@@ -560,6 +560,9 @@ void dw_pcie_setup(struct dw_pcie *pci)
dev_dbg(pci->dev, "iATU unroll: %s\n", pci->iatu_unroll_enabled ?
"enabled" : "disabled");
+ val = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL);
+ val &= ~PORT_LINK_FAST_LINK_MODE;
+ dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, val);
ret = of_property_read_u32(np, "num-lanes", &pci->num_lanes);
if (!pci->num_lanes) {
@@ -568,7 +571,7 @@ void dw_pcie_setup(struct dw_pcie *pci)
}
/* Set the number of lanes */
- val = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL);
+ val &= ~PORT_LINK_FAST_LINK_MODE;
val &= ~PORT_LINK_MODE_MASK;
switch (pci->num_lanes) {
case 1:
@@ -36,6 +36,7 @@
#define PCIE_PORT_LINK_CONTROL 0x710
#define PORT_LINK_DLL_LINK_EN BIT(5)
+#define PORT_LINK_FAST_LINK_MODE BIT(7)
#define PORT_LINK_MODE_MASK GENMASK(21, 16)
#define PORT_LINK_MODE(n) FIELD_PREP(PORT_LINK_MODE_MASK, n)
#define PORT_LINK_MODE_1_LANES PORT_LINK_MODE(0x1)
"Fast Link Mode" is a simulation environment speed up setting which should never be set and the default is not set. However some Amlogic platforms have it set (by firmware presumably). See commit 87dccf09323f ("PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link") for more information. Let's clear it in core DWC code so we can drop some vendor specific code. Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rob Herring <robh@kernel.org> --- drivers/pci/controller/dwc/pcie-designware.c | 5 ++++- drivers/pci/controller/dwc/pcie-designware.h | 1 + 2 files changed, 5 insertions(+), 1 deletion(-) -- 2.25.1