| Message ID | cover.1680162377.git.quic_varada@quicinc.com |
|---|---|
| Headers | show |
| Series | Enable IPQ9754 USB | expand |
On Thu, 30 Mar 2023 at 11:42, Varadarajan Narayanan <quic_varada@quicinc.com> wrote: > > Updated USB QMP PHY Init sequence based on HPG for IPQ9574. > Reused clock and reset list from existing targets. > > Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > --- > Changes in v5: > - Fix additional review comments > - Use V3 register offsets > Changes in v4: > - Use qmp_usb_offsets for register space access > Changes in v3: > - Fix hex captitalization > Changes in v2: > - Removed unused phy register offsets > - Moved the clock entries to the correct place > - Maintain sorted order > --- > drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 115 ++++++++++++++++++++++++++++++++ > 1 file changed, 115 insertions(+) > > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c > index a49711c..77041dd 100644 > --- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c > @@ -139,6 +139,88 @@ static const unsigned int qmp_v5_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = { > [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR, > }; > > +static const struct qmp_phy_init_tbl ipq9574_usb3_serdes_tbl[] = { > + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a), > + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08), > + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30), > + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f), > + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b), > + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01), > + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00), > + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06), > + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f), > + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06), > + /* PLL and Loop filter settings */ > + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x68), > + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0xab), > + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0xaa), > + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x02), > + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x09), > + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16), > + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28), > + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0xa0), > + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xaa), > + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x29), > + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00), > + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00), > + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00), > + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00), > + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a), > + /* SSC settings */ > + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01), > + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x7d), > + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01), > + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00), > + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00), > + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x0a), > + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x05), > +}; > + > +static const struct qmp_phy_init_tbl ipq9574_usb3_tx_tbl[] = { > + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45), > + QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12), > + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06), > +}; > + > +static const struct qmp_phy_init_tbl ipq9574_usb3_rx_tbl[] = { > + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x06), > + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02), > + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x6c), > + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c), > + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xb8), > + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77), > + QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80), > + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03), > + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16), > + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x0c), > +}; > + > +static const struct qmp_phy_init_tbl ipq9574_usb3_pcs_tbl[] = { > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15), > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0e), > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83), > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02), > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09), > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2), > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85), > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1), > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f), > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47), > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b), > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75), > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13), > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86), > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04), > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44), > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7), > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03), > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40), > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00), > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88), > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17), > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f), > +}; > + > static const struct qmp_phy_init_tbl ipq8074_usb3_serdes_tbl[] = { > QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a), > QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08), > @@ -1558,6 +1640,14 @@ static const char * const qmp_phy_vreg_l[] = { > "vdda-phy", "vdda-pll", > }; > > +static const struct qmp_usb_offsets qmp_usb_offsets_ipq9574 = { > + .serdes = 0, > + .pcs = 0x800, > + .pcs_usb = 0, No, pcs_usb is not 0. > + .tx = 0x200, > + .rx = 0x400, > +}; > + > static const struct qmp_usb_offsets qmp_usb_offsets_v5 = { > .serdes = 0, > .pcs = 0x0200, > @@ -1586,6 +1676,28 @@ static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = { > .regs = qmp_v3_usb3phy_regs_layout, > }; > > +static const struct qmp_phy_cfg ipq9574_usb3phy_cfg = { > + .lanes = 1, > + > + .offsets = &qmp_usb_offsets_ipq9574, > + > + .serdes_tbl = ipq9574_usb3_serdes_tbl, > + .serdes_tbl_num = ARRAY_SIZE(ipq9574_usb3_serdes_tbl), > + .tx_tbl = ipq9574_usb3_tx_tbl, > + .tx_tbl_num = ARRAY_SIZE(ipq9574_usb3_tx_tbl), > + .rx_tbl = ipq9574_usb3_rx_tbl, > + .rx_tbl_num = ARRAY_SIZE(ipq9574_usb3_rx_tbl), > + .pcs_tbl = ipq9574_usb3_pcs_tbl, > + .pcs_tbl_num = ARRAY_SIZE(ipq9574_usb3_pcs_tbl), > + .clk_list = qmp_v4_phy_clk_l, > + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l), > + .reset_list = qcm2290_usb3phy_reset_l, > + .num_resets = ARRAY_SIZE(qcm2290_usb3phy_reset_l), > + .vreg_list = qmp_phy_vreg_l, > + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), > + .regs = qmp_v3_usb3phy_regs_layout, > +}; > + > static const struct qmp_phy_cfg msm8996_usb3phy_cfg = { > .lanes = 1, > > @@ -2589,6 +2701,9 @@ static const struct of_device_id qmp_usb_of_match_table[] = { > .compatible = "qcom,ipq8074-qmp-usb3-phy", > .data = &ipq8074_usb3phy_cfg, > }, { > + .compatible = "qcom,ipq9574-qmp-usb3-phy", > + .data = &ipq9574_usb3phy_cfg, > + }, { > .compatible = "qcom,msm8996-qmp-usb3-phy", > .data = &msm8996_usb3phy_cfg, > }, { > -- > 2.7.4 >
