diff mbox series

[04/17] media: camss: csid-170: fix non-10bit formats

Message ID 20210608223513.23193-5-jonathan@marek.ca
State Accepted
Commit 14d510e040f85ff05734fd6db8bae44b47886464
Headers show
Series None | expand

Commit Message

Jonathan Marek June 8, 2021, 10:34 p.m. UTC 
Use the decode_format/data_type from the "format" struct instead of a
hardcoded 10-bit format.

Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
---
 drivers/media/platform/qcom/camss/camss-csid-170.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/platform/qcom/camss/camss-csid-170.c b/drivers/media/platform/qcom/camss/camss-csid-170.c
index ac22ff29d2a9f..aa65043c33037 100644
--- a/drivers/media/platform/qcom/camss/camss-csid-170.c
+++ b/drivers/media/platform/qcom/camss/camss-csid-170.c
@@ -366,7 +366,7 @@  static void csid_configure_stream(struct csid_device *csid, u8 enable)
 			val |= input_format->width & 0x1fff << TPG_DT_n_CFG_0_FRAME_WIDTH;
 			writel_relaxed(val, csid->base + CSID_TPG_DT_n_CFG_0(0));
 
-			val = DATA_TYPE_RAW_10BIT << TPG_DT_n_CFG_1_DATA_TYPE;
+			val = format->data_type << TPG_DT_n_CFG_1_DATA_TYPE;
 			writel_relaxed(val, csid->base + CSID_TPG_DT_n_CFG_1(0));
 
 			val = tg->mode << TPG_DT_n_CFG_2_PAYLOAD_MODE;
@@ -382,8 +382,9 @@  static void csid_configure_stream(struct csid_device *csid, u8 enable)
 		val = 1 << RDI_CFG0_BYTE_CNTR_EN;
 		val |= 1 << RDI_CFG0_FORMAT_MEASURE_EN;
 		val |= 1 << RDI_CFG0_TIMESTAMP_EN;
+		/* note: for non-RDI path, this should be format->decode_format */
 		val |= DECODE_FORMAT_PAYLOAD_ONLY << RDI_CFG0_DECODE_FORMAT;
-		val |= DATA_TYPE_RAW_10BIT << RDI_CFG0_DATA_TYPE;
+		val |= format->data_type << RDI_CFG0_DATA_TYPE;
 		val |= vc << RDI_CFG0_VIRTUAL_CHANNEL;
 		val |= dt_id << RDI_CFG0_DT_ID;
 		writel_relaxed(val, csid->base + CSID_RDI_CFG0(0));