diff mbox series

[v3,3/8] accel/qaic: Add MHI controller

Message ID 1678138443-2760-4-git-send-email-quic_jhugo@quicinc.com
State Superseded
Headers show
Series QAIC accel driver | expand

Commit Message

Jeffrey Hugo March 6, 2023, 9:33 p.m. UTC 
An AIC100 device contains a MHI interface with a number of different
channels for controlling different aspects of the device. The MHI
controller works with the MHI bus to enable and drive that interface.

AIC100 uses the BHI protocol in PBL to load SBL. The MHI controller
expects the SBL to be located at /lib/firmware/qcom/aic100/sbl.bin and
expects the MHI bus to manage the process of loading and sending SBL to
the device.

Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
---
 drivers/accel/qaic/mhi_controller.c | 563 ++++++++++++++++++++++++++++++++++++
 drivers/accel/qaic/mhi_controller.h |  16 +
 2 files changed, 579 insertions(+)
 create mode 100644 drivers/accel/qaic/mhi_controller.c
 create mode 100644 drivers/accel/qaic/mhi_controller.h

Comments

Jacek Lawrynowicz March 13, 2023, 1:39 p.m. UTC | #1 
Hi,

On 06.03.2023 22:33, Jeffrey Hugo wrote:
> An AIC100 device contains a MHI interface with a number of different
> channels for controlling different aspects of the device. The MHI
> controller works with the MHI bus to enable and drive that interface.
> 
> AIC100 uses the BHI protocol in PBL to load SBL. The MHI controller
> expects the SBL to be located at /lib/firmware/qcom/aic100/sbl.bin and
> expects the MHI bus to manage the process of loading and sending SBL to
> the device.
> 
> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
> ---
>  drivers/accel/qaic/mhi_controller.c | 563 ++++++++++++++++++++++++++++++++++++
>  drivers/accel/qaic/mhi_controller.h |  16 +
>  2 files changed, 579 insertions(+)
>  create mode 100644 drivers/accel/qaic/mhi_controller.c
>  create mode 100644 drivers/accel/qaic/mhi_controller.h
> 
> diff --git a/drivers/accel/qaic/mhi_controller.c b/drivers/accel/qaic/mhi_controller.c
> new file mode 100644
> index 0000000..f16dbb7
> --- /dev/null
> +++ b/drivers/accel/qaic/mhi_controller.c
> @@ -0,0 +1,563 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +/* Copyright (c) 2019-2021, The Linux Foundation. All rights reserved. */
> +/* Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved. */
> +
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/memblock.h>
> +#include <linux/mhi.h>
> +#include <linux/moduleparam.h>
> +#include <linux/pci.h>
> +#include <linux/sizes.h>
> +
> +#include "mhi_controller.h"
> +#include "qaic.h"
> +
> +#define MAX_RESET_TIME_SEC 25
> +
> +static unsigned int mhi_timeout = 2000; /* 2 sec default */
> +module_param(mhi_timeout, uint, 0600);

Consider documenting the param with MODULE_PARM_DESC() and adding _ms postfix to
indicate that time units it is using.

