@@ -70,7 +70,8 @@ obj-$(CONFIG_USB_OHCI_HCD_DAVINCI) += ohci-da8xx.o
obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o
obj-$(CONFIG_USB_FHCI_HCD) += fhci.o
obj-$(CONFIG_USB_XHCI_HCD) += xhci-hcd.o
-obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o
+usb-xhci-pci-objs := xhci-pci.o xhci-pci-renesas.o
+obj-$(CONFIG_USB_XHCI_PCI) += usb-xhci-pci.o
obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o
obj-$(CONFIG_USB_XHCI_HISTB) += xhci-histb.o
obj-$(CONFIG_USB_XHCI_MTK) += xhci-mtk.o
new file mode 100644
@@ -0,0 +1,431 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (C) 2019-2020 Linaro Limited */
+
+#include <linux/acpi.h>
+#include <linux/firmware.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/unaligned/access_ok.h>
+
+#include "xhci.h"
+#include "xhci-trace.h"
+#include "xhci-pci.h"
+
+#define RENESAS_FW_VERSION 0x6C
+#define RENESAS_ROM_CONFIG 0xF0
+#define RENESAS_FW_STATUS 0xF4
+#define RENESAS_FW_STATUS_MSB 0xF5
+#define RENESAS_ROM_STATUS 0xF6
+#define RENESAS_ROM_STATUS_MSB 0xF7
+#define RENESAS_DATA0 0xF8
+#define RENESAS_DATA1 0xFC
+
+#define RENESAS_FW_VERSION_FIELD GENMASK(23, 7)
+#define RENESAS_FW_VERSION_OFFSET 8
+
+#define RENESAS_FW_STATUS_DOWNLOAD_ENABLE BIT(0)
+#define RENESAS_FW_STATUS_LOCK BIT(1)
+#define RENESAS_FW_STATUS_RESULT GENMASK(6, 4)
+ #define RENESAS_FW_STATUS_INVALID 0
+ #define RENESAS_FW_STATUS_SUCCESS BIT(4)
+ #define RENESAS_FW_STATUS_ERROR BIT(5)
+#define RENESAS_FW_STATUS_SET_DATA0 BIT(8)
+#define RENESAS_FW_STATUS_SET_DATA1 BIT(9)
+
+#define RENESAS_ROM_STATUS_ACCESS BIT(0)
+#define RENESAS_ROM_STATUS_ERASE BIT(1)
+#define RENESAS_ROM_STATUS_RELOAD BIT(2)
+#define RENESAS_ROM_STATUS_RESULT GENMASK(6, 4)
+ #define RENESAS_ROM_STATUS_NO_RESULT 0
+ #define RENESAS_ROM_STATUS_SUCCESS BIT(4)
+ #define RENESAS_ROM_STATUS_ERROR BIT(5)
+#define RENESAS_ROM_STATUS_SET_DATA0 BIT(8)
+#define RENESAS_ROM_STATUS_SET_DATA1 BIT(9)
+#define RENESAS_ROM_STATUS_ROM_EXISTS BIT(15)
+
+#define RENESAS_ROM_ERASE_MAGIC 0x5A65726F
+#define RENESAS_ROM_WRITE_MAGIC 0x53524F4D
+
+#define RENESAS_RETRY 10000
+#define RENESAS_DELAY 10
+
+static int renesas_fw_download_image(struct pci_dev *dev,
+ const u32 *fw,
+ size_t step)
+{
+ size_t i;
+ int err;
+ u8 fw_status;
+ bool data0_or_data1;
+
+ /*
+ * The hardware does alternate between two 32-bit pages.
+ * (This is because each row of the firmware is 8 bytes).
+ *
+ * for even steps we use DATA0, for odd steps DATA1.
