From patchwork Fri Nov 21 18:03:54 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Lina Iyer X-Patchwork-Id: 41343 Return-Path: X-Original-To: linaro@patches.linaro.org Delivered-To: linaro@patches.linaro.org Received: from mail-lb0-f197.google.com (mail-lb0-f197.google.com [209.85.217.197]) by ip-10-151-82-157.ec2.internal (Postfix) with ESMTPS id 4F6EE23C27 for ; Fri, 21 Nov 2014 18:04:39 +0000 (UTC) Received: by mail-lb0-f197.google.com with SMTP id b6sf3358633lbj.8 for ; Fri, 21 Nov 2014 10:04:37 -0800 (PST) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:mime-version:delivered-to:from:to:cc:subject :date:message-id:in-reply-to:references:sender:precedence:list-id :x-original-sender:x-original-authentication-results:mailing-list :list-post:list-help:list-archive:list-unsubscribe; bh=Vj27pOh2+eOmU3QErqpJy9HW/fh8K7pcHsUSLJ8/et0=; b=jisS0/zCsYgESAWO01VBofJiPqZBWwo4Kg8vNU9yG/NnFV7FT6UYWVCw+edlrxIL8e WHrAhe+PmjMNWT18aIFjfH46lwR/10ARsgwBjDySpyw59xWXJCeTHyBA7rAnfDMZICBM o+Z1iU0nTa71T0M+W9fQt/KOExa7gNyFwOrasNQ9w4LKIXYuoEVEGbB3R7nWdnUyezWY mf50dv8D9dzRDv1s2dwGVT+Jwgzt5anNqXUkzTTkgqHmFYt0GMqkY2UpV5MhwZwbMhSK xzj6baH+VIBSocI2moccHyF4UWYxxqURNpVkMvELErpHaiA7+AbEcCTNrZDQxFxfi7S5 rEug== X-Gm-Message-State: ALoCoQkIqxugaCtLz49fenGqSLGzCf4bhwBGyjheO5xFdiT+4EmchlawNA7Te+a6r6v9kb8hLTkg X-Received: by 10.112.147.131 with SMTP id tk3mr1989683lbb.2.1416593075060; Fri, 21 Nov 2014 10:04:35 -0800 (PST) MIME-Version: 1.0 X-BeenThere: patchwork-forward@linaro.org Received: by 10.152.37.6 with SMTP id u6ls211020laj.26.gmail; Fri, 21 Nov 2014 10:04:34 -0800 (PST) X-Received: by 10.112.161.202 with SMTP id xu10mr5595080lbb.94.1416593074243; Fri, 21 Nov 2014 10:04:34 -0800 (PST) Received: from mail-lb0-f172.google.com (mail-lb0-f172.google.com. [209.85.217.172]) by mx.google.com with ESMTPS id j9si6815922lab.13.2014.11.21.10.04.32 for (version=TLSv1 cipher=ECDHE-RSA-RC4-SHA bits=128/128); Fri, 21 Nov 2014 10:04:32 -0800 (PST) Received-SPF: temperror (google.com: error in processing during lookup of patch+caf_=patchwork-forward=linaro.org@linaro.org: DNS timeout) client-ip=209.85.217.172; Received: by mail-lb0-f172.google.com with SMTP id u10so4501075lbd.17 for ; Fri, 21 Nov 2014 10:04:32 -0800 (PST) X-Received: by 10.112.189.10 with SMTP id ge10mr6709134lbc.23.1416593072339; Fri, 21 Nov 2014 10:04:32 -0800 (PST) X-Forwarded-To: patchwork-forward@linaro.org X-Forwarded-For: patch@linaro.org patchwork-forward@linaro.org Delivered-To: patch@linaro.org Received: by 10.112.184.201 with SMTP id ew9csp138591lbc; Fri, 21 Nov 2014 10:04:31 -0800 (PST) X-Received: by 10.66.255.100 with SMTP id ap4mr9142003pad.133.1416593063266; Fri, 21 Nov 2014 10:04:23 -0800 (PST) Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id xj9si10077613pab.73.2014.11.21.10.04.22 for ; Fri, 21 Nov 2014 10:04:23 -0800 (PST) Received-SPF: none (google.com: devicetree-owner@vger.kernel.org does not designate permitted sender hosts) client-ip=209.132.180.67; Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751284AbaKUSEU (ORCPT + 4 others); Fri, 21 Nov 2014 13:04:20 -0500 Received: from mail-pa0-f45.google.com ([209.85.220.45]:65186 "EHLO mail-pa0-f45.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751265AbaKUSEQ (ORCPT ); Fri, 21 Nov 2014 13:04:16 -0500 Received: by mail-pa0-f45.google.com with SMTP id lj1so5325665pab.18 for ; Fri, 21 Nov 2014 10:04:15 -0800 (PST) X-Received: by 10.69.16.99 with SMTP id fv3mr9483148pbd.43.1416593055667; Fri, 21 Nov 2014 10:04:15 -0800 (PST) Received: from ubuntu.localdomain (pat_11.qualcomm.com. [192.35.156.11]) by mx.google.com with ESMTPSA id qh4sm5411466pbb.35.2014.11.21.10.04.13 for (version=TLSv1.2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Fri, 21 Nov 2014 10:04:14 -0800 (PST) From: Lina Iyer To: daniel.lezcano@linaro.org, khilman@linaro.org, sboyd@codeaurora.org, galak@codeaurora.org, linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: lorenzo.pieralisi@arm.com, msivasub@codeaurora.org, devicetree@vger.kernel.org, Lina Iyer Subject: [PATCH v10 07/10] qcom: cpuidle: Add cpuidle driver