> +
> +static struct mhi_channel_config aic100_channels[] = {
> +	{
> +		.name = "QAIC_LOOPBACK",
> +		.num = 0,
> +		.num_elements = 32,
> +		.local_elements = 0,
> +		.event_ring = 0,
> +		.dir = DMA_TO_DEVICE,
> +		.ee_mask = MHI_CH_EE_AMSS,
> +		.pollcfg = 0,
> +		.doorbell = MHI_DB_BRST_DISABLE,
> +		.lpm_notify = false,
> +		.offload_channel = false,
> +		.doorbell_mode_switch = false,
> +		.auto_queue = false,
> +		.wake_capable = false,
> +	},
> +	{
> +		.name = "QAIC_LOOPBACK",
> +		.num = 1,
> +		.num_elements = 32,
> +		.local_elements = 0,
> +		.event_ring = 0,
> +		.dir = DMA_FROM_DEVICE,
> +		.ee_mask = MHI_CH_EE_AMSS,
> +		.pollcfg = 0,
> +		.doorbell = MHI_DB_BRST_DISABLE,
> +		.lpm_notify = false,
> +		.offload_channel = false,
> +		.doorbell_mode_switch = false,
> +		.auto_queue = false,
> +		.wake_capable = false,
> +	},
> +	{
> +		.name = "QAIC_SAHARA",
> +		.num = 2,
> +		.num_elements = 32,
> +		.local_elements = 0,
> +		.event_ring = 0,
> +		.dir = DMA_TO_DEVICE,
> +		.ee_mask = MHI_CH_EE_SBL,
> +		.pollcfg = 0,
> +		.doorbell = MHI_DB_BRST_DISABLE,
> +		.lpm_notify = false,
> +		.offload_channel = false,
> +		.doorbell_mode_switch = false,
> +		.auto_queue = false,
> +		.wake_capable = false,
> +	},
> +	{
> +		.name = "QAIC_SAHARA",
> +		.num = 3,
> +		.num_elements = 32,
> +		.local_elements = 0,
> +		.event_ring = 0,
> +		.dir = DMA_FROM_DEVICE,
> +		.ee_mask = MHI_CH_EE_SBL,
> +		.pollcfg = 0,
> +		.doorbell = MHI_DB_BRST_DISABLE,
> +		.lpm_notify = false,
> +		.offload_channel = false,
> +		.doorbell_mode_switch = false,
> +		.auto_queue = false,
> +		.wake_capable = false,
> +	},
> +	{
> +		.name = "QAIC_DIAG",
> +		.num = 4,
> +		.num_elements = 32,
> +		.local_elements = 0,
> +		.event_ring = 0,
> +		.dir = DMA_TO_DEVICE,
> +		.ee_mask = MHI_CH_EE_AMSS,
> +		.pollcfg = 0,
> +		.doorbell = MHI_DB_BRST_DISABLE,
> +		.lpm_notify = false,
> +		.offload_channel = false,
> +		.doorbell_mode_switch = false,
> +		.auto_queue = false,
> +		.wake_capable = false,
> +	},
> +	{
> +		.name = "QAIC_DIAG",
> +		.num = 5,
> +		.num_elements = 32,
> +		.local_elements = 0,
> +		.event_ring = 0,
> +		.dir = DMA_FROM_DEVICE,
> +		.ee_mask = MHI_CH_EE_AMSS,
> +		.pollcfg = 0,
> +		.doorbell = MHI_DB_BRST_DISABLE,
> +		.lpm_notify = false,
> +		.offload_channel = false,
> +		.doorbell_mode_switch = false,
> +		.auto_queue = false,
> +		.wake_capable = false,
> +	},
> +	{
> +		.name = "QAIC_SSR",
> +		.num = 6,
> +		.num_elements = 32,
> +		.local_elements = 0,
> +		.event_ring = 0,
> +		.dir = DMA_TO_DEVICE,
> +		.ee_mask = MHI_CH_EE_AMSS,
> +		.pollcfg = 0,
> +		.doorbell = MHI_DB_BRST_DISABLE,
> +		.lpm_notify = false,
> +		.offload_channel = false,
> +		.doorbell_mode_switch = false,
> +		.auto_queue = false,
> +		.wake_capable = false,
> +	},
> +	{
> +		.name = "QAIC_SSR",
> +		.num = 7,
> +		.num_elements = 32,
> +		.local_elements = 0,
> +		.event_ring = 0,
> +		.dir = DMA_FROM_DEVICE,
> +		.ee_mask = MHI_CH_EE_AMSS,
> +		.pollcfg = 0,
> +		.doorbell = MHI_DB_BRST_DISABLE,
> +		.lpm_notify = false,
> +		.offload_channel = false,
> +		.doorbell_mode_switch = false,
> +		.auto_queue = false,
> +		.wake_capable = false,
> +	},
> +	{
> +		.name = "QAIC_QDSS",
> +		.num = 8,
> +		.num_elements = 32,
> +		.local_elements = 0,
> +		.event_ring = 0,
> +		.dir = DMA_TO_DEVICE,
> +		.ee_mask = MHI_CH_EE_AMSS,
> +		.pollcfg = 0,
> +		.doorbell = MHI_DB_BRST_DISABLE,
> +		.lpm_notify = false,
> +		.offload_channel = false,
> +		.doorbell_mode_switch = false,
> +		.auto_queue = false,
> +		.wake_capable = false,
> +	},
> +	{
> +		.name = "QAIC_QDSS",
> +		.num = 9,
> +		.num_elements = 32,
> +		.local_elements = 0,
> +		.event_ring = 0,
> +		.dir = DMA_FROM_DEVICE,
> +		.ee_mask = MHI_CH_EE_AMSS,
> +		.pollcfg = 0,
> +		.doorbell = MHI_DB_BRST_DISABLE,
> +		.lpm_notify = false,
> +		.offload_channel = false,
> +		.doorbell_mode_switch = false,
> +		.auto_queue = false,
> +		.wake_capable = false,
> +	},
> +	{
> +		.name = "QAIC_CONTROL",
> +		.num = 10,
> +		.num_elements = 128,
> +		.local_elements = 0,
> +		.event_ring = 0,
> +		.dir = DMA_TO_DEVICE,
> +		.ee_mask = MHI_CH_EE_AMSS,
> +		.pollcfg = 0,
> +		.doorbell = MHI_DB_BRST_DISABLE,
> +		.lpm_notify = false,
> +		.offload_channel = false,
> +		.doorbell_mode_switch = false,
> +		.auto_queue = false,
> +		.wake_capable = false,
> +	},
> +	{
> +		.name = "QAIC_CONTROL",
> +		.num = 11,
> +		.num_elements = 128,
> +		.local_elements = 0,
> +		.event_ring = 0,
> +		.dir = DMA_FROM_DEVICE,
> +		.ee_mask = MHI_CH_EE_AMSS,
> +		.pollcfg = 0,
> +		.doorbell = MHI_DB_BRST_DISABLE,
> +		.lpm_notify = false,
> +		.offload_channel = false,
> +		.doorbell_mode_switch = false,
> +		.auto_queue = false,
> +		.wake_capable = false,
> +	},
> +	{
> +		.name = "QAIC_LOGGING",
> +		.num = 12,
> +		.num_elements = 32,
> +		.local_elements = 0,
> +		.event_ring = 0,
> +		.dir = DMA_TO_DEVICE,
> +		.ee_mask = MHI_CH_EE_SBL,
> +		.pollcfg = 0,
> +		.doorbell = MHI_DB_BRST_DISABLE,
> +		.lpm_notify = false,
> +		.offload_channel = false,
> +		.doorbell_mode_switch = false,
> +		.auto_queue = false,
> +		.wake_capable = false,
> +	},
> +	{
> +		.name = "QAIC_LOGGING",
> +		.num = 13,
> +		.num_elements = 32,
> +		.local_elements = 0,
> +		.event_ring = 0,
> +		.dir = DMA_FROM_DEVICE,
> +		.ee_mask = MHI_CH_EE_SBL,
> +		.pollcfg = 0,
> +		.doorbell = MHI_DB_BRST_DISABLE,
> +		.lpm_notify = false,
> +		.offload_channel = false,
> +		.doorbell_mode_switch = false,
> +		.auto_queue = false,
> +		.wake_capable = false,
> +	},
> +	{
> +		.name = "QAIC_STATUS",
> +		.num = 14,
> +		.num_elements = 32,
> +		.local_elements = 0,
> +		.event_ring = 0,
> +		.dir = DMA_TO_DEVICE,
> +		.ee_mask = MHI_CH_EE_AMSS,
> +		.pollcfg = 0,
> +		.doorbell = MHI_DB_BRST_DISABLE,
> +		.lpm_notify = false,
> +		.offload_channel = false,
> +		.doorbell_mode_switch = false,
> +		.auto_queue = false,
> +		.wake_capable = false,
> +	},
> +	{
> +		.name = "QAIC_STATUS",
> +		.num = 15,
> +		.num_elements = 32,
> +		.local_elements = 0,
> +		.event_ring = 0,
> +		.dir = DMA_FROM_DEVICE,
> +		.ee_mask = MHI_CH_EE_AMSS,
> +		.pollcfg = 0,
> +		.doorbell = MHI_DB_BRST_DISABLE,
> +		.lpm_notify = false,
> +		.offload_channel = false,
> +		.doorbell_mode_switch = false,
> +		.auto_queue = false,
> +		.wake_capable = false,
> +	},
> +	{
> +		.name = "QAIC_TELEMETRY",
> +		.num = 16,
> +		.num_elements = 32,
> +		.local_elements = 0,
> +		.event_ring = 0,
> +		.dir = DMA_TO_DEVICE,
> +		.ee_mask = MHI_CH_EE_AMSS,
> +		.pollcfg = 0,
> +		.doorbell = MHI_DB_BRST_DISABLE,
> +		.lpm_notify = false,
> +		.offload_channel = false,
> +		.doorbell_mode_switch = false,
> +		.auto_queue = false,
> +		.wake_capable = false,
> +	},
> +	{
> +		.name = "QAIC_TELEMETRY",
> +		.num = 17,
> +		.num_elements = 32,
> +		.local_elements = 0,
> +		.event_ring = 0,
> +		.dir = DMA_FROM_DEVICE,
> +		.ee_mask = MHI_CH_EE_AMSS,
> +		.pollcfg = 0,
> +		.doorbell = MHI_DB_BRST_DISABLE,
> +		.lpm_notify = false,
> +		.offload_channel = false,
> +		.doorbell_mode_switch = false,
> +		.auto_queue = false,
> +		.wake_capable = false,
> +	},
> +	{
> +		.name = "QAIC_DEBUG",
> +		.num = 18,
> +		.num_elements = 32,
> +		.local_elements = 0,
> +		.event_ring = 0,
> +		.dir = DMA_TO_DEVICE,
> +		.ee_mask = MHI_CH_EE_AMSS,
> +		.pollcfg = 0,
> +		.doorbell = MHI_DB_BRST_DISABLE,
> +		.lpm_notify = false,
> +		.offload_channel = false,
> +		.doorbell_mode_switch = false,
> +		.auto_queue = false,
> +		.wake_capable = false,
> +	},
> +	{
> +		.name = "QAIC_DEBUG",
> +		.num = 19,
> +		.num_elements = 32,
> +		.local_elements = 0,
> +		.event_ring = 0,
> +		.dir = DMA_FROM_DEVICE,
> +		.ee_mask = MHI_CH_EE_AMSS,
> +		.pollcfg = 0,
> +		.doorbell = MHI_DB_BRST_DISABLE,
> +		.lpm_notify = false,
> +		.offload_channel = false,
> +		.doorbell_mode_switch = false,
> +		.auto_queue = false,
> +		.wake_capable = false,
> +	},
> +	{
> +		.name = "QAIC_TIMESYNC",
> +		.num = 20,
> +		.num_elements = 32,
> +		.local_elements = 0,
> +		.event_ring = 0,
> +		.dir = DMA_TO_DEVICE,
> +		.ee_mask = MHI_CH_EE_SBL | MHI_CH_EE_AMSS,
> +		.pollcfg = 0,
> +		.doorbell = MHI_DB_BRST_DISABLE,
> +		.lpm_notify = false,
> +		.offload_channel = false,
> +		.doorbell_mode_switch = false,
> +		.auto_queue = false,
> +		.wake_capable = false,
> +	},
> +	{
> +		.num = 21,
> +		.name = "QAIC_TIMESYNC",
> +		.num_elements = 32,
> +		.local_elements = 0,
> +		.event_ring = 0,
> +		.dir = DMA_FROM_DEVICE,
> +		.ee_mask = MHI_CH_EE_SBL | MHI_CH_EE_AMSS,
> +		.pollcfg = 0,
> +		.doorbell = MHI_DB_BRST_DISABLE,
> +		.lpm_notify = false,
> +		.offload_channel = false,
> +		.doorbell_mode_switch = false,
> +		.auto_queue = false,
> +		.wake_capable = false,
> +	},
> +};
> +
> +static struct mhi_event_config aic100_events[] = {
> +	{
> +		.num_elements = 32,
> +		.irq_moderation_ms = 0,
> +		.irq = 0,
> +		.channel = U32_MAX,
> +		.priority = 1,
> +		.mode = MHI_DB_BRST_DISABLE,
> +		.data_type = MHI_ER_CTRL,
> +		.hardware_event = false,
> +		.client_managed = false,
> +		.offload_channel = false,
> +	},
> +};
> +
> +static struct mhi_controller_config aic100_config = {
> +	.max_channels = 128,
> +	.timeout_ms = 0, /* controlled by mhi_timeout */
> +	.buf_len = 0,
> +	.num_channels = ARRAY_SIZE(aic100_channels),
> +	.ch_cfg = aic100_channels,
> +	.num_events = ARRAY_SIZE(aic100_events),
> +	.event_cfg = aic100_events,
> +	.use_bounce_buf = false,
> +	.m2_no_db = false,
> +};
> +
> +static int mhi_read_reg(struct mhi_controller *mhi_cntl, void __iomem *addr, u32 *out)
> +{
> +	u32 tmp = readl_relaxed(addr);
> +
> +	if (tmp == U32_MAX)
> +		return -EIO;
> +
> +	*out = tmp;
> +
> +	return 0;
> +}
> +
> +static void mhi_write_reg(struct mhi_controller *mhi_cntl, void __iomem *addr, u32 val)
> +{
> +	writel_relaxed(val, addr);
> +}
> +
> +static int mhi_runtime_get(struct mhi_controller *mhi_cntl)
> +{
> +	return 0;
> +}
> +
> +static void mhi_runtime_put(struct mhi_controller *mhi_cntl)
> +{
> +}
> +
> +static void mhi_status_cb(struct mhi_controller *mhi_cntl, enum mhi_callback reason)
> +{
> +	struct qaic_device *qdev = pci_get_drvdata(to_pci_dev(mhi_cntl->cntrl_dev));
> +
> +	/* this event occurs in atomic context */
> +	if (reason == MHI_CB_FATAL_ERROR)
> +		pci_err(qdev->pdev, "Fatal error received from device. Attempting to recover\n");
> +	/* this event occurs in non-atomic context */
> +	if (reason == MHI_CB_SYS_ERROR && !qdev->in_reset)