+ */
+ data0_or_data1 = (step & 1) == 1;
+
+ /* step+1. Read "Set DATAX" and confirm it is cleared. */
+ for (i = 0; i < RENESAS_RETRY; i++) {
+ err = pci_read_config_byte(dev, RENESAS_FW_STATUS_MSB,
+ &fw_status);
+ if (err)
+ return pcibios_err_to_errno(err);
+ if (!(fw_status & BIT(data0_or_data1)))
+ break;
+
+ udelay(RENESAS_DELAY);
+ }
+ if (i == RENESAS_RETRY) {
+ dev_err(&dev->dev, "FW Load timedout");
+ return -ETIMEDOUT;
+ }
+
+ /*
+ * step+2. Write FW data to "DATAX".
+ * "LSB is left" => force little endian
+ */
+ err = pci_write_config_dword(dev, data0_or_data1 ?
+ RENESAS_DATA1 : RENESAS_DATA0,
+ (__force u32)cpu_to_le32(fw[step]));
+ if (err)
+ return pcibios_err_to_errno(err);
+
+ udelay(100);
+
+ /* step+3. Set "Set DATAX". */
+ err = pci_write_config_byte(dev, RENESAS_FW_STATUS_MSB,
+ BIT(data0_or_data1));
+ if (err)
+ return pcibios_err_to_errno(err);
+
+ return 0;
+}
+
+static int renesas_fw_verify(struct pci_dev *dev,
+ const void *fw_data,
+ size_t length)
+{
+ u16 fw_version_pointer;
+ u16 fw_version;
+
+ /*
+ * The Firmware's Data Format is describe in
+ * "6.3 Data Format" R19UH0078EJ0500 Rev.5.00 page 124
+ */
+
+ /*
+ * The bootrom chips of the big brother have sizes up to 64k, let's
+ * assume that's the biggest the firmware can get.
+ */
+ if (length < 0x1000 || length >= 0x10000) {
+ dev_err(&dev->dev, "firmware is size %zd is not (4k - 64k).",
+ length);
+ return -EINVAL;
+ }
+
+ /* The First 2 bytes are fixed value (55aa). "LSB on Left" */
+ if (get_unaligned_le16(fw_data) != 0x55aa) {
+ dev_err(&dev->dev, "no valid firmware header found.");
+ return -EINVAL;
+ }
+
+ /* verify the firmware version position and print it. */
+ fw_version_pointer = get_unaligned_le16(fw_data + 4);
+ if (fw_version_pointer + 2 >= length) {
+ dev_err(&dev->dev,
+ "firmware version pointer is outside of the firmware image.");
+ return -EINVAL;
+ }
+
+ fw_version = get_unaligned_le16(fw_data + fw_version_pointer);
+ dev_dbg(&dev->dev, "got firmware version: %02x.", fw_version);
+
+ return 0;
+}
+
+static int renesas_fw_check_running(struct pci_dev *pdev)
+{
+ int err;
+ u8 fw_state;
+
+ /*
+ * Test if the device is actually needing the firmware. As most
+ * BIOSes will initialize the device for us. If the device is
+ * initialized.
+ */
+ err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_state);
+ if (err)
+ return pcibios_err_to_errno(err);
+
+ /*
+ * Check if "FW Download Lock" is locked. If it is and the FW is
+ * ready we can simply continue. If the FW is not ready, we have
+ * to give up.
+ */
+ if (fw_state & RENESAS_FW_STATUS_LOCK) {
+ dev_dbg(&pdev->dev, "FW Download Lock is engaged.");
+
+ if (fw_state & RENESAS_FW_STATUS_SUCCESS)
+ return 0;
+
+ dev_err(&pdev->dev,
+ "FW Download Lock is set and FW is not ready. Giving Up.");
+ return -EIO;
+ }
+
+ /*
+ * Check if "FW Download Enable" is set. If someone (us?) tampered
+ * with it and it can't be reset, we have to give up too... and
+ * ask for a forgiveness and a reboot.
