diff mbox series

[4/4] driver: clk: Add msm8992 GCC Kconfig and Makefile entries

Message ID 20200531174612.260113-5-konradybcio@gmail.com
State New
Headers show
Series Add msm8992 GCC driver | expand

Commit Message

Konrad Dybcio May 31, 2020, 5:46 p.m. UTC
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
---
 drivers/clk/qcom/Kconfig  | 8 ++++++++
 drivers/clk/qcom/Makefile | 1 +
 2 files changed, 9 insertions(+)

Comments

Stephen Boyd May 31, 2020, 7:48 p.m. UTC | #1
Quoting Randy Dunlap (2020-05-31 10:50:26)
> On 5/31/20 10:46 AM, Konrad Dybcio wrote:
> > Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
> > ---
> >  drivers/clk/qcom/Kconfig  | 8 ++++++++
> >  drivers/clk/qcom/Makefile | 1 +
> >  2 files changed, 9 insertions(+)
> > 
> > diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> > index 11ec6f466467..d102b4015289 100644
> > --- a/drivers/clk/qcom/Kconfig
> > +++ b/drivers/clk/qcom/Kconfig
> > @@ -197,6 +197,14 @@ config MSM_MMCC_8974
> >         Say Y if you want to support multimedia devices such as display,
> >         graphics, video encode/decode, camera, etc.
> >  
> > +config MSM_GCC_8992
> > +     tristate "MSM8992 Global Clock Controller"
> > +     select QCOM_GDSC
> > +     help
> > +       Support for the global clock controller on msm8992 devices.
> > +       Say Y if you want to use peripheral devices such as UART, SPI,
> > +       i2c, USB, SD/eMMC, PCIe, etc.
> 
>           I2C
> please.

Also please put someone in the "To:" field of these emails.
diff mbox series

Patch

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 11ec6f466467..d102b4015289 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -197,6 +197,14 @@  config MSM_MMCC_8974
 	  Say Y if you want to support multimedia devices such as display,
 	  graphics, video encode/decode, camera, etc.
 
+config MSM_GCC_8992
+	tristate "MSM8992 Global Clock Controller"
+	select QCOM_GDSC
+	help
+	  Support for the global clock controller on msm8992 devices.
+	  Say Y if you want to use peripheral devices such as UART, SPI,
+	  i2c, USB, SD/eMMC, PCIe, etc.
+
 config MSM_GCC_8994
 	tristate "MSM8994 Global Clock Controller"
 	help
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 691efbf7e81f..4d931562c42f 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -30,6 +30,7 @@  obj-$(CONFIG_MSM_GCC_8660) += gcc-msm8660.o
 obj-$(CONFIG_MSM_GCC_8916) += gcc-msm8916.o
 obj-$(CONFIG_MSM_GCC_8960) += gcc-msm8960.o
 obj-$(CONFIG_MSM_GCC_8974) += gcc-msm8974.o
+obj-$(CONFIG_MSM_GCC_8992) += gcc-msm8992.o
 obj-$(CONFIG_MSM_GCC_8994) += gcc-msm8994.o
 obj-$(CONFIG_MSM_GCC_8996) += gcc-msm8996.o
 obj-$(CONFIG_MSM_LCC_8960) += lcc-msm8960.o