new file mode 100644
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS)
+ Low Power Island (LPI) TLMM block
+
+maintainers:
+ - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+ This binding describes the Top Level Mode Multiplexer block found in the
+ LPASS LPI IP on most Qualcomm SoCs
+
+properties:
+ compatible:
+ const: qcom,sm8250-lpass-lpi-pinctrl
+
+ reg:
+ minItems: 2
+ maxItems: 2
+
+ clocks:
+ items:
+ - description: LPASS Core voting clock
+ - description: LPASS Audio voting clock
+
+ clock-names:
+ items:
+ - const: core
+ - const: audio
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description: Specifying the pin number and flags, as defined in
+ include/dt-bindings/gpio/gpio.h
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+ '-pins$':
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9])$"
+ minItems: 1
+ maxItems: 14
+
+ function:
+ enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws,
+ qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk,
+ dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data,
+ i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk,
+ dmic3_data, i2s2_data ]
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+ default: 2
+ description:
+ Selects the drive strength for the specified pins, in mA.
+
+ slew-rate:
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ 0: No adjustments
+ 1: Higher Slew rate (faster edges)
+ 2: Lower Slew rate (slower edges)
+ 3: Reserved (No adjustments)
+
+ bias-pull-down: true
+
+ bias-pull-up: true
+
+ bias-disable: true
+
+ output-high: true
+
+ output-low: true
+
+ required:
+ - pins
+ - function
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/sound/qcom,q6afe.h>
+ lpi_tlmm: pinctrl@33c0000 {
+ compatible = "qcom,sm8250-lpass-lpi-pinctrl";
+ reg = <0x33c0000 0x20000>,
+ <0x3550000 0x10000>;
+ clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "core", "audio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&lpi_tlmm 0 0 14>;
+ };