From patchwork Wed Jan 13 19:42:10 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: AngeloGioacchino Del Regno X-Patchwork-Id: 362219 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-14.0 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,UNWANTED_LANGUAGE_BODY, URIBL_BLOCKED, USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9370CC433E6 for ; Wed, 13 Jan 2021 19:43:53 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 363C423356 for ; Wed, 13 Jan 2021 19:43:53 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728819AbhAMTnj (ORCPT ); Wed, 13 Jan 2021 14:43:39 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48714 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728695AbhAMTnj (ORCPT ); Wed, 13 Jan 2021 14:43:39 -0500 Received: from relay03.th.seeweb.it (relay03.th.seeweb.it [IPv6:2001:4b7a:2000:18::164]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 0BB7CC0617A3 for ; Wed, 13 Jan 2021 11:42:19 -0800 (PST) Received: from IcarusMOD.eternityproject.eu (unknown [2.237.20.237]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by m-r1.th.seeweb.it (Postfix) with ESMTPSA id 74A631FED3; Wed, 13 Jan 2021 20:42:17 +0100 (CET) From: AngeloGioacchino Del Regno To: linux-arm-msm@vger.kernel.org Cc: agross@kernel.org, bjorn.andersson@linaro.org, lgirdwood@gmail.com, broonie@kernel.org, robh+dt@kernel.org, sumit.semwal@linaro.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, phone-devel@vger.kernel.org, konrad.dybcio@somainline.org, marijn.suijten@somainline.org, martin.botka@somainline.org, AngeloGioacchino Del Regno Subject: [PATCH v2 3/7] regulator: qcom-labibb: Implement pull-down, softstart, active discharge Date: Wed, 13 Jan 2021 20:42:10 +0100 Message-Id: <20210113194214.522238-4-angelogioacchino.delregno@somainline.org> X-Mailer: git-send-email 2.29.2 In-Reply-To: <20210113194214.522238-1-angelogioacchino.delregno@somainline.org> References: <20210113194214.522238-1-angelogioacchino.delregno@somainline.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Soft start is required to avoid inrush current during LAB ramp-up and IBB ramp-down, protecting connected hardware to which we supply voltage. Since soft start is configurable on both LAB and IBB regulators, it was necessary to add two DT properties, respectively "qcom,soft-start-us" to control LAB ramp-up and "qcom,discharge-resistor-kohms" to control the discharge resistor for IBB ramp-down, which obviously brought the need of implementing a of_parse callback for both regulators. Finally, also implement pull-down mode in order to avoid unpredictable behavior when the regulators are disabled (random voltage spikes etc). Signed-off-by: AngeloGioacchino Del Regno Reviewed-by: Bjorn Andersson --- drivers/regulator/qcom-labibb-regulator.c | 94 +++++++++++++++++++++++ 1 file changed, 94 insertions(+) diff --git a/drivers/regulator/qcom-labibb-regulator.c b/drivers/regulator/qcom-labibb-regulator.c index d364f54ad294..38ab1eba1c59 100644 --- a/drivers/regulator/qcom-labibb-regulator.c +++ b/drivers/regulator/qcom-labibb-regulator.c @@ -29,12 +29,23 @@ #define LABIBB_STATUS1_VREG_OK_BIT BIT(7) #define LABIBB_CONTROL_ENABLE BIT(7) +#define REG_LABIBB_PD_CTL 0x47 + #define LAB_PD_CTL_MASK GENMASK(1, 0) + #define IBB_PD_CTL_MASK (BIT(0) | BIT(7)) + #define LAB_PD_CTL_STRONG_PULL BIT(0) + #define IBB_PD_CTL_HALF_STRENGTH BIT(0) + #define IBB_PD_CTL_EN BIT(7) + #define REG_LABIBB_CURRENT_LIMIT 0x4b #define LAB_CURRENT_LIMIT_MASK GENMASK(2, 0) #define IBB_CURRENT_LIMIT_MASK GENMASK(4, 0) #define LAB_CURRENT_LIMIT_OVERRIDE_EN BIT(3) #define LABIBB_CURRENT_LIMIT_EN BIT(7) +#define REG_IBB_PWRUP_PWRDN_CTL_1 0x58 + #define IBB_CTL_1_DISCHARGE_EN BIT(2) + +#define REG_LABIBB_SOFT_START_CTL 0x5f #define REG_LABIBB_SEC_ACCESS 0xd0 #define LABIBB_SEC_UNLOCK_CODE 0xa5 @@ -60,6 +71,8 @@ struct labibb_regulator { struct labibb_current_limits uA_limits; u16 base; u8 type; + u8 dischg_sel; + u8 soft_start_sel; }; struct labibb_regulator_data { @@ -120,6 +133,70 @@ static int qcom_labibb_get_current_limit(struct regulator_dev *rdev) return (cur_step * lim->uA_step) + lim->uA_min; } +static int qcom_labibb_set_soft_start(struct regulator_dev *rdev) +{ + struct labibb_regulator *vreg = rdev_get_drvdata(rdev); + u32 val = 0; + + if (vreg->type == QCOM_IBB_TYPE) + val = vreg->dischg_sel; + else + val = vreg->soft_start_sel; + + return regmap_write(rdev->regmap, rdev->desc->soft_start_reg, val); +} + +static int qcom_labibb_get_table_sel(const int *table, int sz, u32 value) +{ + int i; + + for (i = 0; i < sz; i++) + if (table[i] == value) + return i; + return -EINVAL; +} + +/* IBB discharge resistor values in KOhms */ +static const int dischg_resistor_values[] = { 300, 64, 32, 16 }; + +/* Soft start time in microseconds */ +static const int soft_start_values[] = { 200, 400, 600, 800 }; + +static int qcom_labibb_of_parse_cb(struct device_node *np, + const struct regulator_desc *desc, + struct regulator_config *config) +{ + struct labibb_regulator *vreg = config->driver_data; + u32 dischg_kohms, soft_start_time; + int ret; + + ret = of_property_read_u32(np, "qcom,discharge-resistor-kohms", + &dischg_kohms); + if (ret) + dischg_kohms = 300; + + ret = qcom_labibb_get_table_sel(dischg_resistor_values, + ARRAY_SIZE(dischg_resistor_values), + dischg_kohms); + if (ret < 0) + return ret; + vreg->dischg_sel = (u8)ret; + + ret = of_property_read_u32(np, "qcom,soft-start-us", + &soft_start_time); + if (ret) + soft_start_time = 200; + + ret = qcom_labibb_get_table_sel(soft_start_values, + ARRAY_SIZE(soft_start_values), + soft_start_time); + if (ret < 0) + return ret; + vreg->soft_start_sel = (u8)ret; + + return 0; +} + static const struct regulator_ops qcom_labibb_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, @@ -128,8 +205,11 @@ static const struct regulator_ops qcom_labibb_ops = { .get_voltage_sel = regulator_get_voltage_sel_regmap, .list_voltage = regulator_list_voltage_linear_range, .map_voltage = regulator_map_voltage_linear_range, + .set_active_discharge = regulator_set_active_discharge_regmap, + .set_pull_down = regulator_set_pull_down_regmap, .set_current_limit = qcom_labibb_set_current_limit, .get_current_limit = qcom_labibb_get_current_limit, + .set_soft_start = qcom_labibb_set_soft_start, }; static const struct regulator_desc pmi8998_lab_desc = { @@ -138,6 +218,10 @@ static const struct regulator_desc pmi8998_lab_desc = { .enable_val = LABIBB_CONTROL_ENABLE, .enable_time = LAB_ENABLE_TIME, .poll_enabled_time = LABIBB_POLL_ENABLED_TIME, + .soft_start_reg = (PMI8998_LAB_REG_BASE + REG_LABIBB_SOFT_START_CTL), + .pull_down_reg = (PMI8998_LAB_REG_BASE + REG_LABIBB_PD_CTL), + .pull_down_mask = LAB_PD_CTL_MASK, + .pull_down_val_on = LAB_PD_CTL_STRONG_PULL, .vsel_reg = (PMI8998_LAB_REG_BASE + REG_LABIBB_VOLTAGE), .vsel_mask = LAB_VOLTAGE_SET_MASK, .apply_reg = (PMI8998_LAB_REG_BASE + REG_LABIBB_VOLTAGE), @@ -154,6 +238,7 @@ static const struct regulator_desc pmi8998_lab_desc = { .n_linear_ranges = 1, .n_voltages = 16, .ops = &qcom_labibb_ops, + .of_parse_cb = qcom_labibb_of_parse_cb, }; static const struct regulator_desc pmi8998_ibb_desc = { @@ -162,6 +247,14 @@ static const struct regulator_desc pmi8998_ibb_desc = { .enable_val = LABIBB_CONTROL_ENABLE, .enable_time = IBB_ENABLE_TIME, .poll_enabled_time = LABIBB_POLL_ENABLED_TIME, + .soft_start_reg = (PMI8998_IBB_REG_BASE + REG_LABIBB_SOFT_START_CTL), + .active_discharge_off = 0, + .active_discharge_on = IBB_CTL_1_DISCHARGE_EN, + .active_discharge_mask = IBB_CTL_1_DISCHARGE_EN, + .active_discharge_reg = (PMI8998_IBB_REG_BASE + REG_IBB_PWRUP_PWRDN_CTL_1), + .pull_down_reg = (PMI8998_IBB_REG_BASE + REG_LABIBB_PD_CTL), + .pull_down_mask = IBB_PD_CTL_MASK, + .pull_down_val_on = IBB_PD_CTL_HALF_STRENGTH | IBB_PD_CTL_EN, .vsel_reg = (PMI8998_IBB_REG_BASE + REG_LABIBB_VOLTAGE), .vsel_mask = IBB_VOLTAGE_SET_MASK, .apply_reg = (PMI8998_IBB_REG_BASE + REG_LABIBB_VOLTAGE), @@ -178,6 +271,7 @@ static const struct regulator_desc pmi8998_ibb_desc = { .n_linear_ranges = 1, .n_voltages = 64, .ops = &qcom_labibb_ops, + .of_parse_cb = qcom_labibb_of_parse_cb, }; static const struct labibb_regulator_data pmi8998_labibb_data[] = {