Looks like qdev->in_reset should be protected by qdev->dev_lock.

> +		qaic_dev_reset_clean_local_state(qdev, true);
> +}
> +
> +static int mhi_reset_and_async_power_up(struct mhi_controller *mhi_cntl)
> +{
> +	char time_sec = 1;
> +	int current_ee;
> +	int ret;
> +
> +	/* Reset the device to bring the device in PBL EE */
> +	mhi_soc_reset(mhi_cntl);
> +
> +	/*
> +	 * Keep checking the execution environment(EE) after every 1 second
> +	 * interval.
> +	 */
> +	do {
> +		msleep(1000)> +		current_ee = mhi_get_exec_env(mhi_cntl);
> +	} while (current_ee != MHI_EE_PBL && time_sec++ <= MAX_RESET_TIME_SEC);
> +
> +	/* If the device is in PBL EE retry power up */
> +	if (current_ee == MHI_EE_PBL)
> +		ret = mhi_async_power_up(mhi_cntl);
> +	else
> +		ret = -EIO;
> +
> +	return ret;
> +}
> +
> +struct mhi_controller *qaic_mhi_register_controller(struct pci_dev *pci_dev, void __iomem *mhi_bar,
> +						    int mhi_irq)
> +{
> +	struct mhi_controller *mhi_cntl;
> +	int ret;
> +
> +	mhi_cntl = devm_kzalloc(&pci_dev->dev, sizeof(*mhi_cntl), GFP_KERNEL);
> +	if (!mhi_cntl)
> +		return ERR_PTR(-ENOMEM);
> +
> +	mhi_cntl->cntrl_dev = &pci_dev->dev;
> +
> +	/*
> +	 * Covers the entire possible physical ram region. Remote side is
> +	 * going to calculate a size of this range, so subtract 1 to prevent
> +	 * rollover.
> +	 */
> +	mhi_cntl->iova_start = 0;
> +	mhi_cntl->iova_stop = PHYS_ADDR_MAX - 1;
> +	mhi_cntl->status_cb = mhi_status_cb;
> +	mhi_cntl->runtime_get = mhi_runtime_get;
> +	mhi_cntl->runtime_put = mhi_runtime_put;
> +	mhi_cntl->read_reg = mhi_read_reg;
> +	mhi_cntl->write_reg = mhi_write_reg;
> +	mhi_cntl->regs = mhi_bar;
> +	mhi_cntl->reg_len = SZ_4K;
> +	mhi_cntl->nr_irqs = 1;
> +	mhi_cntl->irq = devm_kmalloc(&pci_dev->dev, sizeof(*mhi_cntl->irq), GFP_KERNEL);
> +
> +	if (!mhi_cntl->irq)
> +		return ERR_PTR(-ENOMEM);
> +
> +	mhi_cntl->irq[0] = mhi_irq;
> +	mhi_cntl->fw_image = "qcom/aic100/sbl.bin";
> +
> +	/* use latest configured timeout */
> +	aic100_config.timeout_ms = mhi_timeout;
> +	ret = mhi_register_controller(mhi_cntl, &aic100_config);
> +	if (ret) {
> +		pci_err(pci_dev, "mhi_register_controller failed %d\n", ret);
> +		return ERR_PTR(ret);
> +	}
> +
> +	ret = mhi_prepare_for_power_up(mhi_cntl);
> +	if (ret) {
> +		pci_err(pci_dev, "mhi_prepare_for_power_up failed %d\n", ret);
> +		goto prepare_power_up_fail;
> +	}
> +
> +	ret = mhi_async_power_up(mhi_cntl);
> +	/*
> +	 * If EIO is returned it is possible that device is in SBL EE, which is
> +	 * undesired. SOC reset the device and try to power up again.
> +	 */
> +	if (ret == -EIO && MHI_EE_SBL == mhi_get_exec_env(mhi_cntl)) {
> +		pci_err(pci_dev, "Device is not expected to be SBL EE. SOC resetting the device to put it in PBL EE and again trying mhi async power up. Error %d\n",

Please try to make this error message shorter. 

Regards,
Jacek
Jeffrey Hugo March 13, 2023, 5:45 p.m. UTC | #2 
On 3/13/2023 7:39 AM, Jacek Lawrynowicz wrote:
> Hi,
> 
> On 06.03.2023 22:33, Jeffrey Hugo wrote:
>> An AIC100 device contains a MHI interface with a number of different
>> channels for controlling different aspects of the device. The MHI
>> controller works with the MHI bus to enable and drive that interface.
>>
>> AIC100 uses the BHI protocol in PBL to load SBL. The MHI controller
>> expects the SBL to be located at /lib/firmware/qcom/aic100/sbl.bin and
>> expects the MHI bus to manage the process of loading and sending SBL to
>> the device.
>>
>> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
>> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
>> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
>> ---
>>   drivers/accel/qaic/mhi_controller.c | 563 ++++++++++++++++++++++++++++++++++++
>>   drivers/accel/qaic/mhi_controller.h |  16 +
>>   2 files changed, 579 insertions(+)
>>   create mode 100644 drivers/accel/qaic/mhi_controller.c
>>   create mode 100644 drivers/accel/qaic/mhi_controller.h
>>
>> diff --git a/drivers/accel/qaic/mhi_controller.c b/drivers/accel/qaic/mhi_controller.c
>> new file mode 100644
>> index 0000000..f16dbb7
>> --- /dev/null
>> +++ b/drivers/accel/qaic/mhi_controller.c
>> @@ -0,0 +1,563 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +
>> +/* Copyright (c) 2019-2021, The Linux Foundation. All rights reserved. */
>> +/* Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved. */
>> +
>> +#include <linux/delay.h>
>> +#include <linux/err.h>
>> +#include <linux/memblock.h>
>> +#include <linux/mhi.h>
>> +#include <linux/moduleparam.h>
>> +#include <linux/pci.h>
>> +#include <linux/sizes.h>
>> +
>> +#include "mhi_controller.h"
>> +#include "qaic.h"
>> +
>> +#define MAX_RESET_TIME_SEC 25
>> +
>> +static unsigned int mhi_timeout = 2000; /* 2 sec default */
>> +module_param(mhi_timeout, uint, 0600);
> 
> Consider documenting the param with MODULE_PARM_DESC() and adding _ms postfix to
> indicate that time units it is using.

Will do.

