| Message ID | 1674114105-16651-3-git-send-email-quic_taozha@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add support to configure TPDM DSB subunit | expand |
On 19/01/2023 07:41, Tao Zhang wrote: > Read the DSB element size from the device tree. Set the register > bit that controls the DSB element size of the corresponding port. > > Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> > Signed-off-by: Tao Zhang <taozha@qti.qualcomm.com> > --- > drivers/hwtracing/coresight/coresight-tpda.c | 62 ++++++++++++++++++++++++++++ > drivers/hwtracing/coresight/coresight-tpda.h | 4 ++ > 2 files changed, 66 insertions(+) > > diff --git a/drivers/hwtracing/coresight/coresight-tpda.c b/drivers/hwtracing/coresight/coresight-tpda.c > index 5989798..be13e08 100644 > --- a/drivers/hwtracing/coresight/coresight-tpda.c > +++ b/drivers/hwtracing/coresight/coresight-tpda.c > @@ -37,6 +37,15 @@ static void tpda_enable_port(struct tpda_drvdata *drvdata, int port) > u32 val; > > val = readl_relaxed(drvdata->base + TPDA_Pn_CR(port)); > + /* > + * Configure aggregator port n DSB data set element size > + * Set the bit to 0 if the size is 32 > + * Set the bit to 1 if the size is 64 > + */ > + if (drvdata->dsb_esize[port] == 32) > + val &= ~TPDA_Pn_CR_DSBSIZE; > + else if (drvdata->dsb_esize[port] == 64) > + val |= TPDA_Pn_CR_DSBSIZE; What are the chances of having a value other than 32 or 64 ? What should we do in that case ? Should the driver at least give out a warning at least in the unhandled case rather than silently reusing the existing setting ? Suzuki
Hi Suzuki, Currently if the dsb_esize is not set to 32 or 64, we will not set the DSBSIZE bit of the register here. This design is really not good enough. I will change this in the next version of patch to issue a warning if an unexpected value is obtained. 在 2/22/2023 8:46 PM, Suzuki K Poulose 写道: > On 19/01/2023 07:41, Tao Zhang wrote: >> Read the DSB element size from the device tree. Set the register >> bit that controls the DSB element size of the corresponding port. >> >> Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> >> Signed-off-by: Tao Zhang <taozha@qti.qualcomm.com> >> --- >> drivers/hwtracing/coresight/coresight-tpda.c | 62 >> ++++++++++++++++++++++++++++ >> drivers/hwtracing/coresight/coresight-tpda.h | 4 ++ >> 2 files changed, 66 insertions(+) >> >> diff --git a/drivers/hwtracing/coresight/coresight-tpda.c >> b/drivers/hwtracing/coresight/coresight-tpda.c >> index 5989798..be13e08 100644 >> --- a/drivers/hwtracing/coresight/coresight-tpda.c >> +++ b/drivers/hwtracing/coresight/coresight-tpda.c >> @@ -37,6 +37,15 @@ static void tpda_enable_port(struct tpda_drvdata >> *drvdata, int port) >> u32 val; >> val = readl_relaxed(drvdata->base + TPDA_Pn_CR(port)); >> + /* >> + * Configure aggregator port n DSB data set element size >> + * Set the bit to 0 if the size is 32 >> + * Set the bit to 1 if the size is 64 >> + */ >> + if (drvdata->dsb_esize[port] == 32) >> + val &= ~TPDA_Pn_CR_DSBSIZE; >> + else if (drvdata->dsb_esize[port] == 64) >> + val |= TPDA_Pn_CR_DSBSIZE; > > What are the chances of having a value other than 32 or 64 ? > What should we do in that case ? Should the driver at least > give out a warning at least in the unhandled case rather than > silently reusing the existing setting ? > > Suzuki > Best, Tao
