@@ -88,7 +88,7 @@ &hsusb_phy1 {
status = "okay";
};
-&sdc2_state_off {
+&sdc2_off_state {
sd-cd {
pins = "gpio98";
drive-strength = <2>;
@@ -96,7 +96,7 @@ sd-cd {
};
};
-&sdc2_state_on {
+&sdc2_on_state {
sd-cd {
pins = "gpio98";
drive-strength = <2>;
@@ -386,7 +386,7 @@ tlmm: pinctrl@500000 {
interrupt-controller;
#interrupt-cells = <2>;
- sdc2_state_off: sdc2-off {
+ sdc2_off_state: sdc2-off-state {
clk {
pins = "sdc2_clk";
drive-strength = <2>;
@@ -406,7 +406,7 @@ data {
};
};
- sdc2_state_on: sdc2-on {
+ sdc2_on_state: sdc2-on-state {
clk {
pins = "sdc2_clk";
drive-strength = <16>;
@@ -490,8 +490,8 @@ sdhc_2: sdhci@4784000 {
<&xo_board>;
clock-names = "iface", "core", "xo";
- pinctrl-0 = <&sdc2_state_on>;
- pinctrl-1 = <&sdc2_state_off>;
+ pinctrl-0 = <&sdc2_on_state>;
+ pinctrl-1 = <&sdc2_off_state>;
pinctrl-names = "default", "sleep";
power-domains = <&rpmpd SM6125_VDDCX>;
According to qcom,sm6125-pinctrl.yaml all nodes inside the tlmm must be suffixed by -state: qcom/sm6125-sony-xperia-seine-pdx201.dtb: pinctrl@500000: 'sdc2-off', 'sdc2-on' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+' The label names have been updated to match, going from sdc2_state_X to sdc2_X_state. Fixes: cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125") Fixes: 82e1783890b7 ("arm64: dts: qcom: sm6125: Add support for Sony Xperia 10II") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> --- .../boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts | 4 ++-- arch/arm64/boot/dts/qcom/sm6125.dtsi | 8 ++++---- 2 files changed, 6 insertions(+), 6 deletions(-)