> 
>> +
>> +static struct mhi_channel_config aic100_channels[] = {
>> +	{
>> +		.name = "QAIC_LOOPBACK",
>> +		.num = 0,
>> +		.num_elements = 32,
>> +		.local_elements = 0,
>> +		.event_ring = 0,
>> +		.dir = DMA_TO_DEVICE,
>> +		.ee_mask = MHI_CH_EE_AMSS,
>> +		.pollcfg = 0,
>> +		.doorbell = MHI_DB_BRST_DISABLE,
>> +		.lpm_notify = false,
>> +		.offload_channel = false,
>> +		.doorbell_mode_switch = false,
>> +		.auto_queue = false,
>> +		.wake_capable = false,
>> +	},
>> +	{
>> +		.name = "QAIC_LOOPBACK",
>> +		.num = 1,
>> +		.num_elements = 32,
>> +		.local_elements = 0,
>> +		.event_ring = 0,
>> +		.dir = DMA_FROM_DEVICE,
>> +		.ee_mask = MHI_CH_EE_AMSS,
>> +		.pollcfg = 0,
>> +		.doorbell = MHI_DB_BRST_DISABLE,
>> +		.lpm_notify = false,
>> +		.offload_channel = false,
>> +		.doorbell_mode_switch = false,
>> +		.auto_queue = false,
>> +		.wake_capable = false,
>> +	},
>> +	{
>> +		.name = "QAIC_SAHARA",
>> +		.num = 2,
>> +		.num_elements = 32,
>> +		.local_elements = 0,
>> +		.event_ring = 0,
>> +		.dir = DMA_TO_DEVICE,
>> +		.ee_mask = MHI_CH_EE_SBL,
>> +		.pollcfg = 0,
>> +		.doorbell = MHI_DB_BRST_DISABLE,
>> +		.lpm_notify = false,
>> +		.offload_channel = false,
>> +		.doorbell_mode_switch = false,
>> +		.auto_queue = false,
>> +		.wake_capable = false,
>> +	},
>> +	{
>> +		.name = "QAIC_SAHARA",
>> +		.num = 3,
>> +		.num_elements = 32,
>> +		.local_elements = 0,
>> +		.event_ring = 0,
>> +		.dir = DMA_FROM_DEVICE,
>> +		.ee_mask = MHI_CH_EE_SBL,
>> +		.pollcfg = 0,
>> +		.doorbell = MHI_DB_BRST_DISABLE,
>> +		.lpm_notify = false,
>> +		.offload_channel = false,
>> +		.doorbell_mode_switch = false,
>> +		.auto_queue = false,
>> +		.wake_capable = false,
>> +	},
>> +	{
>> +		.name = "QAIC_DIAG",
>> +		.num = 4,
>> +		.num_elements = 32,
>> +		.local_elements = 0,
>> +		.event_ring = 0,
>> +		.dir = DMA_TO_DEVICE,
>> +		.ee_mask = MHI_CH_EE_AMSS,
>> +		.pollcfg = 0,
>> +		.doorbell = MHI_DB_BRST_DISABLE,
>> +		.lpm_notify = false,
>> +		.offload_channel = false,
>> +		.doorbell_mode_switch = false,
>> +		.auto_queue = false,
>> +		.wake_capable = false,
>> +	},
>> +	{
>> +		.name = "QAIC_DIAG",
>> +		.num = 5,
>> +		.num_elements = 32,
>> +		.local_elements = 0,
>> +		.event_ring = 0,
>> +		.dir = DMA_FROM_DEVICE,
>> +		.ee_mask = MHI_CH_EE_AMSS,
>> +		.pollcfg = 0,
>> +		.doorbell = MHI_DB_BRST_DISABLE,
>> +		.lpm_notify = false,
>> +		.offload_channel = false,
>> +		.doorbell_mode_switch = false,
>> +		.auto_queue = false,
>> +		.wake_capable = false,
>> +	},
>> +	{
>> +		.name = "QAIC_SSR",
>> +		.num = 6,
>> +		.num_elements = 32,
>> +		.local_elements = 0,
>> +		.event_ring = 0,
>> +		.dir = DMA_TO_DEVICE,
>> +		.ee_mask = MHI_CH_EE_AMSS,
>> +		.pollcfg = 0,
>> +		.doorbell = MHI_DB_BRST_DISABLE,
>> +		.lpm_notify = false,
>> +		.offload_channel = false,
>> +		.doorbell_mode_switch = false,
>> +		.auto_queue = false,
>> +		.wake_capable = false,
>> +	},
>> +	{
>> +		.name = "QAIC_SSR",
>> +		.num = 7,
>> +		.num_elements = 32,
>> +		.local_elements = 0,
>> +		.event_ring = 0,
>> +		.dir = DMA_FROM_DEVICE,
>> +		.ee_mask = MHI_CH_EE_AMSS,
>> +		.pollcfg = 0,
>> +		.doorbell = MHI_DB_BRST_DISABLE,
>> +		.lpm_notify = false,
>> +		.offload_channel = false,
>> +		.doorbell_mode_switch = false,
>> +		.auto_queue = false,
>> +		.wake_capable = false,
>> +	},
>> +	{
>> +		.name = "QAIC_QDSS",
>> +		.num = 8,
>> +		.num_elements = 32,
>> +		.local_elements = 0,
>> +		.event_ring = 0,
>> +		.dir = DMA_TO_DEVICE,
>> +		.ee_mask = MHI_CH_EE_AMSS,
>> +		.pollcfg = 0,
>> +		.doorbell = MHI_DB_BRST_DISABLE,
>> +		.lpm_notify = false,
>> +		.offload_channel = false,
>> +		.doorbell_mode_switch = false,
>> +		.auto_queue = false,
>> +		.wake_capable = false,
>> +	},
>> +	{
>> +		.name = "QAIC_QDSS",
>> +		.num = 9,
>> +		.num_elements = 32,
>> +		.local_elements = 0,
>> +		.event_ring = 0,
>> +		.dir = DMA_FROM_DEVICE,
>> +		.ee_mask = MHI_CH_EE_AMSS,
>> +		.pollcfg = 0,
>> +		.doorbell = MHI_DB_BRST_DISABLE,
>> +		.lpm_notify = false,
>> +		.offload_channel = false,
>> +		.doorbell_mode_switch = false,
>> +		.auto_queue = false,
>> +		.wake_capable = false,
>> +	},
>> +	{
>> +		.name = "QAIC_CONTROL",
>> +		.num = 10,
>> +		.num_elements = 128,
>> +		.local_elements = 0,
>> +		.event_ring = 0,
>> +		.dir = DMA_TO_DEVICE,
>> +		.ee_mask = MHI_CH_EE_AMSS,
>> +		.pollcfg = 0,
>> +		.doorbell = MHI_DB_BRST_DISABLE,
>> +		.lpm_notify = false,
>> +		.offload_channel = false,
>> +		.doorbell_mode_switch = false,
>> +		.auto_queue = false,
>> +		.wake_capable = false,
>> +	},
>> +	{
>> +		.name = "QAIC_CONTROL",
>> +		.num = 11,
>> +		.num_elements = 128,
>> +		.local_elements = 0,
>> +		.event_ring = 0,
>> +		.dir = DMA_FROM_DEVICE,
>> +		.ee_mask = MHI_CH_EE_AMSS,
>> +		.pollcfg = 0,
>> +		.doorbell = MHI_DB_BRST_DISABLE,
>> +		.lpm_notify = false,
>> +		.offload_channel = false,
>> +		.doorbell_mode_switch = false,
>> +		.auto_queue = false,
>> +		.wake_capable = false,
>> +	},
>> +	{
>> +		.name = "QAIC_LOGGING",
>> +		.num = 12,
>> +		.num_elements = 32,
>> +		.local_elements = 0,
>> +		.event_ring = 0,
>> +		.dir = DMA_TO_DEVICE,
>> +		.ee_mask = MHI_CH_EE_SBL,
>> +		.pollcfg = 0,
>> +		.doorbell = MHI_DB_BRST_DISABLE,
>> +		.lpm_notify = false,
>> +		.offload_channel = false,
>> +		.doorbell_mode_switch = false,
>> +		.auto_queue = false,
>> +		.wake_capable = false,
>> +	},
>> +	{
>> +		.name = "QAIC_LOGGING",
>> +		.num = 13,
>> +		.num_elements = 32,
>> +		.local_elements = 0,