+ */
+ if (fw_state & RENESAS_FW_STATUS_DOWNLOAD_ENABLE) {
+ dev_err(&pdev->dev,
+ "FW Download Enable is stale. Giving Up (poweroff/reboot needed).");
+ return -EIO;
+ }
+
+ /* Otherwise, Check the "Result Code" Bits (6:4) and act accordingly */
+ switch (fw_state & RENESAS_FW_STATUS_RESULT) {
+ case 0: /* No result yet */
+ dev_dbg(&pdev->dev, "FW is not ready/loaded yet.");
+
+ /* tell the caller, that this device needs the firmware. */
+ return 1;
+
+ case RENESAS_FW_STATUS_SUCCESS: /* Success, device should be working. */
+ dev_dbg(&pdev->dev, "FW is ready.");
+ return 0;
+
+ case RENESAS_FW_STATUS_ERROR: /* Error State */
+ dev_err(&pdev->dev,
+ "hardware is in an error state. Giving up (poweroff/reboot needed).");
+ return -ENODEV;
+
+ default: /* All other states are marked as "Reserved states" */
+ dev_err(&pdev->dev,
+ "hardware is in an invalid state %lx. Giving up (poweroff/reboot needed).",
+ (fw_state & RENESAS_FW_STATUS_RESULT) >> 4);
+ return -EINVAL;
+ }
+}
+
+static int renesas_fw_download(struct pci_dev *pdev,
+ const struct firmware *fw)
+{
+ const u32 *fw_data = (const u32 *)fw->data;
+ size_t i;
+ int err;
+ u8 fw_status;
+
+ /*
+ * For more information and the big picture: please look at the
+ * "Firmware Download Sequence" in "7.1 FW Download Interface"
+ * of R19UH0078EJ0500 Rev.5.00 page 131
+ */
+
+ /*
+ * 0. Set "FW Download Enable" bit in the
+ * "FW Download Control & Status Register" at 0xF4
+ */
+ err = pci_write_config_byte(pdev, RENESAS_FW_STATUS,
+ RENESAS_FW_STATUS_DOWNLOAD_ENABLE);
+ if (err)
+ return pcibios_err_to_errno(err);
+
+ /* 1 - 10 follow one step after the other. */
+ for (i = 0; i < fw->size / 4; i++) {
+ err = renesas_fw_download_image(pdev, fw_data, i);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Firmware Download Step %zd failed at position %zd bytes with (%d).",
+ i, i * 4, err);
+ return err;
+ }
+ }
+
+ /*
+ * This sequence continues until the last data is written to
+ * "DATA0" or "DATA1". Naturally, we wait until "SET DATA0/1"
+ * is cleared by the hardware beforehand.
+ */
+ for (i = 0; i < RENESAS_RETRY; i++) {
+ err = pci_read_config_byte(pdev, RENESAS_FW_STATUS_MSB,
+ &fw_status);
+ if (err)
+ return pcibios_err_to_errno(err);
+ if (!(fw_status & (BIT(0) | BIT(1))))
+ break;
+
+ udelay(RENESAS_DELAY);
+ }
+ if (i == RENESAS_RETRY)
+ dev_warn(&pdev->dev, "Final Firmware Download step timed out.");
+
+ /*
+ * 11. After finishing writing the last data of FW, the
+ * System Software must clear "FW Download Enable"
+ */
+ err = pci_write_config_byte(pdev, RENESAS_FW_STATUS, 0);
+ if (err)
+ return pcibios_err_to_errno(err);
+
+ /* 12. Read "Result Code" and confirm it is good. */
+ for (i = 0; i < RENESAS_RETRY; i++) {
+ err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_status);
+ if (err)
+ return pcibios_err_to_errno(err);
+ if (fw_status & RENESAS_FW_STATUS_SUCCESS)
+ break;
+
+ udelay(RENESAS_DELAY);
+ }
+ if (i == RENESAS_RETRY) {
+ /* Timed out / Error - let's see if we can fix this */
+ err = renesas_fw_check_running(pdev);
+ switch (err) {
+ case 0: /*
+ * we shouldn't end up here.