diff --git a/drivers/hwtracing/coresight/coresight-tpda.c b/drivers/hwtracing/coresight/coresight-tpda.c index 5989798..be13e08 100644 --- a/drivers/hwtracing/coresight/coresight-tpda.c +++ b/drivers/hwtracing/coresight/coresight-tpda.c @@ -37,6 +37,15 @@ static void tpda_enable_port(struct tpda_drvdata *drvdata, int port) u32 val; val = readl_relaxed(drvdata->base + TPDA_Pn_CR(port)); + /* + * Configure aggregator port n DSB data set element size + * Set the bit to 0 if the size is 32 + * Set the bit to 1 if the size is 64 + */ + if (drvdata->dsb_esize[port] == 32) + val &= ~TPDA_Pn_CR_DSBSIZE; + else if (drvdata->dsb_esize[port] == 64) + val |= TPDA_Pn_CR_DSBSIZE; /* Enable the port */ val |= TPDA_Pn_CR_ENA; writel_relaxed(val, drvdata->base + TPDA_Pn_CR(port)); @@ -105,6 +114,55 @@ static const struct coresight_ops tpda_cs_ops = { .link_ops = &tpda_link_ops, }; +static int tpda_parse_dsb(struct tpda_drvdata *drvdata) +{ + int len, port, i; + const __be32 *prop; + struct device_node *node = drvdata->dev->of_node; + + /* Read the size of DSB element */ + prop = of_get_property(node, "qcom,dsb-elem-size", &len); + if (prop) { + len /= sizeof(__be32); + /* + * The read set of data is port and size, so the number of data + * is a multiple of two. And the number of data will not exceed + * two times that of the TPDA inpurts number. + */ + if (len < 2 || len >= (2 * TPDA_MAX_INPORTS) || len % 2 != 0) { + dev_err(drvdata->dev, + "Dataset DSB width entries are wrong\n"); + return -EINVAL; + } + + for (i = 0; i < len; i += 2) { + port = be32_to_cpu(prop[i]); + if (port >= TPDA_MAX_INPORTS) { + dev_err(drvdata->dev, + "Wrong port specified for DSB\n"); + return -EINVAL; + } + /* Set DSB element size for corresponding port to dsb_esize*/ + drvdata->dsb_esize[port] = be32_to_cpu(prop[i + 1]); + } + } + + return 0; +} + +static int tpda_parse_of_data(struct tpda_drvdata *drvdata) +{ + int ret; + + ret = tpda_parse_dsb(drvdata); + if (ret) { + dev_err(drvdata->dev, "Fail to get DSB data set element size\n"); + return -EINVAL; + } + + return 0; +} + static int tpda_init_default_data(struct tpda_drvdata *drvdata) { int atid; @@ -151,6 +209,10 @@ static int tpda_probe(struct amba_device *adev, const struct amba_id *id) spin_lock_init(&drvdata->spinlock); + ret = tpda_parse_of_data(drvdata); + if (ret) + return ret; + ret = tpda_init_default_data(drvdata); if (ret) return ret; diff --git a/drivers/hwtracing/coresight/coresight-tpda.h b/drivers/hwtracing/coresight/coresight-tpda.h index 0399678..9ec5870 100644 --- a/drivers/hwtracing/coresight/coresight-tpda.h +++ b/drivers/hwtracing/coresight/coresight-tpda.h @@ -10,6 +10,8 @@ #define TPDA_Pn_CR(n) (0x004 + (n * 4)) /* Aggregator port enable bit */ #define TPDA_Pn_CR_ENA BIT(0) +/* Aggregator port DSB data set element size bit */ +#define TPDA_Pn_CR_DSBSIZE BIT(8) #define TPDA_MAX_INPORTS 32 @@ -23,6 +25,7 @@ * @csdev: component vitals needed by the framework. * @spinlock: lock for the drvdata value. * @enable: enable status of the component. + * @dsb_esize: DSB element size */ struct tpda_drvdata { void __iomem *base; @@ -30,6 +33,7 @@ struct tpda_drvdata { struct coresight_device *csdev; spinlock_t spinlock; u8 atid; + u32 dsb_esize[TPDA_MAX_INPORTS]; }; #endif /* _CORESIGHT_CORESIGHT_TPDA_H */