@@ -26,9 +26,6 @@ &blsp2_i2c5 {
status = "okay";
clock-frequency = <200000>;
- pinctrl-0 = <&i2c11_pins>;
- pinctrl-names = "default";
-
eeprom: eeprom@52 {
compatible = "atmel,24c128";
reg = <0x52>;
@@ -256,48 +253,25 @@ &sdhc_1 {
vmmc-supply = <&pm8941_l20>;
vqmmc-supply = <&pm8941_s3>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc1_pin_a>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_on>;
+ pinctrl-1 = <&sdc1_off>;
};
&sdhc_2 {
status = "okay";
- cd-gpios = <&tlmm 62 0x1>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
+ cd-gpios = <&tlmm 62 0x1>;
vmmc-supply = <&pm8941_l21>;
vqmmc-supply = <&pm8941_l13>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_on>;
+ pinctrl-1 = <&sdc2_off>;
};
&tlmm {
- i2c11_pins: i2c11 {
- mux {
- pins = "gpio83", "gpio84";
- function = "blsp_i2c11";
- };
- };
-
- spi8_default: spi8_default {
- mosi {
- pins = "gpio45";
- function = "blsp_spi8";
- };
- miso {
- pins = "gpio46";
- function = "blsp_spi8";
- };
- cs {
- pins = "gpio47";
- function = "blsp_spi8";
- };
- clk {
- pins = "gpio48";
- function = "blsp_spi8";
- };
- };
-
- sdhc1_pin_a: sdhc1-pin-active {
+ sdc1_on: sdc1-on {
clk {
pins = "sdc1_clk";
drive-strength = <16>;
@@ -311,15 +285,7 @@ cmd-data {
};
};
- sdhc2_cd_pin_a: sdhc2-cd-pin-active {
- pins = "gpio62";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- };
-
- sdhc2_pin_a: sdhc2-pin-active {
+ sdc2_on: sdc2-on {
clk {
pins = "sdc2_clk";
drive-strength = <10>;
@@ -331,5 +297,12 @@ cmd-data {
drive-strength = <6>;
bias-pull-up;
};
+
+ cd {
+ pins = "gpio62";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
};
};
@@ -321,8 +321,9 @@ &sdhc_1 {
vmmc-supply = <&pm8941_l20>;
vqmmc-supply = <&pm8941_s3>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc1_pin_a>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_on>;
+ pinctrl-1 = <&sdc1_off>;
};
&sdhc_2 {
@@ -331,12 +332,13 @@ &sdhc_2 {
vmmc-supply = <&pm8941_l21>;
vqmmc-supply = <&pm8941_l13>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc2_pin_a>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_on>;
+ pinctrl-1 = <&sdc2_off>;
};
&tlmm {
- sdhc1_pin_a: sdhc1-pin-active {
+ sdc1_on: sdc1-on {
clk {
pins = "sdc1_clk";
drive-strength = <16>;
@@ -350,7 +352,7 @@ cmd-data {
};
};
- sdhc2_pin_a: sdhc2-pin-active {
+ sdc2_on: sdc2-on {
clk {
pins = "sdc2_clk";
drive-strength = <10>;
@@ -59,9 +59,6 @@ &blsp1_i2c1 {
status = "okay";
clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
-
charger: bq24192@6b {
compatible = "ti,bq24192";
reg = <0x6b>;
@@ -93,9 +90,6 @@ &blsp1_i2c2 {
status = "okay";
clock-frequency = <355000>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
-
synaptics@70 {
compatible = "syna,rmi4-i2c";
reg = <0x70>;
@@ -126,9 +120,6 @@ &blsp1_i2c3 {
status = "okay";
clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c3_pins>;
-
avago_apds993@39 {
compatible = "avago,apds9930";
reg = <0x39>;
@@ -144,9 +135,6 @@ &blsp2_i2c5 {
status = "okay";
clock-frequency = <355000>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c11_pins>;
-
led-controller@38 {
compatible = "ti,lm3630a";
status = "okay";
@@ -168,9 +156,6 @@ &blsp2_i2c6 {
status = "okay";
clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c12_pins>;
-
mpu6515@68 {
compatible = "invensense,mpu6515";
reg = <0x68>;
@@ -212,9 +197,6 @@ &blsp1_uart1 {
&blsp2_uart4 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&blsp2_uart4_pin_a>;
-
bluetooth {
compatible = "brcm,bcm43438-bt";
max-speed = <3000000>;
