| Message ID | 1695720564-2978-2-git-send-email-quic_rohiagar@quicinc.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add devicetree support of Interconnects and USB for SDX75 | expand |
Hi Rohit, kernel test robot noticed the following build errors: [auto build test ERROR on robh/for-next] [also build test ERROR on linus/master v6.6-rc3 next-20230929] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Rohit-Agarwal/arm64-dts-qcom-Add-interconnect-nodes-for-SDX75/20230926-173336 base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next patch link: https://lore.kernel.org/r/1695720564-2978-2-git-send-email-quic_rohiagar%40quicinc.com patch subject: [PATCH v2 1/3] arm64: dts: qcom: Add interconnect nodes for SDX75 config: arm64-randconfig-002-20230930 (https://download.01.org/0day-ci/archive/20231002/202310020405.aU033fMG-lkp@intel.com/config) compiler: aarch64-linux-gcc (GCC) 13.2.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231002/202310020405.aU033fMG-lkp@intel.com/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202310020405.aU033fMG-lkp@intel.com/ All errors (new ones prefixed by >>): In file included from arch/arm64/boot/dts/qcom/sdx75-idp.dts:9: >> arch/arm64/boot/dts/qcom/sdx75.dtsi:11:10: fatal error: dt-bindings/interconnect/qcom,sdx75.h: No such file or directory 11 | #include <dt-bindings/interconnect/qcom,sdx75.h> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. vim +11 arch/arm64/boot/dts/qcom/sdx75.dtsi > 11 #include <dt-bindings/interconnect/qcom,sdx75.h> 12 #include <dt-bindings/interrupt-controller/arm-gic.h> 13 #include <dt-bindings/power/qcom,rpmhpd.h> 14 #include <dt-bindings/power/qcom-rpmpd.h> 15 #include <dt-bindings/soc/qcom,rpmh-rsc.h> 16
On 9/27/2023 4:17 PM, Konrad Dybcio wrote: > On 26.09.2023 11:29, Rohit Agarwal wrote: >> Add interconnect nodes to support interconnects on SDX75. >> Also parallely add the interconnect property for UART required >> so that the bootup to shell does not break with interconnects >> in place. >> >> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> >> --- > [...] > >> scm: scm { >> compatible = "qcom,scm-sdx75", "qcom,scm"; >> @@ -434,6 +448,8 @@ >> clock-names = "m-ahb", >> "s-ahb"; >> iommus = <&apps_smmu 0xe3 0x0>; >> + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>; > 0 -> QCOM_ICC_TAG_ALWAYS (dt-bindings/interconnect/qcom,icc.h) Ok, Let me update this. Thanks, Rohit. > > Konrad
diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi index e180aa4..dd3a525 100644 --- a/arch/arm64/boot/dts/qcom/sdx75.dtsi +++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,sdx75-gcc.h> +#include <dt-bindings/interconnect/qcom,sdx75.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom,rpmhpd.h> #include <dt-bindings/power/qcom-rpmpd.h> @@ -197,6 +198,19 @@ }; }; + clk_virt: interconnect-0 { + compatible = "qcom,sdx75-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&rpmhcc RPMH_QPIC_CLK>; + }; + + mc_virt: interconnect-1 { + compatible = "qcom,sdx75-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + firmware { scm: scm { compatible = "qcom,scm-sdx75", "qcom,scm"; @@ -434,6 +448,8 @@ clock-names = "m-ahb", "s-ahb"; iommus = <&apps_smmu 0xe3 0x0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>; + interconnect-names = "qup-core"; #address-cells = <2>; #size-cells = <2>; ranges; @@ -444,6 +460,10 @@ reg = <0x0 0x00984000 0x0 0x4000>; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &system_noc SLAVE_QUP_0 0>; + interconnect-names = "qup-core", + "qup-config"; interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>; pinctrl-0 = <&qupv3_se1_2uart_active>; pinctrl-1 = <&qupv3_se1_2uart_sleep>; @@ -453,6 +473,20 @@ }; }; + system_noc: interconnect@1640000 { + compatible = "qcom,sdx75-system-noc"; + reg = <0x0 0x01640000 0x0 0x4b400>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pcie_anoc: interconnect@16c0000 { + compatible = "qcom,sdx75-pcie-anoc"; + reg = <0x0 0x016c0000 0x0 0x14200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x40000>; @@ -733,6 +767,20 @@ #freq-domain-cells = <1>; #clock-cells = <1>; }; + + dc_noc: interconnect@190e0000 { + compatible = "qcom,sdx75-dc-noc"; + reg = <0x0 0x190e0000 0x0 0x8200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect@19100000 { + compatible = "qcom,sdx75-gem-noc"; + reg = <0x0 0x19100000 0x0 0x34080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; }; timer {
Add interconnect nodes to support interconnects on SDX75. Also parallely add the interconnect property for UART required so that the bootup to shell does not break with interconnects in place. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> --- arch/arm64/boot/dts/qcom/sdx75.dtsi | 48 +++++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+)