[10/23] ARM: dts: qcom-msm8974-lge-nexus5: Use &labels

Message ID	20220415115633.575010-11-konrad.dybcio@somainline.org
State	New
Headers	show Return-Path: <linux-arm-msm-owner@kernel.org> From: Konrad Dybcio <konrad.dybcio@somainline.org> To: ~postmarketos/upstreaming@lists.sr.ht Cc: martin.botka@somainline.org, angelogioacchino.delregno@somainline.org, marijn.suijten@somainline.org, jamipkettunen@somainline.org, Konrad Dybcio <konrad.dybcio@somainline.org>, Andy Gross <agross@kernel.org>, Bjorn Andersson <bjorn.andersson@linaro.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 10/23] ARM: dts: qcom-msm8974-lge-nexus5: Use &labels Date: Fri, 15 Apr 2022 13:56:20 +0200 Message-Id: <20220415115633.575010-11-konrad.dybcio@somainline.org> In-Reply-To: <20220415115633.575010-1-konrad.dybcio@somainline.org> References: <20220415115633.575010-1-konrad.dybcio@somainline.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	[01/23] ARM: dts: qcom--sony: Mention SONY board names in DT filenames \| expand [01/23] ARM: dts: qcom--sony: Mention SONY board names in DT filenames [02/23] ARM: dts: qcom-msm8974: Remove properties that are always overriden [03/23] ARM: dts: qcom-msm8974: Fix UART naming [04/23] ARM: dts: qcom-msm8974: Fix I2C labels [05/23] ARM: dts: qcom-msm8974: Fix up mdss nodes [06/23] ARM: dts: qcom-msm8974: Fix up SDHCI nodes [07/23] ARM: dts: qcom-msm8974: Rename msmgpio to tlmm [08/23] ARM: dts: qcom-apq8074-dragonboard: Use &labels [09/23] ARM: dts: qcom-msm8974-fp2: Use &labels [10/23] ARM: dts: qcom-msm8974-lge-nexus5: Use &labels [11/23] ARM: dts: qcom-msm8974-klte: Use &labels [12/23] ARM: dts: qcom-msm8974-{"hon","am"}ami: Commonize and modernize the DTs [13/23] ARM: dts: qcom-msm8974-castor: Use &labels [14/23] ARM: dts: qcom-msm8974pro: Use &labels [15/23] ARM: dts: qcom-msm8974pro-: Use the 8974pro name in DT filenames [16/23] ARM: dts: qcom-msm8974: Convert ADSP to a MMIO device [17/23] ARM: dts: qcom-msm8974: Sort and clean up nodes [18/23] ARM: dts: qcom-msm8974: Enable IMEM unconditionally [19/23] ARM: dts: qcom-msm8974: Consolidate I2C/UART/SDHCI [20/23] ARM: dts: qcom-msm8974: Clean up old GPIO declarations [21/23] ARM: dts: qcom-msm8974-rhine: Add NFC and enable I2C hosts [22/23] ARM: dts: qcom-msm8974-rhine: Add pstore node [23/23] ARM: dts: qcom-msm8974: Remove unnecessary include

diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index cf06d4a17097..a1cae3d453c2 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -19,206 +19,24 @@ chosen { stdout-path = "serial0:115200n8"; }; - smd { - rpm { - rpm_requests { - pm8841-regulators { - s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - }; - - s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s3 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - - s4 { - regulator-min-microvolt = <815000>; - regulator-max-microvolt = <900000>; - }; - }; - - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>; - vdd_l9_l10_l17_l22-supply = <&vreg_boost>; - vdd_l13_l20_l23_l24-supply = <&vreg_boost>; - vdd_l21-supply = <&vreg_boost>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - regulator-system-load = <200000>; - regulator-allow-set-load; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - }; - - l23 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + }; + + volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; }; }; @@ -237,525 +55,669 @@ vreg_wlan: wlan-regulator { }; }; -&soc { - serial@f991d000 { - status = "okay"; +&blsp1_i2c1 { + status = "okay"; + clock-frequency = <100000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + charger: bq24192@6b { + compatible = "ti,bq24192"; + reg = <0x6b>; + interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>; + + omit-battery-class; + + usb_otg_vbus: usb-otg-vbus { }; }; - pinctrl@fd510000 { - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; + fuelgauge: max17048@36 { + compatible = "maxim,max17048"; + reg = <0x36>; - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; + maxim,double-soc; + maxim,rcomp = /bits/ 8 <0x4d>; - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <6>; - bias-disable; - }; + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; + pinctrl-names = "default"; + pinctrl-0 = <&fuelgauge_pin>; - i2c1_pins: i2c1 { - mux { - pins = "gpio2", "gpio3"; - function = "blsp_i2c1"; + maxim,alert-low-soc-level = <2>; + }; +}; - drive-strength = <2>; - bias-disable; - }; - }; +&blsp1_i2c2 { + status = "okay"; + clock-frequency = <355000>; - i2c2_pins: i2c2 { - mux { - pins = "gpio6", "gpio7"; - function = "blsp_i2c2"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; - drive-strength = <2>; - bias-disable; - }; + synaptics@70 { + compatible = "syna,rmi4-i2c"; + reg = <0x70>; + + interrupts-extended = <&tlmm 5 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_pin>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; }; - i2c3_pins: i2c3 { - mux { - pins = "gpio10", "gpio11"; - function = "blsp_i2c3"; - drive-strength = <2>; - bias-disable; - }; + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; }; + }; +}; - i2c11_pins: i2c11 { - mux { - pins = "gpio83", "gpio84"; - function = "blsp_i2c11"; +&blsp1_i2c3 { + status = "okay"; + clock-frequency = <100000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + + avago_apds993@39 { + compatible = "avago,apds9930"; + reg = <0x39>; + interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l17>; + vddio-supply = <&pm8941_lvs1>; + led-max-microamp = <100000>; + amstaos,proximity-diodes = <0>; + }; +}; - drive-strength = <2>; - bias-disable; - }; +&blsp2_i2c5 { + status = "okay"; + clock-frequency = <355000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c11_pins>; + + led-controller@38 { + compatible = "ti,lm3630a"; + status = "okay"; + reg = <0x38>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + led-sources = <0 1>; + label = "lcd-backlight"; + default-brightness = <200>; }; + }; +}; + +&blsp2_i2c6 { + status = "okay"; + clock-frequency = <100000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c12_pins>; + + mpu6515@68 { + compatible = "invensense,mpu6515"; + reg = <0x68>; + interrupts-extended = <&tlmm 73 IRQ_TYPE_EDGE_FALLING>; + vddio-supply = <&pm8941_lvs1>; + + pinctrl-names = "default"; + pinctrl-0 = <&mpu6515_pin>; - i2c12_pins: i2c12 { - mux { - pins = "gpio87", "gpio88"; - function = "blsp_i2c12"; - drive-strength = <2>; - bias-disable; + mount-matrix = "0", "-1", "0", + "-1", "0", "0", + "0", "0", "1"; + + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + ak8963@f { + compatible = "asahi-kasei,ak8963"; + reg = <0x0f>; + gpios = <&tlmm 67 0>; + vid-supply = <&pm8941_lvs1>; + vdd-supply = <&pm8941_l17>; }; - }; - mpu6515_pin: mpu6515 { - irq { - pins = "gpio73"; - function = "gpio"; - bias-disable; - input-enable; + bmp280@76 { + compatible = "bosch,bmp280"; + reg = <0x76>; + vdda-supply = <&pm8941_lvs1>; + vddd-supply = <&pm8941_l17>; }; }; + }; +}; + +&blsp1_uart1 { + status = "okay"; +}; - touch_pin: touch { - int { - pins = "gpio5"; - function = "gpio"; +&blsp2_uart4 { + status = "okay"; - drive-strength = <2>; - bias-disable; - input-enable; - }; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_uart4_pin_a>; - reset { - pins = "gpio8"; - function = "gpio"; + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <3000000>; - drive-strength = <2>; - bias-pull-up; - }; - }; + pinctrl-names = "default"; + pinctrl-0 = <&bt_pin>; + + host-wakeup-gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>; + }; +}; - panel_pin: panel { - te { - pins = "gpio12"; - function = "mdp_vsync"; +&dsi0 { + status = "okay"; - drive-strength = <2>; - bias-disable; - }; - }; + vdda-supply = <&pm8941_l2>; + vdd-supply = <&pm8941_lvs3>; + vddio-supply = <&pm8941_l12>; - bt_pin: bt { - hostwake { - pins = "gpio42"; - function = "gpio"; - }; + panel: panel@0 { + reg = <0>; + compatible = "lg,acx467akm-7"; - devwake { - pins = "gpio62"; - function = "gpio"; - }; + pinctrl-names = "default"; + pinctrl-0 = <&panel_pin>; - shutdown { - pins = "gpio41"; - function = "gpio"; + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; }; }; + }; +}; - blsp2_uart4_pin_a: blsp2-uart4-pin-active { - tx { - pins = "gpio53"; - function = "blsp_uart10"; +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; - drive-strength = <2>; - bias-disable; - }; +&dsi0_phy { + status = "okay"; - rx { - pins = "gpio54"; - function = "blsp_uart10"; + vddio-supply = <&pm8941_l12>; +}; - drive-strength = <2>; - bias-pull-up; - }; +&mdss { + status = "okay"; +}; - cts { - pins = "gpio55"; - function = "blsp_uart10"; +&otg { + status = "okay"; - drive-strength = <2>; - bias-pull-up; - }; + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; - rts { - pins = "gpio56"; - function = "blsp_uart10"; + extcon = <&charger>, <&usb_id>; + vbus-supply = <&usb_otg_vbus>; - drive-strength = <2>; - bias-disable; - }; + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "okay"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + qcom,init-seq = /bits/ 8 <0x1 0x64>; }; }; +}; - sdhci@f9824900 { - status = "okay"; +&pm8941_gpios { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio2", "gpio3"; + function = "normal"; - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; + bias-pull-up; + power-source = <PM8941_GPIO_S3>; + }; - bus-width = <8>; - non-removable; + fuelgauge_pin: fuelgauge-int { + pins = "gpio9"; + function = "normal"; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; + bias-disable; + input-enable; + power-source = <PM8941_GPIO_S3>; }; - sdhci@f98a4900 { - status = "okay"; + wlan_sleep_clk_pin: wl-sleep-clk { + pins = "gpio16"; + function = "func2"; - max-frequency = <100000000>; - bus-width = <4>; - non-removable; - vmmc-supply = <&vreg_wlan>; - vqmmc-supply = <&pm8941_s3>; + output-high; + power-source = <PM8941_GPIO_S3>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>; + wlan_regulator_pin: wl-reg-active { + pins = "gpio17"; + function = "normal"; - #address-cells = <1>; - #size-cells = <0>; + bias-disable; + power-source = <PM8941_GPIO_S3>; + }; + + otg { + gpio-hog; + gpios = <35 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "otg-gpio"; + }; +}; - bcrmf@1 { - compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; - reg = <1>; +&rpm_requests { + pm8841-regulators { + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; - brcm,drive-strength = <10>; + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&wlan_sleep_clk_pin>; + pm8841_s3: s3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s4: s4 { + regulator-min-microvolt = <815000>; + regulator-max-microvolt = <900000>; }; }; - gpio-keys { - compatible = "gpio-keys"; + pm8941-regulators { + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; - volume-up { - label = "volume_up"; - gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEUP>; + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; }; - volume-down { - label = "volume_down"; - gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEDOWN>; + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; }; - }; - serial@f9960000 { - status = "okay"; + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&blsp2_uart4_pin_a>; + pm8941_l3: l3 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <3000000>; + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&bt_pin>; + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - host-wakeup-gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; - device-wakeup-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>; + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; }; - }; - i2c@f9967000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c11_pins>; - clock-frequency = <355000>; - qcom,src-freq = <50000000>; + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; - led-controller@38 { - compatible = "ti,lm3630a"; - status = "okay"; - reg = <0x38>; + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - #address-cells = <1>; - #size-cells = <0>; + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; - led@0 { - reg = <0>; - led-sources = <0 1>; - label = "lcd-backlight"; - default-brightness = <200>; - }; + pm8941_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; }; - }; - i2c@f9968000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c12_pins>; - clock-frequency = <100000>; - qcom,src-freq = <50000000>; - - mpu6515@68 { - compatible = "invensense,mpu6515"; - reg = <0x68>; - interrupts-extended = <&tlmm 73 IRQ_TYPE_EDGE_FALLING>; - vddio-supply = <&pm8941_lvs1>; - - pinctrl-names = "default"; - pinctrl-0 = <&mpu6515_pin>; - - mount-matrix = "0", "-1", "0", - "-1", "0", "0", - "0", "0", "1"; - - i2c-gate { - #address-cells = <1>; - #size-cells = <0>; - ak8963@f { - compatible = "asahi-kasei,ak8963"; - reg = <0x0f>; - gpios = <&tlmm 67 0>; - vid-supply = <&pm8941_lvs1>; - vdd-supply = <&pm8941_l17>; - }; - - bmp280@76 { - compatible = "bosch,bmp280"; - reg = <0x76>; - vdda-supply = <&pm8941_lvs1>; - vddd-supply = <&pm8941_l17>; - }; - }; + pm8941_l11: l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; }; - }; - i2c@f9923000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - clock-frequency = <100000>; - qcom,src-freq = <50000000>; + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; - charger: bq24192@6b { - compatible = "ti,bq24192"; - reg = <0x6b>; - interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>; + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; - omit-battery-class; + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - usb_otg_vbus: usb-otg-vbus { }; + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; }; - fuelgauge: max17048@36 { - compatible = "maxim,max17048"; - reg = <0x36>; + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; - maxim,double-soc; - maxim,rcomp = /bits/ 8 <0x4d>; + pm8941_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; - interrupt-parent = <&tlmm>; - interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + pm8941_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; - pinctrl-names = "default"; - pinctrl-0 = <&fuelgauge_pin>; + pm8941_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; - maxim,alert-low-soc-level = <2>; + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; }; }; +}; - i2c@f9924000 { - status = "okay"; +&sdhc_1 { + status = "okay"; - clock-frequency = <355000>; - qcom,src-freq = <50000000>; + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + pinctrl-0 = <&sdhc1_pin_a>; +}; - synaptics@70 { - compatible = "syna,rmi4-i2c"; - reg = <0x70>; +&sdhc_2 { + status = "okay"; - interrupts-extended = <&tlmm 5 IRQ_TYPE_EDGE_FALLING>; - vdd-supply = <&pm8941_l22>; - vio-supply = <&pm8941_lvs3>; + max-frequency = <100000000>; + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pm8941_s3>; + non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&touch_pin>; + pinctrl-names = "default"; + pinctrl-0 = <&sdhc2_pin_a>; - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; + bcrmf@1 { + compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; + reg = <1>; - rmi4-f12@12 { - reg = <0x12>; - syna,sensor-type = <1>; - }; + brcm,drive-strength = <10>; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin>; + }; +}; + +&tlmm { + sdhc1_pin_a: sdhc1-pin-active { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; }; }; - i2c@f9925000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins>; - clock-frequency = <100000>; - qcom,src-freq = <50000000>; + sdhc2_pin_a: sdhc2-pin-active { + clk { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; - avago_apds993@39 { - compatible = "avago,apds9930"; - reg = <0x39>; - interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>; - vdd-supply = <&pm8941_l17>; - vddio-supply = <&pm8941_lvs1>; - led-max-microamp = <100000>; - amstaos,proximity-diodes = <0>; + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; }; }; - usb@f9a55000 { - status = "okay"; + i2c1_pins: i2c1 { + mux { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; + drive-strength = <2>; + bias-disable; + }; + }; - extcon = <&charger>, <&usb_id>; - vbus-supply = <&usb_otg_vbus>; + i2c2_pins: i2c2 { + mux { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; - hnp-disable; - srp-disable; - adp-disable; + drive-strength = <2>; + bias-disable; + }; + }; - ulpi { - phy@a { - status = "okay"; + i2c3_pins: i2c3 { + mux { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + }; - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; + i2c11_pins: i2c11 { + mux { + pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; + drive-strength = <2>; + bias-disable; }; }; - mdss@fd900000 { - status = "okay"; + i2c12_pins: i2c12 { + mux { + pins = "gpio87", "gpio88"; + function = "blsp_i2c12"; + drive-strength = <2>; + bias-disable; + }; + }; - mdp@fd900000 { - status = "okay"; + mpu6515_pin: mpu6515 { + irq { + pins = "gpio73"; + function = "gpio"; + bias-disable; + input-enable; }; + }; - dsi@fd922800 { - status = "okay"; + touch_pin: touch { + int { + pins = "gpio5"; + function = "gpio"; - vdda-supply = <&pm8941_l2>; - vdd-supply = <&pm8941_lvs3>; - vddio-supply = <&pm8941_l12>; + drive-strength = <2>; + bias-disable; + input-enable; + }; - #address-cells = <1>; - #size-cells = <0>; + reset { + pins = "gpio8"; + function = "gpio"; - ports { - port@1 { - endpoint { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; - }; - }; - }; + drive-strength = <2>; + bias-pull-up; + }; + }; - panel: panel@0 { - reg = <0>; - compatible = "lg,acx467akm-7"; + panel_pin: panel { + te { + pins = "gpio12"; + function = "mdp_vsync"; - pinctrl-names = "default"; - pinctrl-0 = <&panel_pin>; + drive-strength = <2>; + bias-disable; + }; + }; - port { - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; + bt_pin: bt { + hostwake { + pins = "gpio42"; + function = "gpio"; }; - dsi-phy@fd922a00 { - status = "okay"; + devwake { + pins = "gpio62"; + function = "gpio"; + }; - vddio-supply = <&pm8941_l12>; + shutdown { + pins = "gpio41"; + function = "gpio"; }; }; -}; -&spmi_bus { - pm8941@0 { - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio2", "gpio3"; - function = "normal"; + blsp2_uart4_pin_a: blsp2-uart4-pin-active { + tx { + pins = "gpio53"; + function = "blsp_uart10"; - bias-pull-up; - power-source = <PM8941_GPIO_S3>; - }; + drive-strength = <2>; + bias-disable; + }; - fuelgauge_pin: fuelgauge-int { - pins = "gpio9"; - function = "normal"; + rx { + pins = "gpio54"; + function = "blsp_uart10"; - bias-disable; - input-enable; - power-source = <PM8941_GPIO_S3>; - }; - - wlan_sleep_clk_pin: wl-sleep-clk { - pins = "gpio16"; - function = "func2"; + drive-strength = <2>; + bias-pull-up; + }; - output-high; - power-source = <PM8941_GPIO_S3>; - }; + cts { + pins = "gpio55"; + function = "blsp_uart10"; - wlan_regulator_pin: wl-reg-active { - pins = "gpio17"; - function = "normal"; + drive-strength = <2>; + bias-pull-up; + }; - bias-disable; - power-source = <PM8941_GPIO_S3>; - }; + rts { + pins = "gpio56"; + function = "blsp_uart10"; - otg { - gpio-hog; - gpios = <35 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "otg-gpio"; - }; + drive-strength = <2>; + bias-disable; }; }; };

[10/23] ARM: dts: qcom-msm8974-lge-nexus5: Use &labels

Commit Message

Patch