diff mbox series

[v7,3/4] arm64: dts: qcom: sdm845: Add interconnect properties for USB

Message ID 1585718145-29537-4-git-send-email-sanm@codeaurora.org
State Superseded
Headers show
Series [v7,1/4] dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver | expand

Commit Message

Sandeep Maheswaram April 1, 2020, 5:15 a.m. UTC 
Populate USB DT nodes with interconnect properties.

Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 8f926b5..860d5c2 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3097,6 +3097,10 @@ 
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
+			interconnects = <&aggre2_noc MASTER_USB3_0 &mem_noc SLAVE_EBI1>,
+					<&gladiator_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3_0>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
 			usb_1_dwc3: dwc3@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a600000 0 0xcd00>;
@@ -3141,6 +3145,10 @@ 
 
 			resets = <&gcc GCC_USB30_SEC_BCR>;
 
+			interconnects = <&aggre2_noc MASTER_USB3_1 &mem_noc SLAVE_EBI1>,
+					<&gladiator_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3_1>;
+			interconnect-names = "usb-ddr", "apps-usb";
+
 			usb_2_dwc3: dwc3@a800000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a800000 0 0xcd00>;