From patchwork Wed Sep 7 21:35:18 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Stephen Boyd X-Patchwork-Id: 75698 Delivered-To: patch@linaro.org Received: by 10.140.106.11 with SMTP id d11csp526175qgf; Wed, 7 Sep 2016 14:36:35 -0700 (PDT) X-Received: by 10.66.135.175 with SMTP id pt15mr22763581pab.134.1473284195234; Wed, 07 Sep 2016 14:36:35 -0700 (PDT) Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id j12si24690041pfa.148.2016.09.07.14.36.34; Wed, 07 Sep 2016 14:36:35 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-arm-msm-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=neutral (body hash did not verify) header.i=@linaro.org; spf=pass (google.com: best guess record for domain of linux-arm-msm-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-arm-msm-owner@vger.kernel.org; dmarc=fail (p=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757283AbcIGVgc (ORCPT + 8 others); Wed, 7 Sep 2016 17:36:32 -0400 Received: from mail-pa0-f45.google.com ([209.85.220.45]:33389 "EHLO mail-pa0-f45.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932687AbcIGVfx (ORCPT ); Wed, 7 Sep 2016 17:35:53 -0400 Received: by mail-pa0-f45.google.com with SMTP id cm16so9992268pac.0 for ; Wed, 07 Sep 2016 14:35:53 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=IFWZgfXbc0Q9uorgrzprrLB+9mvlkael3IsRdss5UeY=; b=N3/TIWf1lahs33kf7ThzpbveID2nyzgY4BlAF4APmiAgz8EUQryeqMz9Ljc5ZpsGje E42X0iLFVyYBurvAHmqlO2PI0KsHlu7ja8EnOgDU/XABum3tcIzeGQCg2t+cIACLdQ4O HX7tMKQqwzA9hWs4wg5mWur/zrllxbz7Vlk6k= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=IFWZgfXbc0Q9uorgrzprrLB+9mvlkael3IsRdss5UeY=; b=C/9pWW727f5tKSjzOBazFMxDSiB7/MUQsWAPqcGQlGr07Sr5iToWUEczvlLWHaM+de sJoKY+Jx4I4INLAouTOR77vg5D5QCRtdu9UYx+18VE3+hEpe3tsrY3XJDrR4hYDCBmii byUDYwLVlezda1xA6JEVSeOmL9gCnh2h5JmgLMMHWam0ZjawUoOo2tfxt3meDt5sODjV MQbF/0oQkoxDLnWx6Dcd7IKb8mkZBc6NPSAfejgBBxPnS0rHsl+PKZiO9ttHwgU6lHQn j4BtNuh72QdwCiJ5W9LLTNWDcKguULpOCvULgLS2TUP1R0x8DJBbeAO3igbaLFBTgIBk CusA== X-Gm-Message-State: AE9vXwPMcXyb8mCyRb793OfqOHmOjgLtzMiQkucpnyBkJ+ChCxdjKwCZzceqWgEygIqhkDlN X-Received: by 10.66.147.234 with SMTP id tn10mr87351542pab.144.1473284147635; Wed, 07 Sep 2016 14:35:47 -0700 (PDT) Received: from localhost.localdomain (ip68-101-172-78.sd.sd.cox.net. [68.101.172.78]) by smtp.gmail.com with ESMTPSA id 75sm51015417pfw.92.2016.09.07.14.35.46 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Wed, 07 Sep 2016 14:35:47 -0700 (PDT) From: Stephen Boyd To: linux-usb@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, Andy Gross , Bjorn Andersson , Neil Armstrong , Arnd Bergmann , Felipe Balbi , Peter Chen , Kishon Vijay Abraham I , devicetree@vger.kernel.org Subject: [PATCH v4 21/22] phy: Add support for Qualcomm's USB HSIC phy Date: Wed, 7 Sep 2016 14:35:18 -0700 Message-Id: <20160907213519.27340-22-stephen.boyd@linaro.org> X-Mailer: git-send-email 2.9.0.rc2.8.ga28705d In-Reply-To: <20160907213519.27340-1-stephen.boyd@linaro.org> References: <20160907213519.27340-1-stephen.boyd@linaro.org> Sender: linux-arm-msm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org The HSIC USB controller on qcom SoCs has an integrated all digital phy controlled via the ULPI viewport. Cc: Kishon Vijay Abraham I Cc: Signed-off-by: Stephen Boyd --- .../devicetree/bindings/phy/qcom,usb-hsic-phy.txt | 65 +++++++++ drivers/phy/Kconfig | 7 + drivers/phy/Makefile | 1 + drivers/phy/phy-qcom-usb-hsic.c | 160 +++++++++++++++++++++ 4 files changed, 233 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.txt create mode 100644 drivers/phy/phy-qcom-usb-hsic.c -- 2.9.0.rc2.8.ga28705d -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.txt b/Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.txt new file mode 100644 index 000000000000..3c7cb2be4b12 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.txt @@ -0,0 +1,65 @@ +Qualcomm's USB HSIC PHY + +PROPERTIES + +- compatible: + Usage: required + Value type: + Definition: Should contain "qcom,usb-hsic-phy" and more specifically one of the + following: + + "qcom,usb-hsic-phy-mdm9615" + "qcom,usb-hsic-phy-msm8974" + +- #phy-cells: + Usage: required + Value type: + Definition: Should contain 0 + +- clocks: + Usage: required + Value type: + Definition: Should contain clock specifier for phy, calibration and + a calibration sleep clock + +- clock-names: + Usage: required + Value type: + Definition: Should contain "phy, "cal" and "cal_sleep" + +- pinctrl-names: + Usage: required + Value type: + Definition: Should contain "init" and "default" in that order + +- pinctrl-0: + Usage: required + Value type: + Definition: List of pinctrl settings to apply to keep HSIC pins in a glitch + free state + +- pinctrl-1: + Usage: required + Value type: + Definition: List of pinctrl settings to apply to mux out the HSIC pins + +EXAMPLE + +usb-controller { + ulpi { + phy { + compatible = "qcom,usb-hsic-phy-msm8974", + "qcom,usb-hsic-phy"; + #phy-cells = <0>; + pinctrl-names = "init", "default"; + pinctrl-0 = <&hsic_sleep>; + pinctrl-1 = <&hsic_default>; + clocks = <&gcc GCC_USB_HSIC_CLK>, + <&gcc GCC_USB_HSIC_IO_CAL_CLK>, + <&gcc GCC_USB_HSIC_IO_CAL_SLEEP_CLK>; + clock-names = "phy", "cal", "cal_sleep"; + assigned-clocks = <&gcc GCC_USB_HSIC_IO_CAL_CLK>; + assigned-clock-rates = <960000>; + }; + }; +}; diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 19bff3a10f69..830c443eeabf 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -417,6 +417,13 @@ config PHY_QCOM_UFS help Support for UFS PHY on QCOM chipsets. +config PHY_QCOM_USB_HSIC + tristate "Qualcomm USB HSIC ULPI PHY module" + depends on USB_ULPI_BUS + select GENERIC_PHY + help + Support for the USB HSIC ULPI compliant PHY on QCOM chipsets. + config PHY_TUSB1210 tristate "TI TUSB1210 ULPI PHY module" depends on USB_ULPI_BUS diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 90ae19879b0a..5422f543d17d 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -50,6 +50,7 @@ obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o +obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o diff --git a/drivers/phy/phy-qcom-usb-hsic.c b/drivers/phy/phy-qcom-usb-hsic.c new file mode 100644 index 000000000000..47690f9945b9 --- /dev/null +++ b/drivers/phy/phy-qcom-usb-hsic.c @@ -0,0 +1,160 @@ +/** + * Copyright (C) 2016 Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include + +#include "ulpi_phy.h" + +#define ULPI_HSIC_CFG 0x30 +#define ULPI_HSIC_IO_CAL 0x33 + +struct qcom_usb_hsic_phy { + struct ulpi *ulpi; + struct phy *phy; + struct pinctrl *pctl; + struct clk *phy_clk; + struct clk *cal_clk; + struct clk *cal_sleep_clk; +}; + +static int qcom_usb_hsic_phy_power_on(struct phy *phy) +{ + struct qcom_usb_hsic_phy *uphy = phy_get_drvdata(phy); + struct ulpi *ulpi = uphy->ulpi; + struct pinctrl_state *pins_default; + int ret; + + ret = clk_prepare_enable(uphy->phy_clk); + if (ret) + return ret; + + ret = clk_prepare_enable(uphy->cal_clk); + if (ret) + goto err_cal; + + ret = clk_prepare_enable(uphy->cal_sleep_clk); + if (ret) + goto err_sleep; + + /* Set periodic calibration interval to ~2.048sec in HSIC_IO_CAL_REG */ + ret = ulpi_write(ulpi, ULPI_HSIC_IO_CAL, 0xff); + if (ret) + goto err_ulpi; + + /* Enable periodic IO calibration in HSIC_CFG register */ + ret = ulpi_write(ulpi, ULPI_HSIC_CFG, 0xa8); + if (ret) + goto err_ulpi; + + /* Configure pins for HSIC functionality */ + pins_default = pinctrl_lookup_state(uphy->pctl, PINCTRL_STATE_DEFAULT); + if (IS_ERR(pins_default)) + return PTR_ERR(pins_default); + + ret = pinctrl_select_state(uphy->pctl, pins_default); + if (ret) + goto err_ulpi; + + /* Enable HSIC mode in HSIC_CFG register */ + ret = ulpi_write(ulpi, ULPI_SET(ULPI_HSIC_CFG), 0x01); + if (ret) + goto err_ulpi; + + /* Disable auto-resume */ + ret = ulpi_write(ulpi, ULPI_CLR(ULPI_IFC_CTRL), + ULPI_IFC_CTRL_AUTORESUME); + if (ret) + goto err_ulpi; + + return ret; +err_ulpi: + clk_disable_unprepare(uphy->cal_sleep_clk); +err_sleep: + clk_disable_unprepare(uphy->cal_clk); +err_cal: + clk_disable_unprepare(uphy->phy_clk); + return ret; +} + +static int qcom_usb_hsic_phy_power_off(struct phy *phy) +{ + struct qcom_usb_hsic_phy *uphy = phy_get_drvdata(phy); + + clk_disable_unprepare(uphy->cal_sleep_clk); + clk_disable_unprepare(uphy->cal_clk); + clk_disable_unprepare(uphy->phy_clk); + + return 0; +} + +static const struct phy_ops qcom_usb_hsic_phy_ops = { + .power_on = qcom_usb_hsic_phy_power_on, + .power_off = qcom_usb_hsic_phy_power_off, + .owner = THIS_MODULE, +}; + +static int qcom_usb_hsic_phy_probe(struct ulpi *ulpi) +{ + struct qcom_usb_hsic_phy *uphy; + struct phy_provider *p; + struct clk *clk; + + uphy = devm_kzalloc(&ulpi->dev, sizeof(*uphy), GFP_KERNEL); + if (!uphy) + return -ENOMEM; + ulpi_set_drvdata(ulpi, uphy); + + uphy->ulpi = ulpi; + uphy->pctl = devm_pinctrl_get(&ulpi->dev); + if (IS_ERR(uphy->pctl)) + return PTR_ERR(uphy->pctl); + + uphy->phy_clk = clk = devm_clk_get(&ulpi->dev, "phy"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + uphy->cal_clk = clk = devm_clk_get(&ulpi->dev, "cal"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + uphy->cal_sleep_clk = clk = devm_clk_get(&ulpi->dev, "cal_sleep"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + uphy->phy = devm_phy_create(&ulpi->dev, ulpi->dev.of_node, + &qcom_usb_hsic_phy_ops); + if (IS_ERR(uphy->phy)) + return PTR_ERR(uphy->phy); + phy_set_drvdata(uphy->phy, uphy); + + p = devm_of_phy_provider_register(&ulpi->dev, of_phy_simple_xlate); + return PTR_ERR_OR_ZERO(p); +} + +static const struct of_device_id qcom_usb_hsic_phy_match[] = { + { .compatible = "qcom,usb-hsic-phy", }, + { } +}; +MODULE_DEVICE_TABLE(of, qcom_usb_hsic_phy_match); + +static struct ulpi_driver qcom_usb_hsic_phy_driver = { + .probe = qcom_usb_hsic_phy_probe, + .driver = { + .name = "qcom_usb_hsic_phy", + .of_match_table = qcom_usb_hsic_phy_match, + }, +}; +module_ulpi_driver(qcom_usb_hsic_phy_driver); + +MODULE_DESCRIPTION("Qualcomm USB HSIC phy"); +MODULE_LICENSE("GPL v2");