@@ -93,6 +93,29 @@ soc: soc@0 {
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
+ qfprom_nvmem: qfprom_nvmem@a0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "qcom,ipq5018-qfprom", "qcom,qfprom";
+ reg = <0xa0000 0x1000>;
+
+ tsens_calib: calib@248 {
+ reg = <0x248 0x10>;
+ };
+ };
+
+ tsens: thermal-sensor@4a9000 {
+ compatible = "qcom,ipq5018-tsens", "qcom,tsens-v1";
+ reg = <0x4a9000 0x1000>, /* TM */
+ <0x4a8000 0x1000>; /* SORT */
+ nvmem-cells = <&tsens_calib>;
+ nvmem-cell-names = "calib";
+ interrupts = <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "uplow";
+ #qcom,sensors = <5>;
+ #thermal-sensor-cells = <1>;
+ };
+
tlmm: pinctrl@1000000 {
compatible = "qcom,ipq5018-tlmm";
reg = <0x01000000 0x300000>;
IPQ5018 has tsens V1.0 IP with 4 sensors. There is no RPM, so tsens has to manually enabled. Adding the tsens and nvmem node. Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> --- arch/arm64/boot/dts/qcom/ipq5018.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)