@@ -533,8 +515,9 @@ &sdhc_1 {
vmmc-supply = <&pm8941_l20>;
vqmmc-supply = <&pm8941_s3>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc1_pin_a>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_on>;
+ pinctrl-1 = <&sdc1_off>;
};
&sdhc_2 {
@@ -545,11 +528,9 @@ &sdhc_2 {
vqmmc-supply = <&pm8941_s3>;
non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc2_pin_a>;
-
- #address-cells = <1>;
- #size-cells = <0>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_on>;
+ pinctrl-1 = <&sdc2_off>;
bcrmf@1 {
compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
@@ -563,7 +544,7 @@ bcrmf@1 {
};
&tlmm {
- sdhc1_pin_a: sdhc1-pin-active {
+ sdc1_on: sdc1-on {
clk {
pins = "sdc1_clk";
drive-strength = <16>;
@@ -577,7 +558,7 @@ cmd-data {
};
};
- sdhc2_pin_a: sdhc2-pin-active {
+ sdc2_on: sdc2-on {
clk {
pins = "sdc2_clk";
drive-strength = <6>;
@@ -591,54 +572,6 @@ cmd-data {
};
};
- i2c1_pins: i2c1 {
- mux {
- pins = "gpio2", "gpio3";
- function = "blsp_i2c1";
-
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- i2c2_pins: i2c2 {
- mux {
- pins = "gpio6", "gpio7";
- function = "blsp_i2c2";
-
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- i2c3_pins: i2c3 {
- mux {
- pins = "gpio10", "gpio11";
- function = "blsp_i2c3";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- i2c11_pins: i2c11 {
- mux {
- pins = "gpio83", "gpio84";
- function = "blsp_i2c11";
-
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- i2c12_pins: i2c12 {
- mux {
- pins = "gpio87", "gpio88";
- function = "blsp_i2c12";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
mpu6515_pin: mpu6515 {
irq {
pins = "gpio73";
@@ -693,38 +626,4 @@ shutdown {
function = "gpio";
};
};
-
- blsp2_uart4_pin_a: blsp2-uart4-pin-active {
- tx {
- pins = "gpio53";
- function = "blsp_uart10";
-
- drive-strength = <2>;
- bias-disable;
- };
-
- rx {
- pins = "gpio54";
- function = "blsp_uart10";
-
- drive-strength = <2>;
- bias-pull-up;
- };
-
- cts {
- pins = "gpio55";
- function = "blsp_uart10";
-
- drive-strength = <2>;
- bias-pull-up;
- };
-
- rts {
- pins = "gpio56";
- function = "blsp_uart10";
-
- drive-strength = <2>;
- bias-disable;
- };
- };
};
@@ -55,9 +55,6 @@ &blsp1_i2c2 {
status = "okay";
clock-frequency = <355000>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
-
synaptics@2c {
compatible = "syna,rmi4-i2c";
reg = <0x2c>;
@@ -90,9 +87,6 @@ rmi4-f11@11 {
&blsp1_uart2 {
status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&blsp1_uart2_pin_a>;
};
&blsp2_dma {
@@ -350,8 +344,9 @@ &sdhc_1 {
vmmc-supply = <&pm8941_l20>;
vqmmc-supply = <&pm8941_s3>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc1_pin_a>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_on>;
+ pinctrl-1 = <&sdc1_off>;
};
&sdhc_2 {
@@ -362,8 +357,9 @@ &sdhc_2 {
cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_on>;
+ pinctrl-1 = <&sdc2_off>;
};
&smbb {
@@ -389,35 +385,7 @@ pin {
};
};
- blsp1_uart2_pin_a: blsp1-uart2-pin-active {
- rx {
- pins = "gpio5";
- function = "blsp_uart2";
-
- drive-strength = <2>;
- bias-pull-up;
- };
-
- tx {
- pins = "gpio4";
- function = "blsp_uart2";
-
- drive-strength = <4>;
- bias-disable;
- };
- };
-
- i2c2_pins: i2c2 {
- mux {
- pins = "gpio6", "gpio7";
- function = "blsp_i2c2";
-
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- sdhc1_pin_a: sdhc1-pin-active {
+ sdc1_on: sdc1-on {
clk {
pins = "sdc1_clk";
drive-strength = <16>;
@@ -431,15 +399,7 @@ cmd-data {
};
};
- sdhc2_cd_pin_a: sdhc2-cd-pin-active {
