@@ -14,15 +14,6 @@ / {
compatible = "google,lazor-rev0", "qcom,sc7180";
};
-/*
- * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
- * not supported by the PM6150 ADC driver. Disable the charger thermal zone
- * to avoid using bogus temperature values.
- */
-&charger_thermal {
- status = "disabled";
-};
-
&pp3300_hub {
/* pp3300_l7c is used to power the USB hub */
/delete-property/regulator-always-on;
@@ -14,15 +14,6 @@ / {
compatible = "google,lazor-rev1", "google,lazor-rev2", "qcom,sc7180";
};
-/*
- * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
- * not supported by the PM6150 ADC driver. Disable the charger thermal zone
- * to avoid using bogus temperature values.
- */
-&charger_thermal {
- status = "disabled";
-};
-
&pp3300_hub {
/* pp3300_l7c is used to power the USB hub */
/delete-property/regulator-always-on;
@@ -14,12 +14,3 @@ / {
model = "Google Lazor (rev3+)";
compatible = "google,lazor", "qcom,sc7180";
};
-
-/*
- * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
- * not supported by the PM6150 ADC driver. Disable the charger thermal zone
- * to avoid using bogus temperature values.
- */
-&charger_thermal {
- status = "disabled";
-};
@@ -21,6 +21,15 @@ &ap_sar_sensor {
semtech,avg-pos-strength = <64>;
};
+/*
+ * Lazor is stuffed with a 47k NTC as charger thermistor which currently is
+ * not supported by the PM6150 ADC driver. Disable the charger thermal zone
+ * to avoid using bogus temperature values.
+ */
+&charger_thermal {
+ status = "disabled";
+};
+
ap_ts_pen_1v8: &i2c4 {
status = "okay";
clock-frequency = <400000>;
Commit f73558cc83d1 ("arm64: dts: qcom: sc7180: Disable charger thermal zone for lazor") disables the charger thermal zone for specific lazor revisions due to an unsupported thermistor type. The initial idea was to disable the thermal zone for older revisions and leave it enabled for newer ones that use a supported thermistor. Finally the thermistor won't be changed on newer revisions, hence the thermal zone should be disabled for all lazor (and limozeen) revisions. Instead of disabling it per revision do it once in the shared .dtsi for lazor. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> --- Changes in v3: - fixed order of nodes in sc7180-trogdor-lazor.dtsi Changes in v2: - none arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts | 9 --------- arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts | 9 --------- arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts | 9 --------- arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi | 9 +++++++++ 4 files changed, 9 insertions(+), 27 deletions(-)