@@ -417,11 +417,6 @@ &smd_rpm_regulators {
vdd_l4_l5_l6-supply = <&pm8916_s4>;
vdd_l7-supply = <&pm8916_s4>;
- s1 {
- regulator-min-microvolt = <375000>;
- regulator-max-microvolt = <1562000>;
- };
-
s3 {
regulator-min-microvolt = <375000>;
regulator-max-microvolt = <1562000>;
@@ -445,11 +440,6 @@ l2 {
regulator-max-microvolt = <1200000>;
};
- l3 {
- regulator-min-microvolt = <375000>;
- regulator-max-microvolt = <1525000>;
- };
-
l4 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
@@ -98,11 +98,6 @@ &smd_rpm_regulators {
vdd_l4_l5_l6-supply = <&pm8916_s4>;
vdd_l7-supply = <&pm8916_s4>;
- s1 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1300000>;
- };
-
s3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1300000>;
@@ -123,11 +118,6 @@ l2 {
regulator-max-microvolt = <1200000>;
};
- l3 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1287500>;
- };
-
l4 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
@@ -50,13 +50,13 @@ &rpm_requests {
smd_rpm_regulators: pm8916-regulators {
compatible = "qcom,rpm-pm8916-regulators";
- pm8916_s1: s1 {};
+ /* pm8916_s1 is managed by rpmpd (MSM8916_VDDCX) */
pm8916_s3: s3 {};
pm8916_s4: s4 {};
pm8916_l1: l1 {};
pm8916_l2: l2 {};
- pm8916_l3: l3 {};
+ /* pm8916_l3 is managed by rpmpd (MSM8916_VDDMX) */
pm8916_l4: l4 {};
pm8916_l5: l5 {};
pm8916_l6: l6 {};
@@ -164,11 +164,6 @@ &smd_rpm_regulators {
vdd_l4_l5_l6-supply = <&pm8916_s4>;
vdd_l7-supply = <&pm8916_s4>;
- s1 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1300000>;
- };
-
s3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1300000>;
@@ -189,11 +184,6 @@ l2 {
regulator-max-microvolt = <1200000>;
};
- l3 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1287500>;
- };
-
l4 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
s1 (VDDCX) and l3 (VDDMX) are now managed by rpmpd as power domains. This allows us to vote for voltage corners instead of voting for raw voltages. But we cannot manage these as regulator and power domain at the same time: The votes by rpmpd would conflict with the ones from the regulator driver. All users of these regulators have been converted to power domains. Make sure that no new users are added by removing s1 and l3 from the regulator definitions. This also allows us to remove the arbitrary voltage constraints we have been using for these regulators. Not all of the voltages listed there would actually have been safe for the boards. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> --- arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 10 ---------- arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts | 10 ---------- arch/arm64/boot/dts/qcom/msm8916-pm8916.dtsi | 4 ++-- .../boot/dts/qcom/msm8916-samsung-a2015-common.dtsi | 10 ---------- 4 files changed, 2 insertions(+), 32 deletions(-)