>> +		.event_ring = 0,
>> +		.dir = DMA_FROM_DEVICE,
>> +		.ee_mask = MHI_CH_EE_SBL,
>> +		.pollcfg = 0,
>> +		.doorbell = MHI_DB_BRST_DISABLE,
>> +		.lpm_notify = false,
>> +		.offload_channel = false,
>> +		.doorbell_mode_switch = false,
>> +		.auto_queue = false,
>> +		.wake_capable = false,
>> +	},
>> +	{
>> +		.name = "QAIC_STATUS",
>> +		.num = 14,
>> +		.num_elements = 32,
>> +		.local_elements = 0,
>> +		.event_ring = 0,
>> +		.dir = DMA_TO_DEVICE,
>> +		.ee_mask = MHI_CH_EE_AMSS,
>> +		.pollcfg = 0,
>> +		.doorbell = MHI_DB_BRST_DISABLE,
>> +		.lpm_notify = false,
>> +		.offload_channel = false,
>> +		.doorbell_mode_switch = false,
>> +		.auto_queue = false,
>> +		.wake_capable = false,
>> +	},
>> +	{
>> +		.name = "QAIC_STATUS",
>> +		.num = 15,
>> +		.num_elements = 32,
>> +		.local_elements = 0,
>> +		.event_ring = 0,
>> +		.dir = DMA_FROM_DEVICE,
>> +		.ee_mask = MHI_CH_EE_AMSS,
>> +		.pollcfg = 0,
>> +		.doorbell = MHI_DB_BRST_DISABLE,
>> +		.lpm_notify = false,
>> +		.offload_channel = false,
>> +		.doorbell_mode_switch = false,
>> +		.auto_queue = false,
>> +		.wake_capable = false,
>> +	},
>> +	{
>> +		.name = "QAIC_TELEMETRY",
>> +		.num = 16,
>> +		.num_elements = 32,
>> +		.local_elements = 0,
>> +		.event_ring = 0,
>> +		.dir = DMA_TO_DEVICE,
>> +		.ee_mask = MHI_CH_EE_AMSS,
>> +		.pollcfg = 0,
>> +		.doorbell = MHI_DB_BRST_DISABLE,
>> +		.lpm_notify = false,
>> +		.offload_channel = false,
>> +		.doorbell_mode_switch = false,
>> +		.auto_queue = false,
>> +		.wake_capable = false,
>> +	},
>> +	{
>> +		.name = "QAIC_TELEMETRY",
>> +		.num = 17,
>> +		.num_elements = 32,
>> +		.local_elements = 0,
>> +		.event_ring = 0,
>> +		.dir = DMA_FROM_DEVICE,
>> +		.ee_mask = MHI_CH_EE_AMSS,
>> +		.pollcfg = 0,
>> +		.doorbell = MHI_DB_BRST_DISABLE,
>> +		.lpm_notify = false,
>> +		.offload_channel = false,
>> +		.doorbell_mode_switch = false,
>> +		.auto_queue = false,
>> +		.wake_capable = false,
>> +	},
>> +	{
>> +		.name = "QAIC_DEBUG",
>> +		.num = 18,
>> +		.num_elements = 32,
>> +		.local_elements = 0,
>> +		.event_ring = 0,
>> +		.dir = DMA_TO_DEVICE,
>> +		.ee_mask = MHI_CH_EE_AMSS,
>> +		.pollcfg = 0,
>> +		.doorbell = MHI_DB_BRST_DISABLE,
>> +		.lpm_notify = false,
>> +		.offload_channel = false,
>> +		.doorbell_mode_switch = false,
>> +		.auto_queue = false,
>> +		.wake_capable = false,
>> +	},
>> +	{
>> +		.name = "QAIC_DEBUG",
>> +		.num = 19,
>> +		.num_elements = 32,
>> +		.local_elements = 0,
>> +		.event_ring = 0,
>> +		.dir = DMA_FROM_DEVICE,
>> +		.ee_mask = MHI_CH_EE_AMSS,
>> +		.pollcfg = 0,
>> +		.doorbell = MHI_DB_BRST_DISABLE,
>> +		.lpm_notify = false,
>> +		.offload_channel = false,
>> +		.doorbell_mode_switch = false,
>> +		.auto_queue = false,
>> +		.wake_capable = false,
>> +	},
>> +	{
>> +		.name = "QAIC_TIMESYNC",
>> +		.num = 20,
>> +		.num_elements = 32,
>> +		.local_elements = 0,
>> +		.event_ring = 0,
>> +		.dir = DMA_TO_DEVICE,
>> +		.ee_mask = MHI_CH_EE_SBL | MHI_CH_EE_AMSS,
>> +		.pollcfg = 0,
>> +		.doorbell = MHI_DB_BRST_DISABLE,
>> +		.lpm_notify = false,
>> +		.offload_channel = false,
>> +		.doorbell_mode_switch = false,
>> +		.auto_queue = false,
>> +		.wake_capable = false,
>> +	},
>> +	{
>> +		.num = 21,
>> +		.name = "QAIC_TIMESYNC",
>> +		.num_elements = 32,
>> +		.local_elements = 0,
>> +		.event_ring = 0,
>> +		.dir = DMA_FROM_DEVICE,
>> +		.ee_mask = MHI_CH_EE_SBL | MHI_CH_EE_AMSS,
>> +		.pollcfg = 0,
>> +		.doorbell = MHI_DB_BRST_DISABLE,
>> +		.lpm_notify = false,
>> +		.offload_channel = false,
>> +		.doorbell_mode_switch = false,
>> +		.auto_queue = false,
>> +		.wake_capable = false,
>> +	},
>> +};
>> +
>> +static struct mhi_event_config aic100_events[] = {
>> +	{
>> +		.num_elements = 32,
>> +		.irq_moderation_ms = 0,
>> +		.irq = 0,
>> +		.channel = U32_MAX,
>> +		.priority = 1,
>> +		.mode = MHI_DB_BRST_DISABLE,
>> +		.data_type = MHI_ER_CTRL,
>> +		.hardware_event = false,
>> +		.client_managed = false,
>> +		.offload_channel = false,
>> +	},
>> +};
>> +
>> +static struct mhi_controller_config aic100_config = {
>> +	.max_channels = 128,
>> +	.timeout_ms = 0, /* controlled by mhi_timeout */
>> +	.buf_len = 0,
>> +	.num_channels = ARRAY_SIZE(aic100_channels),
>> +	.ch_cfg = aic100_channels,
>> +	.num_events = ARRAY_SIZE(aic100_events),
>> +	.event_cfg = aic100_events,
>> +	.use_bounce_buf = false,
>> +	.m2_no_db = false,
>> +};
>> +
>> +static int mhi_read_reg(struct mhi_controller *mhi_cntl, void __iomem *addr, u32 *out)
>> +{
>> +	u32 tmp = readl_relaxed(addr);
>> +
>> +	if (tmp == U32_MAX)
>> +		return -EIO;
>> +
>> +	*out = tmp;
>> +
>> +	return 0;
>> +}
>> +
>> +static void mhi_write_reg(struct mhi_controller *mhi_cntl, void __iomem *addr, u32 val)
>> +{
>> +	writel_relaxed(val, addr);
>> +}
>> +
>> +static int mhi_runtime_get(struct mhi_controller *mhi_cntl)
>> +{
>> +	return 0;
>> +}
>> +
>> +static void mhi_runtime_put(struct mhi_controller *mhi_cntl)
>> +{
>> +}
>> +
>> +static void mhi_status_cb(struct mhi_controller *mhi_cntl, enum mhi_callback reason)
>> +{
>> +	struct qaic_device *qdev = pci_get_drvdata(to_pci_dev(mhi_cntl->cntrl_dev));
>> +
>> +	/* this event occurs in atomic context */
>> +	if (reason == MHI_CB_FATAL_ERROR)
>> +		pci_err(qdev->pdev, "Fatal error received from device. Attempting to recover\n");
>> +	/* this event occurs in non-atomic context */
>> +	if (reason == MHI_CB_SYS_ERROR && !qdev->in_reset)
> 
> Looks like qdev->in_reset should be protected by qdev->dev_lock.

