@@ -1265,7 +1265,7 @@ static void __init clk_disable_unused_subtree(struct clk_core *core)
* sequence. call .disable_unused if available, otherwise fall
* back to .disable
*/
- if (clk_core_is_enabled(core)) {
+ if (clk_core_is_enabled(core) || core->flags & CLK_ASSUME_ENABLED_WHEN_UNUSED) {
trace_clk_disable(core);
if (core->ops->disable_unused)
core->ops->disable_unused(core->hw);
@@ -32,6 +32,8 @@
#define CLK_OPS_PARENT_ENABLE BIT(12)
/* duty cycle call may be forwarded to the parent clock */
#define CLK_DUTY_CYCLE_PARENT BIT(13)
+/* assume clock is enabled if found unused in late init */
+#define CLK_ASSUME_ENABLED_WHEN_UNUSED BIT(14)
struct clk;
struct clk_hw;
Some clock implementations doesn't provide means of implementing is_enabled(), but still requires to be explicitly disabled when found unused as part of clk_disable_unused(). One such set of clocks are Qualcomm's display RCGs. These can be enabled and disabled automatically by the hardware, so it's not possible to reliably query their configuration. Further more, these clocks need to be disabled when unused, to allow them to be "parked" onto a safe parent. Failure to disable the RCG results in the hardware locking up as clk_disable_unused() traverses up the tree and turns off its source clocks. Add a new flag, CLK_ASSUME_ENABLED_BOOT, which clock drivers can use to signal that these clocks should be disabled even if they don't implement the is_enabled() ops. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- drivers/clk/clk.c | 2 +- include/linux/clk-provider.h | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-)