@@ -3911,6 +3911,141 @@ videocc: clock-controller@ab00000 {
#reset-cells = <1>;
};
+ camss: camss@a00000 {
+ compatible = "qcom,sdm845-camss";
+
+ reg = <0 0xacb3000 0 0x1000>,
+ <0 0xacba000 0 0x1000>,
+ <0 0xacc8000 0 0x1000>,
+ <0 0xac65000 0 0x1000>,
+ <0 0xac66000 0 0x1000>,
+ <0 0xac67000 0 0x1000>,
+ <0 0xac68000 0 0x1000>,
+ <0 0xacaf000 0 0x4000>,
+ <0 0xacb6000 0 0x4000>,
+ <0 0xacc4000 0 0x4000>;
+ reg-names = "csid0",
+ "csid1",
+ "csid2",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "vfe0",
+ "vfe1",
+ "vfe_lite";
+
+ interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "csid0",
+ "csid1",
+ "csid2",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "vfe0",
+ "vfe1",
+ "vfe_lite";
+
+ power-domains = <&clock_camcc IFE_0_GDSC>,
+ <&clock_camcc IFE_1_GDSC>,
+ <&clock_camcc TITAN_TOP_GDSC>;
+
+ clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&clock_camcc CAM_CC_CPAS_AHB_CLK>,
+ <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>,
+ <&clock_camcc CAM_CC_IFE_0_CSID_CLK>,
+ <&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>,
+ <&clock_camcc CAM_CC_IFE_1_CSID_CLK>,
+ <&clock_camcc CAM_CC_IFE_1_CSID_CLK_SRC>,
+ <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>,
+ <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>,
+ <&clock_camcc CAM_CC_CSIPHY0_CLK>,
+ <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>,
+ <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>,
+ <&clock_camcc CAM_CC_CSIPHY1_CLK>,
+ <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>,
+ <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>,
+ <&clock_camcc CAM_CC_CSIPHY2_CLK>,
+ <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>,
+ <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>,
+ <&clock_camcc CAM_CC_CSIPHY3_CLK>,
+ <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>,
+ <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK_SRC>,
+ <&gcc GCC_CAMERA_AHB_CLK>,
+ <&gcc GCC_CAMERA_AXI_CLK>,
+ <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+ <&clock_camcc CAM_CC_SOC_AHB_CLK>,
+ <&clock_camcc CAM_CC_IFE_0_AXI_CLK>,
+ <&clock_camcc CAM_CC_IFE_0_CLK>,
+ <&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+ <&clock_camcc CAM_CC_IFE_0_CLK_SRC>,
+ <&clock_camcc CAM_CC_IFE_1_AXI_CLK>,
+ <&clock_camcc CAM_CC_IFE_1_CLK>,
+ <&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+ <&clock_camcc CAM_CC_IFE_1_CLK_SRC>,
+ <&clock_camcc CAM_CC_IFE_LITE_CLK>,
+ <&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+ <&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cphy_rx_src",
+ "csi0",
+ "csi0_src",
+ "csi1",
+ "csi1_src",
+ "csi2",
+ "csi2_src",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy0_timer_src",
+ "csiphy1",
+ "csiphy1_timer",
+ "csiphy1_timer_src",
+ "csiphy2",
+ "csiphy2_timer",
+ "csiphy2_timer_src",
+ "csiphy3",
+ "csiphy3_timer",
+ "csiphy3_timer_src",
+ "gcc_camera_ahb",
+ "gcc_camera_axi",
+ "slow_ahb_src",
+ "soc_ahb",
+ "vfe0_axi",
+ "vfe0",
+ "vfe0_cphy_rx",
+ "vfe0_src",
+ "vfe1_axi",
+ "vfe1",
+ "vfe1_cphy_rx",
+ "vfe1_src",
+ "vfe_lite",
+ "vfe_lite_cphy_rx",
+ "vfe_lite_src";
+
+ iommus = <&apps_smmu 0x0808 0x0>,
+ <&apps_smmu 0x0810 0x8>,
+ <&apps_smmu 0x0c08 0x0>,
+ <&apps_smmu 0x0c10 0x8>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
cci: cci@ac4a000 {
compatible = "qcom,sdm845-cci";
#address-cells = <1>;
Add the camss dt node for sdm845. Signed-off-by: Robert Foss <robert.foss@linaro.org> --- Changes since v1 - Laurent: Fix subject - Laurent: Remove redundant regulator labels - Laurent: Remove empty line Changes since v3 - Fixed ordering of IRQs - Add newlines for better readability arch/arm64/boot/dts/qcom/sdm845.dtsi | 135 +++++++++++++++++++++++++++ 1 file changed, 135 insertions(+)