- pins = "gpio62";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- };
-
- sdhc2_pin_a: sdhc2-pin-active {
+ sdc2_on: sdc-on {
clk {
pins = "sdc2_clk";
drive-strength = <10>;
@@ -451,5 +411,12 @@ cmd-data {
drive-strength = <6>;
bias-pull-up;
};
+
+ cd {
+ pins = "gpio62";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
};
};
@@ -466,6 +466,9 @@ sdhc_3: sdhci@f9864900 {
clock-names = "core", "iface", "xo";
bus-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
status = "disabled";
};
@@ -482,6 +485,9 @@ sdhc_2: sdhci@f98a4900 {
clock-names = "core", "iface", "xo";
bus-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
status = "disabled";
};
@@ -510,6 +516,9 @@ blsp1_i2c1: i2c@f9923000 {
interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_i2c1_default>;
+ pinctrl-1 = <&blsp1_i2c1_sleep>;
#address-cells = <1>;
#size-cells = <0>;
};
@@ -521,6 +530,9 @@ blsp1_i2c2: i2c@f9924000 {
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_i2c2_default>;
+ pinctrl-1 = <&blsp1_i2c2_sleep>;
#address-cells = <1>;
#size-cells = <0>;
};
@@ -532,6 +544,9 @@ blsp1_i2c3: i2c@f9925000 {
interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_i2c3_default>;
+ pinctrl-1 = <&blsp1_i2c3_sleep>;
#address-cells = <1>;
#size-cells = <0>;
};
@@ -543,6 +558,9 @@ blsp1_i2c6: i2c@f9928000 {
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_i2c6_default>;
+ pinctrl-1 = <&blsp1_i2c6_sleep>;
#address-cells = <1>;
#size-cells = <0>;
};
@@ -591,6 +609,9 @@ blsp2_i2c2: i2c@f9964000 {
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_i2c2_default>;
+ pinctrl-1 = <&blsp2_i2c2_sleep>;
#address-cells = <1>;
#size-cells = <0>;
};
@@ -602,10 +623,13 @@ blsp2_i2c5: i2c@f9967000 {
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
- #address-cells = <1>;
- #size-cells = <0>;
dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_i2c5_default>;
+ pinctrl-1 = <&blsp2_i2c5_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
blsp2_i2c6: i2c@f9968000 {
@@ -1185,6 +1209,223 @@ tlmm: pinctrl@fd510000 {
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+ sdc1_off: sdc1-off {
+ clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc2_off: sdc2-off {
+ clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ cd {
+ pins = "gpio54";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ };
+
+ blsp1_uart2_active: blsp1-uart2-active {
+ rx {
+ pins = "gpio5";
+ function = "blsp_uart2";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ tx {
+ pins = "gpio4";
+ function = "blsp_uart2";
+ drive-strength = <4>;
+ bias-disable;
+ };
+ };
+
+ blsp2_uart1_active: blsp2-uart1-active {
+ tx-rts {
+ pins = "gpio41", "gpio44";
+ function = "blsp_uart7";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rx-cts {
+ pins = "gpio42", "gpio43";
+ function = "blsp_uart7";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ blsp2_uart1_sleep: blsp2-uart1-sleep {
+ pins = "gpio41", "gpio42", "gpio43", "gpio44";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ blsp2_uart4_active: blsp2-uart4-active {
+ tx-rts {
+ pins = "gpio53", "gpio56";
+ function = "blsp_uart10";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rx-cts {
+ pins = "gpio54", "gpio55";
+ function = "blsp_uart10";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ blsp1_i2c1_default: blsp1-i2c1-default {
+ pins = "gpio2", "gpio3";
+ function = "blsp_i2c1";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp1_i2c1_sleep: blsp1-i2c1-sleep {
+ pins = "gpio2", "gpio3";