for QCOM cpus Date: Fri, 21 Nov 2014 11:03:54 -0700 Message-Id: <1416593037-27527-8-git-send-email-lina.iyer@linaro.org> X-Mailer: git-send-email 2.1.0 In-Reply-To: <1416593037-27527-1-git-send-email-lina.iyer@linaro.org> References: <1416593037-27527-1-git-send-email-lina.iyer@linaro.org> Sender: devicetree-owner@vger.kernel.org Precedence: list List-ID: X-Mailing-List: devicetree@vger.kernel.org X-Removed-Original-Auth: Dkim didn't pass. X-Original-Sender: lina.iyer@linaro.org X-Original-Authentication-Results: mx.google.com; spf=temperror (google.com: error in processing during lookup of patch+caf_=patchwork-forward=linaro.org@linaro.org: DNS timeout) smtp.mail=patch+caf_=patchwork-forward=linaro.org@linaro.org Mailing-list: list patchwork-forward@linaro.org; contact patchwork-forward+owners@linaro.org X-Google-Group-Id: 836684582541 List-Post: , List-Help: , List-Archive: List-Unsubscribe: , Add cpuidle driver interface to allow cpus to go into C-States. Use the cpuidle DT interface, common across ARM architectures, to provide the idle state information to the cpuidle framework. Supported modes at this time are Standby and Standalone Power Collapse. Signed-off-by: Lina Iyer Acked-by: Daniel Lezcano --- .../bindings/arm/msm/qcom,idle-state.txt | 81 ++++++++++++++++++++++ drivers/cpuidle/Kconfig.arm | 7 ++ drivers/cpuidle/Makefile | 1 + drivers/cpuidle/cpuidle-qcom.c | 72 +++++++++++++++++++ 4 files changed, 161 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt create mode 100644 drivers/cpuidle/cpuidle-qcom.c diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt b/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt new file mode 100644 index 0000000..ae1b07f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt @@ -0,0 +1,81 @@ +QCOM Idle States for cpuidle driver + +ARM provides idle-state node to define the cpuidle states, as defined in [1]. +cpuidle-qcom is the cpuidle driver for Qualcomm SoCs and uses these idle +states. Idle states have different enter/exit latency and residency values. +The idle states supported by the QCOM SoC are defined as - + + * Standby + * Retention + * Standalone Power Collapse (Standalone PC or SPC) + * Power Collapse (PC) + +Standby: Standby does a little more in addition to architectural clock gating. +When the WFI instruction is executed the ARM core would gate its internal +clocks. In addition to gating the clocks, QCOM cpus use this instruction as a +trigger to execute the SPM state machine. The SPM state machine waits for the +interrupt to trigger the core back in to active. This triggers the cache +hierarchy to enter standby states, when all cpus are idle. An interrupt brings +the SPM state machine out of its wait, the next step is to ensure that the +cache hierarchy is also out of standby, and then the cpu is allowed to resume +execution. + +Retention: Retention is a low power state where the core is clock gated and +the memory and the registers associated with the core are retained. The +voltage may be reduced to the minimum value needed to keep the processor +registers active. The SPM should be configured to execute the retention +sequence and would wait for interrupt, before restoring the cpu to execution +state. Retention may have a slightly higher latency than Standby. + +Standalone PC: A cpu can power down and warmboot if there is a sufficient time +between the time it enters idle and the next known wake up. SPC mode is used +to indicate a core entering a power down state without consulting any other +cpu or the system resources. This helps save power only on that core. The SPM +sequence for this idle state is programmed to power down the supply to the +core, wait for the interrupt, restore power to the core, and ensure the +system state including cache hierarchy is ready before allowing core to +resume. Applying power and resetting the core causes the core to warmboot +back into Elevation Level (EL) which trampolines the control back to the +kernel. Entering a power down state for the cpu, needs to be done by trapping +into a EL. Failing to