Will check.

> 
>> +		qaic_dev_reset_clean_local_state(qdev, true);
>> +}
>> +
>> +static int mhi_reset_and_async_power_up(struct mhi_controller *mhi_cntl)
>> +{
>> +	char time_sec = 1;
>> +	int current_ee;
>> +	int ret;
>> +
>> +	/* Reset the device to bring the device in PBL EE */
>> +	mhi_soc_reset(mhi_cntl);
>> +
>> +	/*
>> +	 * Keep checking the execution environment(EE) after every 1 second
>> +	 * interval.
>> +	 */
>> +	do {
>> +		msleep(1000)> +		current_ee = mhi_get_exec_env(mhi_cntl);
>> +	} while (current_ee != MHI_EE_PBL && time_sec++ <= MAX_RESET_TIME_SEC);
>> +
>> +	/* If the device is in PBL EE retry power up */
>> +	if (current_ee == MHI_EE_PBL)
>> +		ret = mhi_async_power_up(mhi_cntl);
>> +	else
>> +		ret = -EIO;
>> +
>> +	return ret;
>> +}
>> +
>> +struct mhi_controller *qaic_mhi_register_controller(struct pci_dev *pci_dev, void __iomem *mhi_bar,
>> +						    int mhi_irq)
>> +{
>> +	struct mhi_controller *mhi_cntl;
>> +	int ret;
>> +
>> +	mhi_cntl = devm_kzalloc(&pci_dev->dev, sizeof(*mhi_cntl), GFP_KERNEL);
>> +	if (!mhi_cntl)
>> +		return ERR_PTR(-ENOMEM);
>> +
>> +	mhi_cntl->cntrl_dev = &pci_dev->dev;
>> +
>> +	/*
>> +	 * Covers the entire possible physical ram region. Remote side is
>> +	 * going to calculate a size of this range, so subtract 1 to prevent
>> +	 * rollover.
>> +	 */
>> +	mhi_cntl->iova_start = 0;
>> +	mhi_cntl->iova_stop = PHYS_ADDR_MAX - 1;
>> +	mhi_cntl->status_cb = mhi_status_cb;
>> +	mhi_cntl->runtime_get = mhi_runtime_get;
>> +	mhi_cntl->runtime_put = mhi_runtime_put;
>> +	mhi_cntl->read_reg = mhi_read_reg;
>> +	mhi_cntl->write_reg = mhi_write_reg;
>> +	mhi_cntl->regs = mhi_bar;
>> +	mhi_cntl->reg_len = SZ_4K;
>> +	mhi_cntl->nr_irqs = 1;
>> +	mhi_cntl->irq = devm_kmalloc(&pci_dev->dev, sizeof(*mhi_cntl->irq), GFP_KERNEL);
>> +
>> +	if (!mhi_cntl->irq)
>> +		return ERR_PTR(-ENOMEM);
>> +
>> +	mhi_cntl->irq[0] = mhi_irq;
>> +	mhi_cntl->fw_image = "qcom/aic100/sbl.bin";
>> +
>> +	/* use latest configured timeout */
>> +	aic100_config.timeout_ms = mhi_timeout;
>> +	ret = mhi_register_controller(mhi_cntl, &aic100_config);
>> +	if (ret) {
>> +		pci_err(pci_dev, "mhi_register_controller failed %d\n", ret);
>> +		return ERR_PTR(ret);
>> +	}
>> +
>> +	ret = mhi_prepare_for_power_up(mhi_cntl);
>> +	if (ret) {
>> +		pci_err(pci_dev, "mhi_prepare_for_power_up failed %d\n", ret);
>> +		goto prepare_power_up_fail;
>> +	}
>> +
>> +	ret = mhi_async_power_up(mhi_cntl);
>> +	/*
>> +	 * If EIO is returned it is possible that device is in SBL EE, which is
>> +	 * undesired. SOC reset the device and try to power up again.
>> +	 */
>> +	if (ret == -EIO && MHI_EE_SBL == mhi_get_exec_env(mhi_cntl)) {
>> +		pci_err(pci_dev, "Device is not expected to be SBL EE. SOC resetting the device to put it in PBL EE and again trying mhi async power up. Error %d\n",