+ function = "blsp_i2c1";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ blsp1_i2c2_default: blsp1-i2c2-default {
+ pins = "gpio6", "gpio7";
+ function = "blsp_i2c2";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp1_i2c2_sleep: blsp1-i2c2-sleep {
+ pins = "gpio6", "gpio7";
+ function = "blsp_i2c2";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ blsp1_i2c3_default: blsp1-i2c3-default {
+ pins = "gpio10", "gpio11";
+ function = "blsp_i2c3";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp1_i2c3_sleep: blsp1-i2c3-sleep {
+ pins = "gpio10", "gpio11";
+ function = "blsp_i2c3";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ /* BLSP1_I2C4 info is missing */
+
+ /* BLSP1_I2C5 info is missing */
+
+ blsp1_i2c6_default: blsp1-i2c6-default {
+ pins = "gpio29", "gpio30";
+ function = "blsp_i2c6";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp1_i2c6_sleep: blsp1-i2c6-sleep {
+ pins = "gpio29", "gpio30";
+ function = "blsp_i2c6";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ /* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */
+
+ /* BLSP2_I2C1 info is missing */
+
+ blsp2_i2c2_default: blsp2-i2c2-default {
+ pins = "gpio47", "gpio48";
+ function = "blsp_i2c8";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp2_i2c2_sleep: blsp2-i2c2-sleep {
+ pins = "gpio47", "gpio48";
+ function = "blsp_i2c8";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ /* BLSP2_I2C3 info is missing */
+
+ /* BLSP2_I2C4 info is missing */
+
+ blsp2_i2c5_default: blsp2-i2c5-default {
+ pins = "gpio83", "gpio84";
+ function = "blsp_i2c11";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp2_i2c5_sleep: blsp2-i2c5-sleep {
+ pins = "gpio83", "gpio84";
+ function = "blsp_i2c11";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ /* BLSP2_I2C6 info is missing - nobody uses it though? */
+
+ spi8_default: spi8_default {
+ mosi {
+ pins = "gpio45";
+ function = "blsp_spi8";
+ };
+ miso {
+ pins = "gpio46";
+ function = "blsp_spi8";
+ };
+ cs {
+ pins = "gpio47";
+ function = "blsp_spi8";
+ };
+ clk {
+ pins = "gpio48";
+ function = "blsp_spi8";
+ };
+ };
};
mmcc: clock-controller@fd8c0000 {
@@ -161,9 +161,6 @@ vreg_panel: panel-regulator {
&blsp1_i2c2 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
-
touchscreen@20 {
compatible = "syna,rmi4-i2c";
reg = <0x20>;
@@ -197,9 +194,6 @@ rmi4-f12@12 {
&blsp1_i2c6 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c6_pins>;
-
pmic@60 {
reg = <0x60>;
compatible = "maxim,max77826";
@@ -300,9 +294,6 @@ &blsp1_uart2 {
&blsp2_i2c6 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c12_pins>;
-
fuelgauge@36 {
compatible = "maxim,max17048";
reg = <0x36>;
@@ -668,24 +659,21 @@ &sdhc_1 {
vmmc-supply = <&pma8084_l20>;
vqmmc-supply = <&pma8084_s4>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc1_pin_a>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_on>;
+ pinctrl-1 = <&sdc1_off>;
};
&sdhc_2 {
status = "okay";
max-frequency = <100000000>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc3_pin_a>;
-
vmmc-supply = <&vreg_wlan>;
vqmmc-supply = <&pma8084_s4>;
-
non-removable;
- #address-cells = <1>;
- #size-cells = <0>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_on>;
+ pinctrl-1 = <&sdc2_off>;
wifi@1 {
reg = <1>;
@@ -703,7 +691,6 @@ wifi@1 {
&sdhc_3 {
status = "okay";
max-frequency = <100000000>;
-
vmmc-supply = <&pma8084_l21>;
vqmmc-supply = <&pma8084_l13>;
@@ -713,11 +700,12 @@ &sdhc_3 {
* cd-gpios the driver resorts to polling, so hotplug works.
