diff mbox series

[v4,6/6] input: pm8941-pwrkey: Add resin entry

Message ID 20180627115301.21330-7-vkoul@kernel.org
State New
Headers show
Series [v4,1/6] dt-bindings: power: reset: Add qcom pon binding | expand

Commit Message

Vinod Koul June 27, 2018, 11:53 a.m. UTC 
Since handling is abstracted in this driver, we need to add resin entry
in id table along with pwrkey_data.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Signed-off-by: Vinod Koul <vkoul@kernel.org>

---
 drivers/input/misc/pm8941-pwrkey.c | 8 ++++++++
 1 file changed, 8 insertions(+)

-- 
2.14.4

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c
index 2047e34c0982..6547a57f5222 100644
--- a/drivers/input/misc/pm8941-pwrkey.c
+++ b/drivers/input/misc/pm8941-pwrkey.c
@@ -29,6 +29,7 @@ 
 
 #define PON_RT_STS			0x10
 #define  PON_KPDPWR_N_SET		BIT(0)
+#define  PON_RESIN_N_SET		BIT(1)
 
 #define PON_PS_HOLD_RST_CTL		0x5a
 #define PON_PS_HOLD_RST_CTL2		0x5b
@@ -39,6 +40,7 @@ 
 
 #define PON_PULL_CTL			0x70
 #define  PON_KPDPWR_PULL_UP		BIT(1)
+#define  PON_RESIN_PULL_UP		BIT(0)
 
 #define PON_DBC_CTL			0x71
 #define  PON_DBC_DELAY_MASK		0x7
@@ -306,8 +308,14 @@  static const struct pm8941_data pwrkey_data = {
 	.status_bit = PON_KPDPWR_N_SET,
 };
 
+static const struct pm8941_data resin_data = {
+	.pull_up_bit = PON_RESIN_PULL_UP,
+	.status_bit = PON_RESIN_N_SET,
+};
+
 static const struct of_device_id pm8941_pwr_key_id_table[] = {
 	{ .compatible = "qcom,pm8941-pwrkey", .data = &pwrkey_data },
+	{ .compatible = "qcom,pm8941-resin", .data = &resin_data },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, pm8941_pwr_key_id_table);