Will have a look.
diff mbox series

Patch

diff --git a/drivers/accel/qaic/mhi_controller.c b/drivers/accel/qaic/mhi_controller.c
new file mode 100644
index 0000000..f16dbb7
--- /dev/null
+++ b/drivers/accel/qaic/mhi_controller.c
@@ -0,0 +1,563 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+
+/* Copyright (c) 2019-2021, The Linux Foundation. All rights reserved. */
+/* Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved. */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/memblock.h>
+#include <linux/mhi.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <linux/sizes.h>
+
+#include "mhi_controller.h"
+#include "qaic.h"
+
+#define MAX_RESET_TIME_SEC 25
+
+static unsigned int mhi_timeout = 2000; /* 2 sec default */
+module_param(mhi_timeout, uint, 0600);
+
+static struct mhi_channel_config aic100_channels[] = {
+	{
+		.name = "QAIC_LOOPBACK",
+		.num = 0,
+		.num_elements = 32,
+		.local_elements = 0,
+		.event_ring = 0,
+		.dir = DMA_TO_DEVICE,
+		.ee_mask = MHI_CH_EE_AMSS,
+		.pollcfg = 0,
+		.doorbell = MHI_DB_BRST_DISABLE,
+		.lpm_notify = false,
+		.offload_channel = false,
+		.doorbell_mode_switch = false,
+		.auto_queue = false,
+		.wake_capable = false,
+	},
+	{
+		.name = "QAIC_LOOPBACK",
+		.num = 1,
+		.num_elements = 32,
+		.local_elements = 0,
+		.event_ring = 0,
+		.dir = DMA_FROM_DEVICE,
+		.ee_mask = MHI_CH_EE_AMSS,
+		.pollcfg = 0,
+		.doorbell = MHI_DB_BRST_DISABLE,
+		.lpm_notify = false,
+		.offload_channel = false,
+		.doorbell_mode_switch = false,
+		.auto_queue = false,
+		.wake_capable = false,
+	},
+	{
+		.name = "QAIC_SAHARA",
+		.num = 2,
+		.num_elements = 32,
+		.local_elements = 0,
+		.event_ring = 0,
+		.dir = DMA_TO_DEVICE,
+		.ee_mask = MHI_CH_EE_SBL,
+		.pollcfg = 0,
+		.doorbell = MHI_DB_BRST_DISABLE,
+		.lpm_notify = false,
+		.offload_channel = false,
+		.doorbell_mode_switch = false,
+		.auto_queue = false,
+		.wake_capable = false,
+	},
+	{
+		.name = "QAIC_SAHARA",
+		.num = 3,
+		.num_elements = 32,
+		.local_elements = 0,
+		.event_ring = 0,
+		.dir = DMA_FROM_DEVICE,
+		.ee_mask = MHI_CH_EE_SBL,
+		.pollcfg = 0,
+		.doorbell = MHI_DB_BRST_DISABLE,
+		.lpm_notify = false,
+		.offload_channel = false,
+		.doorbell_mode_switch = false,
+		.auto_queue = false,
+		.wake_capable = false,
+	},
+	{
+		.name = "QAIC_DIAG",
+		.num = 4,
+		.num_elements = 32,
+		.local_elements = 0,
+		.event_ring = 0,
+		.dir = DMA_TO_DEVICE,
+		.ee_mask = MHI_CH_EE_AMSS,
+		.pollcfg = 0,
+		.doorbell = MHI_DB_BRST_DISABLE,
+		.lpm_notify = false,
+		.offload_channel = false,
+		.doorbell_mode_switch = false,
+		.auto_queue = false,
+		.wake_capable = false,
+	},
+	{
+		.name = "QAIC_DIAG",
+		.num = 5,
+		.num_elements = 32,
+		.local_elements = 0,
+		.event_ring = 0,
+		.dir = DMA_FROM_DEVICE,
+		.ee_mask = MHI_CH_EE_AMSS,
+		.pollcfg = 0,
+		.doorbell = MHI_DB_BRST_DISABLE,
+		.lpm_notify = false,
+		.offload_channel = false,
+		.doorbell_mode_switch = false,
+		.auto_queue = false,
+		.wake_capable = false,
+	},
+	{
+		.name = "QAIC_SSR",
+		.num = 6,
+		.num_elements = 32,
+		.local_elements = 0,
+		.event_ring = 0,
+		.dir = DMA_TO_DEVICE,
+		.ee_mask = MHI_CH_EE_AMSS,
+		.pollcfg = 0,
+		.doorbell = MHI_DB_BRST_DISABLE,
+		.lpm_notify = false,
+		.offload_channel = false,
+		.doorbell_mode_switch = false,
+		.auto_queue = false,
+		.wake_capable = false,
+	},
+	{
+		.name = "QAIC_SSR",
+		.num = 7,
+		.num_elements = 32,
+		.local_elements = 0,
+		.event_ring = 0,
+		.dir = DMA_FROM_DEVICE,
+		.ee_mask = MHI_CH_EE_AMSS,
+		.pollcfg = 0,
+		.doorbell = MHI_DB_BRST_DISABLE,
+		.lpm_notify = false,
+		.offload_channel = false,
+		.doorbell_mode_switch = false,
+		.auto_queue = false,
+		.wake_capable = false,
+	},
+	{
+		.name = "QAIC_QDSS",
+		.num = 8,
+		.num_elements = 32,
+		.local_elements = 0,
+		.event_ring = 0,
+		.dir = DMA_TO_DEVICE,
+		.ee_mask = MHI_CH_EE_AMSS,
+		.pollcfg = 0,
+		.doorbell = MHI_DB_BRST_DISABLE,
+		.lpm_notify = false,
+		.offload_channel = false,
+		.doorbell_mode_switch = false,
+		.auto_queue = false,
+		.wake_capable = false,
+	},
+	{
+		.name = "QAIC_QDSS",
+		.num = 9,
+		.num_elements = 32,
+		.local_elements = 0,
+		.event_ring = 0,
+		.dir = DMA_FROM_DEVICE,
+		.ee_mask = MHI_CH_EE_AMSS,
+		.pollcfg = 0,
+		.doorbell = MHI_DB_BRST_DISABLE,
+		.lpm_notify = false,
+		.offload_channel = false,
+		.doorbell_mode_switch = false,
+		.auto_queue = false,
+		.wake_capable = false,
+	},
+	{
+		.name = "QAIC_CONTROL",
+		.num = 10,
+		.num_elements = 128,
+		.local_elements = 0,
+		.event_ring = 0,
+		.dir = DMA_TO_DEVICE,
+		.ee_mask = MHI_CH_EE_AMSS,
+		.pollcfg = 0,
+		.doorbell = MHI_DB_BRST_DISABLE,
+		.lpm_notify = false,
+		.offload_channel = false,
+		.doorbell_mode_switch = false,
+		.auto_queue = false,
+		.wake_capable = false,
+	},
+	{
+		.name = "QAIC_CONTROL",
+		.num = 11,
+		.num_elements = 128,
+		.local_elements = 0,
+		.event_ring = 0,
+		.dir = DMA_FROM_DEVICE,
+		.ee_mask = MHI_CH_EE_AMSS,
+		.pollcfg = 0,
+		.doorbell = MHI_DB_BRST_DISABLE,
+		.lpm_notify = false,
+		.offload_channel = false,
+		.doorbell_mode_switch = false,
+		.auto_queue = false,
+		.wake_capable = false,
+	},
+	{
+		.name = "QAIC_LOGGING",
+		.num = 12,
+		.num_elements = 32,
+		.local_elements = 0,
+		.event_ring = 0,
+		.dir = DMA_TO_DEVICE,
+		.ee_mask = MHI_CH_EE_SBL,
+		.pollcfg = 0,
+		.doorbell = MHI_DB_BRST_DISABLE,
+		.lpm_notify = false,
+		.offload_channel = false,
+		.doorbell_mode_switch = false,
+		.auto_queue = false,
+		.wake_capable = false,
+	},
+	{
+		.name = "QAIC_LOGGING",
+		.num = 13,
+		.num_elements = 32,
+		.local_elements = 0,
+		.event_ring = 0,
+		.dir = DMA_FROM_DEVICE,
+		.ee_mask = MHI_CH_EE_SBL,
+		.pollcfg = 0,
+		.doorbell = MHI_DB_BRST_DISABLE,
+		.lpm_notify = false,
+		.offload_channel = false,
+		.doorbell_mode_switch = false,
+		.auto_queue = false,
+		.wake_capable = false,
+	},
+	{
+		.name = "QAIC_STATUS",
+		.num = 14,
+		.num_elements = 32,
+		.local_elements = 0,
+		.event_ring = 0,
+		.dir = DMA_TO_DEVICE,
+		.ee_mask = MHI_CH_EE_AMSS,
+		.pollcfg = 0,
+		.doorbell = MHI_DB_BRST_DISABLE,
+		.lpm_notify = false,
+		.offload_channel = false,
+		.doorbell_mode_switch = false,
+		.auto_queue = false,
+		.wake_capable = false,
+	},
+	{
+		.name = "QAIC_STATUS",
+		.num = 15,
+		.num_elements = 32,
+		.local_elements = 0,
+		.event_ring = 0,
+		.dir = DMA_FROM_DEVICE,
+		.ee_mask = MHI_CH_EE_AMSS,
+		.pollcfg = 0,
+		.doorbell = MHI_DB_BRST_DISABLE,
+		.lpm_notify = false,
+		.offload_channel = false,
+		.doorbell_mode_switch = false,
+		.auto_queue = false,
+		.wake_capable = false,
+	},
+	{
+		.name = "QAIC_TELEMETRY",
+		.num = 16,
+		.num_elements = 32,
+		.local_elements = 0,
+		.event_ring = 0,
+		.dir = DMA_TO_DEVICE,
+		.ee_mask = MHI_CH_EE_AMSS,
+		.pollcfg = 0,
+		.doorbell = MHI_DB_BRST_DISABLE,
+		.lpm_notify = false,
+		.offload_channel = false,
+		.doorbell_mode_switch = false,
+		.auto_queue = false,
+		.wake_capable = false,
+	},
+	{
+		.name = "QAIC_TELEMETRY",
+		.num = 17,
+		.num_elements = 32,
+		.local_elements = 0,
+		.event_ring = 0,
+		.dir = DMA_FROM_DEVICE,
+		.ee_mask = MHI_CH_EE_AMSS,
+		.pollcfg = 0,
+		.doorbell = MHI_DB_BRST_DISABLE,
+		.lpm_notify = false,
+		.offload_channel = false,
+		.doorbell_mode_switch = false,
+		.auto_queue = false,
