%d", id); - qphy->pipe_clk = devm_get_clk_from_child(dev, np, prop_name); - if (IS_ERR(qphy->pipe_clk)) { - if (cfg->type == PHY_TYPE_PCIE || - cfg->type == PHY_TYPE_USB3) { - ret = PTR_ERR(qphy->pipe_clk); - if (ret != -EPROBE_DEFER) - dev_err(dev, - "failed to get lane%d pipe_clk, %d\n", - id, ret); - return ret; - } - qphy->pipe_clk = NULL; - } - /* Get lane reset, if any */ if (cfg->has_lane_rst) { snprintf(prop_name, sizeof(prop_name), "lane%d", id); @@ -2004,14 +1517,7 @@ int qcom_qmp_phy_ufs_create(struct device *dev, struct device_node *np, int id, return ret; } - if (cfg->type == PHY_TYPE_UFS || cfg->type == PHY_TYPE_PCIE) - ops = &qcom_qmp_pcie_ufs_ops; - else if (cfg->type == PHY_TYPE_DP) - ops = &qcom_qmp_phy_ufs_dp_ops; - else - ops = &qcom_qmp_phy_ufs_gen_ops; - - generic_phy = devm_phy_create(dev, np, ops); + generic_phy = devm_phy_create(dev, np, &qcom_qmp_ufs_ops); if (IS_ERR(generic_phy)) { ret = PTR_ERR(generic_phy); dev_err(dev, "failed to create qphy %d\n", ret); @@ -2066,11 +1572,6 @@ static const struct of_device_id qcom_qmp_phy_ufs_of_match_table[] = { }; MODULE_DEVICE_TABLE(of, qcom_qmp_phy_ufs_of_match_table); -static const struct dev_pm_ops qcom_qmp_phy_ufs_pm_ops = { - SET_RUNTIME_PM_OPS(qcom_qmp_phy_ufs_runtime_suspend, - qcom_qmp_phy_ufs_runtime_resume, NULL) -}; - static int qcom_qmp_phy_ufs_probe(struct platform_device *pdev) { struct qcom_qmp *qmp; @@ -2078,12 +1579,7 @@ static int qcom_qmp_phy_ufs_probe(struct platform_device *pdev) struct device_node *child; struct phy_provider *phy_provider; void __iomem *serdes; - void __iomem *usb_serdes; - void __iomem *dp_serdes = NULL; - const struct qmp_phy_combo_cfg *combo_cfg = NULL; const struct qmp_phy_cfg *cfg = NULL; - const struct qmp_phy_cfg *usb_cfg = NULL; - const struct qmp_phy_cfg *dp_cfg = NULL; int num, id, expected_phys; int ret; @@ -2100,28 +1596,18 @@ static int qcom_qmp_phy_ufs_probe(struct platform_device *pdev) return -EINVAL; /* per PHY serdes; usually located at base address */ - usb_serdes = serdes = devm_platform_ioremap_resource(pdev, 0); + serdes = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(serdes)) return PTR_ERR(serdes); /* per PHY dp_com; if PHY has dp_com control block */ - if (combo_cfg || cfg->has_phy_dp_com_ctrl) { + if (cfg->has_phy_dp_com_ctrl) { qmp->dp_com = devm_platform_ioremap_resource(pdev, 1); if (IS_ERR(qmp->dp_com)) return PTR_ERR(qmp->dp_com); } - if (combo_cfg) { - /* Only two serdes for combo PHY */ - dp_serdes = devm_platform_ioremap_resource(pdev, 2); - if (IS_ERR(dp_serdes)) - return PTR_ERR(dp_serdes); - - dp_cfg = combo_cfg->dp_cfg; - expected_phys = 2; - } else { - expected_phys = cfg->nlanes; - } + expected_phys = cfg->nlanes; mutex_init(&qmp->phy_mutex); @@ -2160,14 +1646,6 @@ static int qcom_qmp_phy_ufs_probe(struct platform_device *pdev) id = 0; for_each_available_child_of_node(dev->of_node, child) { - if (of_node_name_eq(child, "dp-phy")) { - cfg = dp_cfg; - serdes = dp_serdes; - } else if (of_node_name_eq(child, "usb3-phy")) { - cfg = usb_cfg; - serdes = usb_serdes; - } - /* Create per-lane phy */ ret = qcom_qmp_phy_ufs_create(dev, child, id, serdes, cfg); if (ret) { @@ -2176,25 +1654,6 @@ static int qcom_qmp_phy_ufs_probe(struct platform_device *pdev) goto err_node_put; } - /* - * Register the pipe clock provided by phy. - * See function description to see details of this pipe clock. - */ - if (cfg->type == PHY_TYPE_USB3 || cfg->type == PHY_TYPE_PCIE) { - ret = phy_pipe_clk_register(qmp, child); - if (ret) { - dev_err(qmp->dev, - "failed to register pipe clock source\n"); - goto err_node_put; - } - } else if (cfg->type == PHY_TYPE_DP) { - ret = phy_dp_clks_register(qmp, qmp->phys[id], child); - if (ret) { - dev_err(qmp->dev, - "failed to register DP clock source\n"); - goto err_node_put; - } - } id++; } @@ -2216,7 +1675,6 @@ static struct platform_driver qcom_qmp_phy_ufs_driver = { .probe = qcom_qmp_phy_ufs_probe, .driver = { .name = "qcom-qmp-ufs-phy", - .pm = &qcom_qmp_phy_ufs_pm_ops, .of_match_table = qcom_qmp_phy_ufs_of_match_table, }, };