@@ -183,7 +183,10 @@ static inline int gdsc_assert_reset(struct gdsc *sc)
static inline void gdsc_force_mem_on(struct gdsc *sc)
{
int i;
- u32 mask = RETAIN_MEM | RETAIN_PERIPH;
+ u32 mask = RETAIN_MEM;
+
+ if (!(sc->flags & NO_RET_PERIPH))
+ mask |= RETAIN_PERIPH;
for (i = 0; i < sc->cxc_count; i++)
regmap_update_bits(sc->regmap, sc->cxcs[i], mask, mask);
@@ -192,7 +195,10 @@ static inline void gdsc_force_mem_on(struct gdsc *sc)
static inline void gdsc_clear_mem_on(struct gdsc *sc)
{
int i;
- u32 mask = RETAIN_MEM | RETAIN_PERIPH;
+ u32 mask = RETAIN_MEM;
+
+ if (!(sc->flags & NO_RET_PERIPH))
+ mask |= RETAIN_PERIPH;
for (i = 0; i < sc->cxc_count; i++)
regmap_update_bits(sc->regmap, sc->cxcs[i], mask, 0);
@@ -42,7 +42,7 @@ struct gdsc {
#define PWRSTS_ON BIT(2)
#define PWRSTS_OFF_ON (PWRSTS_OFF | PWRSTS_ON)
#define PWRSTS_RET_ON (PWRSTS_RET | PWRSTS_ON)
- const u8 flags;
+ const u16 flags;
#define VOTABLE BIT(0)
#define CLAMP_IO BIT(1)
#define HW_CTRL BIT(2)
@@ -51,6 +51,7 @@ struct gdsc {
#define POLL_CFG_GDSCR BIT(5)
#define ALWAYS_ON BIT(6)
#define RETAIN_FF_ENABLE BIT(7)
+#define NO_RET_PERIPH BIT(8)
struct reset_controller_dev *rcdev;
unsigned int *resets;
unsigned int reset_count;
In some rare occasions, we want to only set the RETAIN_MEM bit, but not the RETAIN_PERIPH one: this is seen on at least SDM630/636/660's GPU-GX GDSC, where unsetting and setting back the RETAIN_PERIPH bit will generate chaos and panics during GPU suspend time (mainly, the chaos is unaligned access). For this reason, introduce a new NO_RET_PERIPH flag to the GDSC driver to address this corner case. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> --- drivers/clk/qcom/gdsc.c | 10 ++++++++-- drivers/clk/qcom/gdsc.h | 3 ++- 2 files changed, 10 insertions(+), 3 deletions(-)