| Message ID | 20210708120656.663851-5-thara.gopinath@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | Introduce LMh driver for Qualcomm SoCs | expand |
On Thu 08 Jul 07:06 CDT 2021, Thara Gopinath wrote: > Add LMh nodes for cpu cluster0 and cpu cluster1. Also add interrupt > support in cpufreq node to capture the LMh interrupt and let the scheduler > know of the max frequency throttling. > Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> > --- > > v2->v3: > - Changed the LMh low and high trip to 94500 and 95000 mC from > 74500 and 75000 mC. This was a bug that got introduced in v2. > v1->v2: > - Dropped dt property qcom,support-lmh as per Bjorn's review comments. > - Changed lmh compatible from generic to platform specific. > - Introduced properties specifying arm, low and high temp thresholds for LMh > as per Daniel's suggestion. > > arch/arm64/boot/dts/qcom/sdm845.dtsi | 26 ++++++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi > index 0a86fe71a66d..4da6b8f3dd7b 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > @@ -3646,6 +3646,30 @@ swm: swm@c85 { > }; > }; > > + lmh_cluster1: lmh@17d70800 { > + compatible = "qcom,sdm845-lmh"; > + reg = <0 0x17d70800 0 0x401>; > + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; > + qcom,lmh-cpu-id = <0x4>; > + qcom,lmh-temperature-arm = <65000>; > + qcom,lmh-temperature-low = <94500>; > + qcom,lmh-temperature-high = <95000>; > + interrupt-controller; > + #interrupt-cells = <1>; > + }; > + > + lmh_cluster0: lmh@17d78800 { > + compatible = "qcom,sdm845-lmh"; > + reg = <0 0x17d78800 0 0x401>; > + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; > + qcom,lmh-cpu-id = <0x0>; > + qcom,lmh-temperature-arm = <65000>; > + qcom,lmh-temperature-low = <94500>; > + qcom,lmh-temperature-high = <95000>; > + interrupt-controller; > + #interrupt-cells = <1>; > + }; > + > sound: sound { > }; > > @@ -4911,6 +4935,8 @@ cpufreq_hw: cpufreq@17d43000 { > reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>; > reg-names = "freq-domain0", "freq-domain1"; > > + interrupts-extended = <&lmh_cluster0 0>, <&lmh_cluster1 0>; > + > clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; > clock-names = "xo", "alternate"; > > -- > 2.25.1 >
On Thu 08 Jul 07:06 CDT 2021, Thara Gopinath wrote: > Add LMh nodes for cpu cluster0 and cpu cluster1. Also add interrupt > support in cpufreq node to capture the LMh interrupt and let the scheduler > know of the max frequency throttling. > Just noticed, could you please drop "boot: " from $subject and add the missing '8', as you're resubmitting the series. Regards, Bjorn > Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> > --- > > v2->v3: > - Changed the LMh low and high trip to 94500 and 95000 mC from > 74500 and 75000 mC. This was a bug that got introduced in v2. > v1->v2: > - Dropped dt property qcom,support-lmh as per Bjorn's review comments. > - Changed lmh compatible from generic to platform specific. > - Introduced properties specifying arm, low and high temp thresholds for LMh > as per Daniel's suggestion. > > arch/arm64/boot/dts/qcom/sdm845.dtsi | 26 ++++++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi > index 0a86fe71a66d..4da6b8f3dd7b 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > @@ -3646,6 +3646,30 @@ swm: swm@c85 { > }; > }; > > + lmh_cluster1: lmh@17d70800 { > + compatible = "qcom,sdm845-lmh"; > + reg = <0 0x17d70800 0 0x401>; > + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; > + qcom,lmh-cpu-id = <0x4>; > + qcom,lmh-temperature-arm = <65000>; > + qcom,lmh-temperature-low = <94500>; > + qcom,lmh-temperature-high = <95000>; > + interrupt-controller; > + #interrupt-cells = <1>; > + }; > + > + lmh_cluster0: lmh@17d78800 { > + compatible = "qcom,sdm845-lmh"; > + reg = <0 0x17d78800 0 0x401>; > + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; > + qcom,lmh-cpu-id = <0x0>; > + qcom,lmh-temperature-arm = <65000>; > + qcom,lmh-temperature-low = <94500>; > + qcom,lmh-temperature-high = <95000>; > + interrupt-controller; > + #interrupt-cells = <1>; > + }; > + > sound: sound { > }; > > @@ -4911,6 +4935,8 @@ cpufreq_hw: cpufreq@17d43000 { > reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>; > reg-names = "freq-domain0", "freq-domain1"; > > + interrupts-extended = <&lmh_cluster0 0>, <&lmh_cluster1 0>; > + > clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; > clock-names = "xo", "alternate"; > > -- > 2.25.1 >
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 0a86fe71a66d..4da6b8f3dd7b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -3646,6 +3646,30 @@ swm: swm@c85 { }; }; + lmh_cluster1: lmh@17d70800 { + compatible = "qcom,sdm845-lmh"; + reg = <0 0x17d70800 0 0x401>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + qcom,lmh-cpu-id = <0x4>; + qcom,lmh-temperature-arm = <65000>; + qcom,lmh-temperature-low = <94500>; + qcom,lmh-temperature-high = <95000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + lmh_cluster0: lmh@17d78800 { + compatible = "qcom,sdm845-lmh"; + reg = <0 0x17d78800 0 0x401>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + qcom,lmh-cpu-id = <0x0>; + qcom,lmh-temperature-arm = <65000>; + qcom,lmh-temperature-low = <94500>; + qcom,lmh-temperature-high = <95000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + sound: sound { }; @@ -4911,6 +4935,8 @@ cpufreq_hw: cpufreq@17d43000 { reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>; reg-names = "freq-domain0", "freq-domain1"; + interrupts-extended = <&lmh_cluster0 0>, <&lmh_cluster1 0>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; clock-names = "xo", "alternate";
Add LMh nodes for cpu cluster0 and cpu cluster1. Also add interrupt support in cpufreq node to capture the LMh interrupt and let the scheduler know of the max frequency throttling. Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> --- v2->v3: - Changed the LMh low and high trip to 94500 and 95000 mC from 74500 and 75000 mC. This was a bug that got introduced in v2. v1->v2: - Dropped dt property qcom,support-lmh as per Bjorn's review comments. - Changed lmh compatible from generic to platform specific. - Introduced properties specifying arm, low and high temp thresholds for LMh as per Daniel's suggestion. arch/arm64/boot/dts/qcom/sdm845.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)