@@ -364,24 +364,19 @@ static struct hdmi_platform_config hdmi_tx_8960_config = {
};
static const char *pwr_reg_names_8x74[] = {"core-vdda", "core-vcc"};
-static const char *hpd_reg_names_8x74[] = {"hpd-gdsc", "hpd-5v"};
static const char *pwr_clk_names_8x74[] = {"extp", "alt_iface"};
static const char *hpd_clk_names_8x74[] = {"iface", "core", "mdp_core"};
static unsigned long hpd_clk_freq_8x74[] = {0, 19200000, 0};
static struct hdmi_platform_config hdmi_tx_8974_config = {
HDMI_CFG(pwr_reg, 8x74),
- HDMI_CFG(hpd_reg, 8x74),
HDMI_CFG(pwr_clk, 8x74),
HDMI_CFG(hpd_clk, 8x74),
.hpd_freq = hpd_clk_freq_8x74,
};
-static const char *hpd_reg_names_8084[] = {"hpd-gdsc", "hpd-5v", "hpd-5v-en"};
-
static struct hdmi_platform_config hdmi_tx_8084_config = {
HDMI_CFG(pwr_reg, 8x74),
- HDMI_CFG(hpd_reg, 8084),
HDMI_CFG(pwr_clk, 8x74),
HDMI_CFG(hpd_clk, 8x74),
.hpd_freq = hpd_clk_freq_8x74,
The MSM HDMI driver has support for hpd_regs on 8x74/8084: supply regulators that are to be enabled for HPD to work. Currently these regulators contain the hpd_gdsc, which was replaced by the power-domains support and hpd-5v/hpd-5v-en, which are not used by the chip itself. They power up the ESD bridge. However it is a separate device which should be represented separately in the device tree. None of upstreamed devices support these properties. Thus drop support for them from the HDMI driver. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/gpu/drm/msm/hdmi/hdmi.c | 5 ----- 1 file changed, 5 deletions(-)