do so, would result in a crash enforced by the warm boot +code in the EL for the SoC. On SoCs with write-back L1 cache, the cache has to +be flushed in s/w, before powering down the core. + +Power Collapse: This state is similar to the SPC mode, but distinguishes +itself in that the cpu acknowledges and permits the SoC to enter deeper sleep +modes. In a hierarchical power domain SoC, this means L2 and other caches can +be flushed, system bus, clocks - lowered, and SoC main XO clock gated and +voltages reduced, provided all cpus enter this state. Since the span of low +power modes possible at this state is vast, the exit latency and the residency +of this low power mode would be considered high even though at a cpu level, +this essentially is cpu power down. The SPM in this state also may handshake +with the Resource power manager processor in the SoC to indicate a complete +application processor subsystem shut down. + +The idle-state for QCOM SoCs are distinguished by the compatible property of +the idle-states device node. +The devicetree representation of the idle state should be - + +Required properties: + +- compatible: Must be one of - + "qcom,idle-state-stby", + "qcom,idle-state-ret", + "qcom,idle-state-spc", + "qcom,idle-state-pc", + and "arm,idle-state". + +Other required and optional properties are specified in [1]. + +Example: + + idle-states { + CPU_SPC: spc { + compatible = "qcom,idle-state-spc", "arm,idle-state"; + entry-latency-us = <150>; + exit-latency-us = <200>; + min-residency-us = <2000>; + }; + }; + +[1]. Documentation/devicetree/bindings/arm/idle-states.txt diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm index 8c16ab2..e98993c 100644 --- a/drivers/cpuidle/Kconfig.arm +++ b/drivers/cpuidle/Kconfig.arm @@ -63,3 +63,10 @@ config ARM_MVEBU_V7_CPUIDLE depends on ARCH_MVEBU help Select this to enable cpuidle on Armada 370, 38x and XP processors. + +config ARM_QCOM_CPUIDLE + bool "CPU Idle drivers for Qualcomm processors" + depends on ARCH_QCOM + select DT_IDLE_STATES + help + Select this to enable cpuidle for QCOM processors diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile index 4d177b9..6c222d5 100644 --- a/drivers/cpuidle/Makefile +++ b/drivers/cpuidle/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_ARM_ZYNQ_CPUIDLE) += cpuidle-zynq.o obj-$(CONFIG_ARM_U8500_CPUIDLE) += cpuidle-ux500.o obj-$(CONFIG_ARM_AT91_CPUIDLE) += cpuidle-at91.o obj-$(CONFIG_ARM_EXYNOS_CPUIDLE) += cpuidle-exynos.o +obj-$(CONFIG_ARM_QCOM_CPUIDLE) += cpuidle-qcom.o ############################################################################### # MIPS drivers diff --git a/drivers/cpuidle/cpuidle-qcom.c b/drivers/cpuidle/cpuidle-qcom.c new file mode 100644 index 0000000..1c1dcbc --- /dev/null +++ b/drivers/cpuidle/cpuidle-qcom.c @@ -0,0 +1,72 @@ +/* + * Copyright (c) 2014, Linaro Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include + +#include +#include "dt_idle_states.h" + +static struct qcom_cpu_pm_ops *lpm_ops; + +static int qcom_cpu_stby(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + lpm_ops->standby(NULL); + + return index; +} + +static int qcom_cpu_spc(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + lpm_ops->spc(NULL); + + return index; +} + +static struct cpuidle_driver qcom_cpuidle_driver = { + .name = "qcom_cpuidle", +}; + +static const struct of_device_id qcom_idle_state_match[] = { + { .compatible = "qcom,idle-state-stby", .data = qcom_cpu_stby}, + { .compatible = "qcom,idle-state-spc", .data = qcom_cpu_spc }, + { }, +}; + +static int qcom_cpuidle_probe(struct platform_device *pdev) +{ + struct cpuidle_driver *drv = &qcom_cpuidle_driver; + int ret; + + lpm_ops = pdev->dev.platform_data; + + /* Probe for other states, including standby */ + ret = dt_init_idle_driver(drv, qcom_idle_state_match, 0); + if (ret < 0) + return ret; + + return cpuidle_register(drv, NULL); +} + +static struct platform_driver qcom_cpuidle_plat_driver = { + .probe = qcom_cpuidle_probe, + .driver = { + .name = "qcom_cpuidle", + }, +}; + +module_platform_driver(qcom_cpuidle_plat_driver);