*/
pinctrl-names = "default";
- pinctrl-0 = <&sdhc2_pin_a /* &sdhc2_cd_pin */>;
+ pinctrl-0 = <&sdc3_on /* &sdhc3_cd_pin */>;
/* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */
};
&tlmm {
+ /* This seems suspicious, but somebody with this device should look into it. */
blsp2_uart2_pins_active: blsp2-uart2-pins-active {
pins = "gpio45", "gpio46", "gpio47", "gpio48";
function = "blsp_uart8";
@@ -732,6 +720,7 @@ blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep {
bias-pull-down;
};
+
bt_pins: bt-pins {
hostwake {
pins = "gpio75";
@@ -747,7 +736,7 @@ devwake {
};
};
- sdhc1_pin_a: sdhc1-pin-active {
+ sdc1_on: sdhc1-on {
clk {
pins = "sdc1_clk";
drive-strength = <4>;
@@ -761,17 +750,14 @@ cmd-data {
};
};
- sdhc2_pin_a: sdhc2-pin-active {
- clk-cmd-data {
- pins = "gpio35", "gpio36", "gpio37", "gpio38",
- "gpio39", "gpio40";
- function = "sdc3";
- drive-strength = <8>;
- bias-disable;
- };
+ sdc3_on: sdc3-on {
+ pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+ function = "sdc3";
+ drive-strength = <8>;
+ bias-disable;
};
- sdhc2_cd_pin: sdhc2-cd {
+ sdhc3_cd_pin: sdc3-cd-on {
pins = "gpio62";
function = "gpio";
@@ -779,7 +765,7 @@ sdhc2_cd_pin: sdhc2-cd {
bias-disable;
};
- sdhc3_pin_a: sdhc3-pin-active {
+ sdc2_on: sdhc2-on {
clk {
pins = "sdc2_clk";
drive-strength = <6>;
@@ -793,36 +779,6 @@ cmd-data {
};
};
- i2c2_pins: i2c2 {
- mux {
- pins = "gpio6", "gpio7";
- function = "blsp_i2c2";
-
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- i2c6_pins: i2c6 {
- mux {
- pins = "gpio29", "gpio30";
- function = "blsp_i2c6";
-
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- i2c12_pins: i2c12 {
- mux {
- pins = "gpio87", "gpio88";
- function = "blsp_i2c12";
-
- drive-strength = <2>;
- bias-disable;
- };
- };
-
i2c_touchkey_pins: i2c-touchkey {
mux {
pins = "gpio95", "gpio96";
@@ -99,18 +99,12 @@ vreg_wlan: wlan-regulator {
&blsp1_uart2 {
status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&blsp1_uart2_pin_a>;
};
&blsp2_i2c2 {
status = "okay";
clock-frequency = <355000>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c8_pins>;
-
synaptics@2c {
compatible = "syna,rmi4-i2c";
reg = <0x2c>;
@@ -146,9 +140,6 @@ &blsp2_i2c5 {
status = "okay";
clock-frequency = <355000>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c11_pins>;
-
lp8566_wled: backlight@2c {
compatible = "ti,lp8556";
reg = <0x2c>;
@@ -207,17 +198,12 @@ rom_aeh {
&blsp2_uart1 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&blsp2_uart7_pin_a>;
-
bluetooth {
compatible = "brcm,bcm43438-bt";
max-speed = <3000000>;
pinctrl-names = "default";
- pinctrl-0 = <&bt_host_wake_pin>,
- <&bt_dev_wake_pin>,
- <&bt_reg_on_pin>;
+ pinctrl-0 = <&bt_host_wake_pin>, <&bt_dev_wake_pin>, <&bt_reg_on_pin>;
host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
@@ -478,8 +464,9 @@ &sdhc_1 {
vmmc-supply = <&pm8941_l20>;
vqmmc-supply = <&pm8941_s3>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc1_pin_a>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_on>;
+ pinctrl-1 = <&sdc1_off>;
};
&sdhc_2 {
@@ -490,8 +477,9 @@ &sdhc_2 {
cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_on>;
+ pinctrl-1 = <&sdc2_off>;
};
&sdhc_3 {
@@ -502,7 +490,7 @@ &sdhc_3 {
non-removable;
pinctrl-names = "default";
- pinctrl-0 = <&sdhc3_pin_a>;
+ pinctrl-0 = <&sdc3_on>;