+ * maybe it took a little bit longer.
+ * But all should be well?
+ */
+ break;
+
+ case 1: /* (No result yet! */
+ dev_err(&pdev->dev, "FW Load timedout");
+ return -ETIMEDOUT;
+
+ default:
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+struct renesas_fw_ctx {
+ struct pci_dev *pdev;
+ const struct pci_device_id *id;
+ bool resume;
+ const struct renesas_fw_entry *entry;
+};
+
+static void renesas_fw_callback(const struct firmware *fw,
+ void *context)
+{
+ struct renesas_fw_ctx *ctx = context;
+ struct pci_dev *pdev = ctx->pdev;
+ struct device *parent = pdev->dev.parent;
+ int err;
+
+ if (!fw) {
+ dev_err(&pdev->dev, "firmware failed to load\n");
+ goto cleanup;
+ }
+
+ err = renesas_fw_verify(pdev, fw->data, fw->size);
+ if (err)
+ goto cleanup;
+
+ err = renesas_fw_download(pdev, fw);
+ release_firmware(fw);
+ if (err) {
+ dev_err(&pdev->dev, "firmware failed to download (%d).", err);
+ goto cleanup;
+ }
+
+ return;
+
+cleanup:
+ /* in case of an error - fall through */
+ dev_info(&pdev->dev, "Unloading driver");
+
+ if (parent)
+ device_lock(parent);
+
+ device_release_driver(&pdev->dev);
+
+ if (parent)
+ device_unlock(parent);
+
+ pci_dev_put(pdev);
+}
+
+static int renesas_fw_download_to_hw(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct renesas_fw_ctx *ctx;
+ char *fw_name = (char *)id->driver_data;
+ int err;
+
+ err = renesas_fw_check_running(pdev);
+ /* Continue ahead, if the firmware is already running. */
+ if (err == 0)
+ return 0;
+
+ if (err != 1)
+ return err;
+
+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+ ctx->pdev = pdev;
+ ctx->id = id;
+
+ pci_dev_get(pdev);
+ err = request_firmware_nowait(THIS_MODULE, 1, fw_name,
+ &pdev->dev, GFP_KERNEL,
+ ctx, renesas_fw_callback);
+ if (err) {
+ dev_err(&pdev->dev, "request_firmware failed: %d\n", err);
+ pci_dev_put(pdev);
+ return err;
+ }
+
+ /*
+ * The renesas_fw_callback() callback will continue the probe
+ * process, once it acquires the firmware.
+ */
+ return 1;
+}
+
+int renesas_xhci_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ int retval;
+
+ /*
+ * Check if this device is a RENESAS uPD720201/2 device.
+ * Otherwise, we can continue with xhci_pci_probe as usual.
+ */
+ retval = renesas_fw_download_to_hw(dev, id);
+ switch (retval) {
+ case 0:
+ break;
+
+ case 1: /* let it load the firmware and recontinue the probe. */
+ retval = 1;
+ break;
+
+ default:
+ break;
+ };
+
+ return retval;
+}
+
+int renesas_xhci_pci_remove(struct pci_dev *dev)
+{
+ if (renesas_fw_check_running(dev)) {
+ /*
+ * bail out early, if this was a renesas device w/o FW.
+ * Else we might hit the NMI watchdog in xhci_handsake
+ * during xhci_reset as part of the driver's unloading.
+ * which we forced in the renesas_fw_callback().
+ */
+ return -EIO;
+ }
+ return 0;
+}
new file mode 100644
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (C) 2019-2020 Linaro Limited */
+
+#ifndef XHCI_PCI_H
+#define XHCI_PCI_H
+
+int renesas_xhci_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id);
+int renesas_xhci_pci_remove(struct pci_dev *dev);
+#endif
+