diff mbox series

[v2,01/13] clk: qcom: gcc: fix sm8150 GPU and NPU clocks

Message ID 20200629172049.30452-2-jonathan@marek.ca
State Superseded
Headers show
Series Enable GPU for SM8150 and SM8250 | expand

Commit Message

Jonathan Marek June 29, 2020, 5:20 p.m. UTC 
Fix the parents and set BRANCH_HALT_SKIP. From the downstream driver it
should be a 500us delay and not skip, however this matches what was done
for other clocks that had 500us delay in downstream.

Fixes: f73a4230d5bb ("clk: qcom: gcc: Add GPU and NPU clocks for SM8150")

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
 drivers/clk/qcom/gcc-sm8150.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/clk/qcom/gcc-sm8150.c b/drivers/clk/qcom/gcc-sm8150.c
index 72524cf11048..55e9d6d75a0c 100644
--- a/drivers/clk/qcom/gcc-sm8150.c
+++ b/drivers/clk/qcom/gcc-sm8150.c
@@ -1617,6 +1617,7 @@  static struct clk_branch gcc_gpu_cfg_ahb_clk = {
 };
 
 static struct clk_branch gcc_gpu_gpll0_clk_src = {
+	.halt_check = BRANCH_HALT_SKIP,
 	.clkr = {
 		.enable_reg = 0x52004,
 		.enable_mask = BIT(15),
@@ -1632,13 +1633,14 @@  static struct clk_branch gcc_gpu_gpll0_clk_src = {
 };
 
 static struct clk_branch gcc_gpu_gpll0_div_clk_src = {
+	.halt_check = BRANCH_HALT_SKIP,
 	.clkr = {
 		.enable_reg = 0x52004,
 		.enable_mask = BIT(16),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_gpu_gpll0_div_clk_src",
 			.parent_hws = (const struct clk_hw *[]){
-				&gcc_gpu_gpll0_clk_src.clkr.hw },
+				&gpll0_out_even.clkr.hw },
 			.num_parents = 1,
 			.flags = CLK_SET_RATE_PARENT,
 			.ops = &clk_branch2_ops,
@@ -1729,6 +1731,7 @@  static struct clk_branch gcc_npu_cfg_ahb_clk = {
 };
 
 static struct clk_branch gcc_npu_gpll0_clk_src = {
+	.halt_check = BRANCH_HALT_SKIP,
 	.clkr = {
 		.enable_reg = 0x52004,
 		.enable_mask = BIT(18),
@@ -1744,13 +1747,14 @@  static struct clk_branch gcc_npu_gpll0_clk_src = {
 };
 
 static struct clk_branch gcc_npu_gpll0_div_clk_src = {
+	.halt_check = BRANCH_HALT_SKIP,
 	.clkr = {
 		.enable_reg = 0x52004,
 		.enable_mask = BIT(19),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_npu_gpll0_div_clk_src",
 			.parent_hws = (const struct clk_hw *[]){
-				&gcc_npu_gpll0_clk_src.clkr.hw },
+				&gpll0_out_even.clkr.hw },
 			.num_parents = 1,
 			.flags = CLK_SET_RATE_PARENT,
 			.ops = &clk_branch2_ops,