#address-cells = <1>;
#size-cells = <0>;
@@ -530,78 +518,6 @@ &smbb {
};
&tlmm {
- blsp1_uart2_pin_a: blsp1-uart2-pin-active {
- rx {
- pins = "gpio5";
- function = "blsp_uart2";
-
- drive-strength = <2>;
- bias-pull-up;
- };
-
- tx {
- pins = "gpio4";
- function = "blsp_uart2";
-
- drive-strength = <4>;
- bias-disable;
- };
- };
-
- blsp2_uart7_pin_a: blsp2-uart7-pin-active {
- tx {
- pins = "gpio41";
- function = "blsp_uart7";
-
- drive-strength = <2>;
- bias-disable;
- };
-
- rx {
- pins = "gpio42";
- function = "blsp_uart7";
-
- drive-strength = <2>;
- bias-pull-up;
- };
-
- cts {
- pins = "gpio43";
- function = "blsp_uart7";
-
- drive-strength = <2>;
- bias-pull-up;
- };
-
- rts {
- pins = "gpio44";
- function = "blsp_uart7";
-
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- i2c8_pins: i2c8 {
- mux {
- pins = "gpio47", "gpio48";
- function = "blsp_i2c8";
-
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- i2c11_pins: i2c11 {
- mux {
- pins = "gpio83", "gpio84";
- function = "blsp_i2c11";
-
- drive-strength = <2>;
- bias-disable;
- };
- };
-
lcd_backlight_en_pin_a: lcd-backlight-vddio {
pins = "gpio69";
drive-strength = <10>;
@@ -609,7 +525,7 @@ lcd_backlight_en_pin_a: lcd-backlight-vddio {
bias-disable;
};
- sdhc1_pin_a: sdhc1-pin-active {
+ sdc1_on: sdc1-on {
clk {
pins = "sdc1_clk";
drive-strength = <16>;
@@ -623,15 +539,7 @@ cmd-data {
};
};
- sdhc2_cd_pin_a: sdhc2-cd-pin-active {
- pins = "gpio62";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- };
-
- sdhc2_pin_a: sdhc2-pin-active {
+ sdc2_on: sdc2-on {
clk {
pins = "sdc2_clk";
drive-strength = <6>;
@@ -643,13 +551,19 @@ cmd-data {
drive-strength = <6>;
bias-pull-up;
};
+
+ cd {
+ pins = "gpio62";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
};
- sdhc3_pin_a: sdhc3-pin-active {
+ sdc3_on: sdc3-on {
clk {
pins = "gpio40";
function = "sdc3";
-
drive-strength = <10>;
bias-disable;
};
@@ -657,7 +571,6 @@ clk {
cmd {
pins = "gpio39";
function = "sdc3";
-
drive-strength = <10>;
bias-pull-up;
};
@@ -665,27 +578,22 @@ cmd {
data {
pins = "gpio35", "gpio36", "gpio37", "gpio38";
function = "sdc3";
-
drive-strength = <10>;
bias-pull-up;
};
};
- ts_int_pin: synaptics {
- pin {
- pins = "gpio86";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- input-enable;
- };
+ ts_int_pin: ts-int-pin {
+ pins = "gpio86";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ input-enable;
};
bt_host_wake_pin: bt-host-wake {
pins = "gpio95";
function = "gpio";
-
drive-strength = <2>;
bias-disable;
output-low;
@@ -694,7 +602,6 @@ bt_host_wake_pin: bt-host-wake {
bt_dev_wake_pin: bt-dev-wake {
pins = "gpio96";
function = "gpio";
-
drive-strength = <2>;
bias-disable;
};
Clean up and commonize (where possible and it makes sense to) I2C, UART and SDHCI nodes and pin configurations. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> --- .../arm/boot/dts/qcom-apq8074-dragonboard.dts | 61 ++--- .../boot/dts/qcom-msm8974-fairphone-fp2.dts | 14 +- .../qcom-msm8974-lge-nexus5-hammerhead.dts | 117 +-------- .../dts/qcom-msm8974-sony-xperia-rhine.dtsi | 63 ++--- arch/arm/boot/dts/qcom-msm8974.dtsi | 245 +++++++++++++++++- .../boot/dts/qcom-msm8974pro-samsung-klte.dts | 78 ++---- ...-msm8974pro-sony-xperia-shinano-castor.dts | 141 ++-------- 7 files changed, 332 insertions(+), 387 deletions(-)