@@ -557,6 +557,26 @@ static int geni_i2c_probe(struct platform_device *pdev)
gi2c->adap.dev.of_node = dev->of_node;
strlcpy(gi2c->adap.name, "Geni-I2C", sizeof(gi2c->adap.name));
+ ret = geni_icc_get(&gi2c->se, "qup-core", "qup-config", "qup-memory");
+ if (ret)
+ return ret;
+ /*
+ * Set the bus quota for core and cpu to a reasonable value for
+ * register access.
+ * Set quota for DDR based on bus speed, assume peak requirement
+ * as twice of avg bw.
+ */
+ gi2c->se.to_core.avg_bw = GENI_DEFAULT_BW;
+ gi2c->se.to_core.peak_bw = Bps_to_icc(CORE_2X_100_MHZ);
+ gi2c->se.from_cpu.avg_bw = GENI_DEFAULT_BW;
+ gi2c->se.from_cpu.peak_bw = GENI_DEFAULT_BW;
+ gi2c->se.to_ddr.avg_bw = Bps_to_icc(gi2c->clk_freq_out);
+ gi2c->se.to_ddr.peak_bw = Bps_to_icc(2 * gi2c->clk_freq_out);
+
+ ret = geni_icc_vote_on(&gi2c->se);
+ if (ret)
+ return ret;
+
ret = geni_se_resources_on(&gi2c->se);
if (ret) {
dev_err(dev, "Error turning on resources %d\n", ret);
@@ -579,6 +599,10 @@ static int geni_i2c_probe(struct platform_device *pdev)
return ret;
}
+ ret = geni_icc_vote_off(&gi2c->se);
+ if (ret)
+ return ret;
+
dev_dbg(dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth);
gi2c->suspended = 1;
@@ -623,7 +647,7 @@ static int __maybe_unused geni_i2c_runtime_suspend(struct device *dev)
gi2c->suspended = 1;
}
- return 0;
+ return geni_icc_vote_off(&gi2c->se);
}
static int __maybe_unused geni_i2c_runtime_resume(struct device *dev)
@@ -631,6 +655,10 @@ static int __maybe_unused geni_i2c_runtime_resume(struct device *dev)
int ret;
struct geni_i2c_dev *gi2c = dev_get_drvdata(dev);
+ ret = geni_icc_vote_on(&gi2c->se);
+ if (ret)
+ return ret;
+
ret = geni_se_resources_on(&gi2c->se);
if (ret)
return ret;
Get the interconnect paths for I2C based Serial Engine device and vote according to the bus speed of the driver. Signed-off-by: Akash Asthana <akashast@codeaurora.org> --- Changes in V2: - As per Bjorn's comment, removed se == NULL check from geni_i2c_icc_get - As per Bjorn's comment, removed code to set se->icc_path* to NULL in failure - As per Bjorn's comment, introduced and using devm_of_icc_get API for getting path handle - As per Matthias comment, added error handling for icc_set_bw call Changes in V3: - As per Matthias comment, use common library APIs defined in geni-se driver for ICC functionality. drivers/i2c/busses/i2c-qcom-geni.c | 30 +++++++++++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-)