+		.wake_capable = false,
+	},
+	{
+		.name = "QAIC_DEBUG",
+		.num = 18,
+		.num_elements = 32,
+		.local_elements = 0,
+		.event_ring = 0,
+		.dir = DMA_TO_DEVICE,
+		.ee_mask = MHI_CH_EE_AMSS,
+		.pollcfg = 0,
+		.doorbell = MHI_DB_BRST_DISABLE,
+		.lpm_notify = false,
+		.offload_channel = false,
+		.doorbell_mode_switch = false,
+		.auto_queue = false,
+		.wake_capable = false,
+	},
+	{
+		.name = "QAIC_DEBUG",
+		.num = 19,
+		.num_elements = 32,
+		.local_elements = 0,
+		.event_ring = 0,
+		.dir = DMA_FROM_DEVICE,
+		.ee_mask = MHI_CH_EE_AMSS,
+		.pollcfg = 0,
+		.doorbell = MHI_DB_BRST_DISABLE,
+		.lpm_notify = false,
+		.offload_channel = false,
+		.doorbell_mode_switch = false,
+		.auto_queue = false,
+		.wake_capable = false,
+	},
+	{
+		.name = "QAIC_TIMESYNC",
+		.num = 20,
+		.num_elements = 32,
+		.local_elements = 0,
+		.event_ring = 0,
+		.dir = DMA_TO_DEVICE,
+		.ee_mask = MHI_CH_EE_SBL | MHI_CH_EE_AMSS,
+		.pollcfg = 0,
+		.doorbell = MHI_DB_BRST_DISABLE,
+		.lpm_notify = false,
+		.offload_channel = false,
+		.doorbell_mode_switch = false,
+		.auto_queue = false,
+		.wake_capable = false,
+	},
+	{
+		.num = 21,
+		.name = "QAIC_TIMESYNC",
+		.num_elements = 32,
+		.local_elements = 0,
+		.event_ring = 0,
+		.dir = DMA_FROM_DEVICE,
+		.ee_mask = MHI_CH_EE_SBL | MHI_CH_EE_AMSS,
+		.pollcfg = 0,
+		.doorbell = MHI_DB_BRST_DISABLE,
+		.lpm_notify = false,
+		.offload_channel = false,
+		.doorbell_mode_switch = false,
+		.auto_queue = false,
+		.wake_capable = false,
+	},
+};
+
+static struct mhi_event_config aic100_events[] = {
+	{
+		.num_elements = 32,
+		.irq_moderation_ms = 0,
+		.irq = 0,
+		.channel = U32_MAX,
+		.priority = 1,
+		.mode = MHI_DB_BRST_DISABLE,
+		.data_type = MHI_ER_CTRL,
+		.hardware_event = false,
+		.client_managed = false,
+		.offload_channel = false,
+	},
+};
+
+static struct mhi_controller_config aic100_config = {
+	.max_channels = 128,
+	.timeout_ms = 0, /* controlled by mhi_timeout */
+	.buf_len = 0,
+	.num_channels = ARRAY_SIZE(aic100_channels),
+	.ch_cfg = aic100_channels,
+	.num_events = ARRAY_SIZE(aic100_events),
+	.event_cfg = aic100_events,
+	.use_bounce_buf = false,
+	.m2_no_db = false,
+};
+
+static int mhi_read_reg(struct mhi_controller *mhi_cntl, void __iomem *addr, u32 *out)
+{
+	u32 tmp = readl_relaxed(addr);
+
+	if (tmp == U32_MAX)
+		return -EIO;
+
+	*out = tmp;
+
+	return 0;
+}
+
+static void mhi_write_reg(struct mhi_controller *mhi_cntl, void __iomem *addr, u32 val)
+{
+	writel_relaxed(val, addr);
+}
+
+static int mhi_runtime_get(struct mhi_controller *mhi_cntl)
+{
+	return 0;
+}
+
+static void mhi_runtime_put(struct mhi_controller *mhi_cntl)
+{
+}
+
+static void mhi_status_cb(struct mhi_controller *mhi_cntl, enum mhi_callback reason)
+{
+	struct qaic_device *qdev = pci_get_drvdata(to_pci_dev(mhi_cntl->cntrl_dev));
+
+	/* this event occurs in atomic context */
+	if (reason == MHI_CB_FATAL_ERROR)
+		pci_err(qdev->pdev, "Fatal error received from device. Attempting to recover\n");
+	/* this event occurs in non-atomic context */
+	if (reason == MHI_CB_SYS_ERROR && !qdev->in_reset)
+		qaic_dev_reset_clean_local_state(qdev, true);
+}
+
+static int mhi_reset_and_async_power_up(struct mhi_controller *mhi_cntl)
+{
+	char time_sec = 1;
+	int current_ee;
+	int ret;
+
+	/* Reset the device to bring the device in PBL EE */
+	mhi_soc_reset(mhi_cntl);
+
+	/*
+	 * Keep checking the execution environment(EE) after every 1 second
+	 * interval.
+	 */
+	do {
+		msleep(1000);
+		current_ee = mhi_get_exec_env(mhi_cntl);
+	} while (current_ee != MHI_EE_PBL && time_sec++ <= MAX_RESET_TIME_SEC);
+
+	/* If the device is in PBL EE retry power up */
+	if (current_ee == MHI_EE_PBL)
+		ret = mhi_async_power_up(mhi_cntl);
+	else
+		ret = -EIO;
+
+	return ret;
+}
+
+struct mhi_controller *qaic_mhi_register_controller(struct pci_dev *pci_dev, void __iomem *mhi_bar,
+						    int mhi_irq)
+{
+	struct mhi_controller *mhi_cntl;
+	int ret;
+
+	mhi_cntl = devm_kzalloc(&pci_dev->dev, sizeof(*mhi_cntl), GFP_KERNEL);
+	if (!mhi_cntl)
+		return ERR_PTR(-ENOMEM);
+
+	mhi_cntl->cntrl_dev = &pci_dev->dev;
+
+	/*
+	 * Covers the entire possible physical ram region. Remote side is
+	 * going to calculate a size of this range, so subtract 1 to prevent
+	 * rollover.
+	 */
+	mhi_cntl->iova_start = 0;
+	mhi_cntl->iova_stop = PHYS_ADDR_MAX - 1;
+	mhi_cntl->status_cb = mhi_status_cb;
+	mhi_cntl->runtime_get = mhi_runtime_get;
+	mhi_cntl->runtime_put = mhi_runtime_put;
+	mhi_cntl->read_reg = mhi_read_reg;
+	mhi_cntl->write_reg = mhi_write_reg;
+	mhi_cntl->regs = mhi_bar;
+	mhi_cntl->reg_len = SZ_4K;
+	mhi_cntl->nr_irqs = 1;
+	mhi_cntl->irq = devm_kmalloc(&pci_dev->dev, sizeof(*mhi_cntl->irq), GFP_KERNEL);
+
+	if (!mhi_cntl->irq)
+		return ERR_PTR(-ENOMEM);
+
+	mhi_cntl->irq[0] = mhi_irq;
+	mhi_cntl->fw_image = "qcom/aic100/sbl.bin";
+
+	/* use latest configured timeout */
+	aic100_config.timeout_ms = mhi_timeout;
+	ret = mhi_register_controller(mhi_cntl, &aic100_config);
+	if (ret) {
+		pci_err(pci_dev, "mhi_register_controller failed %d\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	ret = mhi_prepare_for_power_up(mhi_cntl);
+	if (ret) {
+		pci_err(pci_dev, "mhi_prepare_for_power_up failed %d\n", ret);
+		goto prepare_power_up_fail;
+	}
+
+	ret = mhi_async_power_up(mhi_cntl);
+	/*
+	 * If EIO is returned it is possible that device is in SBL EE, which is
+	 * undesired. SOC reset the device and try to power up again.
+	 */
+	if (ret == -EIO && MHI_EE_SBL == mhi_get_exec_env(mhi_cntl)) {
+		pci_err(pci_dev, "Device is not expected to be SBL EE. SOC resetting the device to put it in PBL EE and again trying mhi async power up. Error %d\n",
+			ret);
+		ret = mhi_reset_and_async_power_up(mhi_cntl);
+	}
+
+	if (ret) {
+		pci_err(pci_dev, "mhi_async_power_up failed %d\n", ret);
+		goto power_up_fail;
+	}
+
+	return mhi_cntl;
+
+power_up_fail:
+	mhi_unprepare_after_power_down(mhi_cntl);
+prepare_power_up_fail:
+	mhi_unregister_controller(mhi_cntl);
+	return ERR_PTR(ret);
+}
+
+void qaic_mhi_free_controller(struct mhi_controller *mhi_cntl, bool link_up)
+{
+	mhi_power_down(mhi_cntl, link_up);
+	mhi_unprepare_after_power_down(mhi_cntl);
+	mhi_unregister_controller(mhi_cntl);
+}
+
+void qaic_mhi_start_reset(struct mhi_controller *mhi_cntl)
+{
+	mhi_power_down(mhi_cntl, true);
+}
+
+void qaic_mhi_reset_done(struct mhi_controller *mhi_cntl)
+{
+	struct pci_dev *pci_dev = container_of(mhi_cntl->cntrl_dev, struct pci_dev, dev);
+	int ret;
+
+	ret = mhi_async_power_up(mhi_cntl);
+	if (ret)
+		pci_err(pci_dev, "mhi_async_power_up failed after reset %d\n", ret);
+}
diff --git a/drivers/accel/qaic/mhi_controller.h b/drivers/accel/qaic/mhi_controller.h
new file mode 100644
index 0000000..c105e93
--- /dev/null
+++ b/drivers/accel/qaic/mhi_controller.h
@@ -0,0 +1,16 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only
+ *
+ * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef MHICONTROLLERQAIC_H_
+#define MHICONTROLLERQAIC_H_
+
+struct mhi_controller *qaic_mhi_register_controller(struct pci_dev *pci_dev, void __iomem *mhi_bar,
+						    int mhi_irq);
+void qaic_mhi_free_controller(struct mhi_controller *mhi_cntl, bool link_up);
+void qaic_mhi_start_reset(struct mhi_controller *mhi_cntl);
+void qaic_mhi_reset_done(struct mhi_controller *mhi_cntl);
+
+#endif /* MHICONTROLLERQAIC_H_ */