| Message ID | 1663133102-10671-3-git-send-email-quic_deesin@quicinc.com |
|---|---|
| State | New |
| Headers | show |
| Series | rpmsg signaling/flowcontrol patches | expand |
On Wed, Sep 14, 2022 at 10:55:01AM +0530, Deepak Kumar Singh wrote: > Remote peripherals send signal notifications over glink with commandID 15. > > Add support to send and receive the signal command and based signals > enable or disable flow control with remote host. > > Signed-off-by: Chris Lew <quic_clew@quicinc.com> > Signed-off-by: Deepak Kumar Singh <quic_deesin@quicinc.com> > --- > drivers/rpmsg/qcom_glink_native.c | 63 +++++++++++++++++++++++++++++++++++++++ > 1 file changed, 63 insertions(+) > > diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c > index 115c0a1..01ee82a 100644 > --- a/drivers/rpmsg/qcom_glink_native.c > +++ b/drivers/rpmsg/qcom_glink_native.c > @@ -17,6 +17,7 @@ > #include <linux/rpmsg.h> > #include <linux/sizes.h> > #include <linux/slab.h> > +#include <linux/termios.h> > #include <linux/workqueue.h> > #include <linux/mailbox_client.h> > > @@ -203,9 +204,15 @@ static const struct rpmsg_endpoint_ops glink_endpoint_ops; > #define RPM_CMD_TX_DATA_CONT 12 > #define RPM_CMD_READ_NOTIF 13 > #define RPM_CMD_RX_DONE_W_REUSE 14 > +#define RPM_CMD_SIGNALS 15 > > #define GLINK_FEATURE_INTENTLESS BIT(1) > > +#define NATIVE_DTR_SIG NATIVE_DSR_SIG > +#define NATIVE_DSR_SIG BIT(31) > +#define NATIVE_RTS_SIG NATIVE_CTS_SIG > +#define NATIVE_CTS_SIG BIT(30) > + > static void qcom_glink_rx_done_work(struct work_struct *work); > > static struct glink_channel *qcom_glink_alloc_channel(struct qcom_glink *glink, > @@ -1001,6 +1008,57 @@ static int qcom_glink_rx_open_ack(struct qcom_glink *glink, unsigned int lcid) > return 0; > } > > +/** > + * qcom_glink_set_flow_control() - convert a signal cmd to wire format and > + * transmit > + * @ept: Rpmsg endpoint for channel. > + * @enable: True/False - enable or disable flow control > + * > + * Return: 0 on success or standard Linux error code. > + */ > +static int qcom_glink_set_flow_control(struct rpmsg_endpoint *ept, bool enable) > +{ > + struct glink_channel *channel = to_glink_channel(ept); > + struct qcom_glink *glink = channel->glink; > + struct glink_msg msg; > + u32 sigs; sigs needs to be zero-initialized. > + > + if (enable) > + sigs |= NATIVE_DTR_SIG | NATIVE_RTS_SIG; > + > + msg.cmd = cpu_to_le16(RPM_CMD_SIGNALS); > + msg.param1 = cpu_to_le16(channel->lcid); > + msg.param2 = cpu_to_le32(sigs); > + > + return qcom_glink_tx(glink, &msg, sizeof(msg), NULL, 0, true); > +} > + > +static int qcom_glink_handle_signals(struct qcom_glink *glink, > + unsigned int rcid, unsigned int sigs) > +{ > + struct glink_channel *channel; > + unsigned long flags; > + bool enable = false; > + > + spin_lock_irqsave(&glink->idr_lock, flags); > + channel = idr_find(&glink->rcids, rcid); > + spin_unlock_irqrestore(&glink->idr_lock, flags); > + if (!channel) { > + dev_err(glink->dev, "signal for non-existing channel\n"); > + return -EINVAL; > + } > + > + if (!channel->ept.flow_cb) > + return 0; > + > + if (sigs & (NATIVE_DSR_SIG | NATIVE_CTS_SIG)) > + enable = true; > + There are two stray tabs on this line. Regards, Bjorn > + channel->ept.flow_cb(channel->ept.rpdev, channel->ept.priv, enable); > + > + return 0; > +} > + > static irqreturn_t qcom_glink_native_intr(int irq, void *data) > { > struct qcom_glink *glink = data; > @@ -1065,6 +1123,10 @@ static irqreturn_t qcom_glink_native_intr(int irq, void *data) > qcom_glink_handle_intent_req_ack(glink, param1, param2); > qcom_glink_rx_advance(glink, ALIGN(sizeof(msg), 8)); > break; > + case RPM_CMD_SIGNALS: > + qcom_glink_handle_signals(glink, param1, param2); > + qcom_glink_rx_advance(glink, ALIGN(sizeof(msg), 8)); > + break; > default: > dev_err(glink->dev, "unhandled rx cmd: %d\n", cmd); > ret = -EINVAL; > @@ -1440,6 +1502,7 @@ static const struct rpmsg_endpoint_ops glink_endpoint_ops = { > .sendto = qcom_glink_sendto, > .trysend = qcom_glink_trysend, > .trysendto = qcom_glink_trysendto, > + .set_flow_control = qcom_glink_set_flow_control, > }; > > static void qcom_glink_rpdev_release(struct device *dev) > -- > 2.7.4 >
diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c index 115c0a1..01ee82a 100644 --- a/drivers/rpmsg/qcom_glink_native.c +++ b/drivers/rpmsg/qcom_glink_native.c @@ -17,6 +17,7 @@ #include <linux/rpmsg.h> #include <linux/sizes.h> #include <linux/slab.h> +#include <linux/termios.h> #include <linux/workqueue.h> #include <linux/mailbox_client.h> @@ -203,9 +204,15 @@ static const struct rpmsg_endpoint_ops glink_endpoint_ops; #define RPM_CMD_TX_DATA_CONT 12 #define RPM_CMD_READ_NOTIF 13 #define RPM_CMD_RX_DONE_W_REUSE 14 +#define RPM_CMD_SIGNALS 15 #define GLINK_FEATURE_INTENTLESS BIT(1) +#define NATIVE_DTR_SIG NATIVE_DSR_SIG +#define NATIVE_DSR_SIG BIT(31) +#define NATIVE_RTS_SIG NATIVE_CTS_SIG +#define NATIVE_CTS_SIG BIT(30) + static void qcom_glink_rx_done_work(struct work_struct *work); static struct glink_channel *qcom_glink_alloc_channel(struct qcom_glink *glink, @@ -1001,6 +1008,57 @@ static int qcom_glink_rx_open_ack(struct qcom_glink *glink, unsigned int lcid) return 0; } +/** + * qcom_glink_set_flow_control() - convert a signal cmd to wire format and + * transmit + * @ept: Rpmsg endpoint for channel. + * @enable: True/False - enable or disable flow control + * + * Return: 0 on success or standard Linux error code. + */ +static int qcom_glink_set_flow_control(struct rpmsg_endpoint *ept, bool enable) +{ + struct glink_channel *channel = to_glink_channel(ept); + struct qcom_glink *glink = channel->glink; + struct glink_msg msg; + u32 sigs; + + if (enable) + sigs |= NATIVE_DTR_SIG | NATIVE_RTS_SIG; + + msg.cmd = cpu_to_le16(RPM_CMD_SIGNALS); + msg.param1 = cpu_to_le16(channel->lcid); + msg.param2 = cpu_to_le32(sigs); + + return qcom_glink_tx(glink, &msg, sizeof(msg), NULL, 0, true); +} + +static int qcom_glink_handle_signals(struct qcom_glink *glink, + unsigned int rcid, unsigned int sigs) +{ + struct glink_channel *channel; + unsigned long flags; + bool enable = false; + + spin_lock_irqsave(&glink->idr_lock, flags); + channel = idr_find(&glink->rcids, rcid); + spin_unlock_irqrestore(&glink->idr_lock, flags); + if (!channel) { + dev_err(glink->dev, "signal for non-existing channel\n"); + return -EINVAL; + } + + if (!channel->ept.flow_cb) + return 0; + + if (sigs & (NATIVE_DSR_SIG | NATIVE_CTS_SIG)) + enable = true; + + channel->ept.flow_cb(channel->ept.rpdev, channel->ept.priv, enable); + + return 0; +} + static irqreturn_t qcom_glink_native_intr(int irq, void *data) { struct qcom_glink *glink = data; @@ -1065,6 +1123,10 @@ static irqreturn_t qcom_glink_native_intr(int irq, void *data) qcom_glink_handle_intent_req_ack(glink, param1, param2); qcom_glink_rx_advance(glink, ALIGN(sizeof(msg), 8)); break; + case RPM_CMD_SIGNALS: + qcom_glink_handle_signals(glink, param1, param2); + qcom_glink_rx_advance(glink, ALIGN(sizeof(msg), 8)); + break; default: dev_err(glink->dev, "unhandled rx cmd: %d\n", cmd); ret = -EINVAL; @@ -1440,6 +1502,7 @@ static const struct rpmsg_endpoint_ops glink_endpoint_ops = { .sendto = qcom_glink_sendto, .trysend = qcom_glink_trysend, .trysendto = qcom_glink_trysendto, + .set_flow_control = qcom_glink_set_flow_control, }; static void qcom_glink_rpdev_release(struct device *dev)