On Thu, Mar 30, 2023 at 12:41:08PM +0300, Dmitry Baryshkov wrote: > On Thu, 30 Mar 2023 at 11:42, Varadarajan Narayanan > <quic_varada@quicinc.com> wrote: > > > > Updated USB QMP PHY Init sequence based on HPG for IPQ9574. > > Reused clock and reset list from existing targets. > > > > Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com> > > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > > --- > > Changes in v5: > > - Fix additional review comments > > - Use V3 register offsets > > Changes in v4: > > - Use qmp_usb_offsets for register space access > > Changes in v3: > > - Fix hex captitalization > > Changes in v2: > > - Removed unused phy register offsets > > - Moved the clock entries to the correct place > > - Maintain sorted order > > --- > > drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 115 ++++++++++++++++++++++++++++++++ > > 1 file changed, 115 insertions(+) > > > > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c > > index a49711c..77041dd 100644 > > --- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c > > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c > > @@ -139,6 +139,88 @@ static const unsigned int qmp_v5_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = { > > [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR, > > }; > > > > +static const struct qmp_phy_init_tbl ipq9574_usb3_serdes_tbl[] = { > > + QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a), > > + QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08), > > + QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30), > > + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f), > > + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b), > > + QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01), > > + QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00), > > + QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06), > > + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f), > > + QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06), > > + /* PLL and Loop filter settings */ > > + QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x68), > > + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0xab), > > + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0xaa), > > + QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x02), > > + QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x09), > > + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16), > > + QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28), > > + QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0xa0), > > + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xaa), > > + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x29), > > + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00), > > + QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00), > > + QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00), > > + QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00), > > + QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a), > > + /* SSC settings */ > > + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01), > > + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x7d), > > + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01), > > + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00), > > + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00), > > + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x0a), > > + QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x05), > > +}; > > + > > +static const struct qmp_phy_init_tbl ipq9574_usb3_tx_tbl[] = { > > + QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45), > > + QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12), > > + QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06), > > +}; > > + > > +static const struct qmp_phy_init_tbl ipq9574_usb3_rx_tbl[] = { > > + QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x06), > > + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02), > > + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x6c), > > + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c), > > + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xb8), > > + QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77), > > + QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80), > > + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03), > > + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16), > > + QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x0c), > > +}; > > + > > +static const struct qmp_phy_init_tbl ipq9574_usb3_pcs_tbl[] = { > > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15), > > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0e), > > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83), > > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02), > > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09), > > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2), > > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85), > > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1), > > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f), > > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47), > > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b), > > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75), > > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13), > > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86), > > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04), > > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44), > > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7), > > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03), > > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40), > > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00), > > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88), > > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17), > > + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f), > > +}; > > + > > static const struct qmp_phy_init_tbl ipq8074_usb3_serdes_tbl[] = { > > QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a), > > QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08), > > @@ -1558,6 +1640,14 @@ static const char * const qmp_phy_vreg_l[] = { > > "vdda-phy", "vdda-pll", > > }; > > > > +static const struct qmp_usb_offsets qmp_usb_offsets_ipq9574 = { > > + .serdes = 0, > > + .pcs = 0x800, > > + .pcs_usb = 0, > > No, pcs_usb is not 0. Not sure I understand this comment. Since IPQ9574 uses new style DT entries, pcs_usb_offset = 0 and that will not be used. qmp->pcs_usb is used in qmp_usb_enable_autonomous_mode and qmp_usb_disable_autonomous_mode. If "qmp->pcs_usb == 0", those functions use the value of qmp->pcs (0x7d800) for pcs_usb. The registers used in these functions are QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR & QPHY_PCS_AUTONOMOUS_MODE_CTRL The offsets for the above registers as specified in qmp_v3_usb3phy_regs_layout is #define QPHY_V3_PCS_AUTONOMOUS_MODE_CTRL 0x0d8 #define QPHY_V3_PCS_LFPS_RXTERM_IRQ_CLEAR 0x0dc qphy_{set|clr}bits called from qmp_usb_enable_autonomous_mode and qmp_usb_disable_autonomous_mode will use the offset 0x7d8d8 and 0x78d8c. This offset matches with the register offset document of the IPQ9574. So, felt setting pcs_usb to zero should be ok. Can you please clarify. Thanks Varada > > > + .tx = 0x200, > > + .rx = 0x400, > > +}; > > + > > static const struct qmp_usb_offsets qmp_usb_offsets_v5 = { > > .serdes = 0, > > .pcs = 0x0200, > > @@ -1586,6 +1676,28 @@ static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = { > > .regs = qmp_v3_usb3phy_regs_layout, > > }; > > > > +static const struct qmp_phy_cfg ipq9574_usb3phy_cfg = { > > + .lanes = 1, > > + > > + .offsets = &qmp_usb_offsets_ipq9574, > > + > > + .serdes_tbl = ipq9574_usb3_serdes_tbl, > > + .serdes_tbl_num = ARRAY_SIZE(ipq9574_usb3_serdes_tbl), > > + .tx_tbl = ipq9574_usb3_tx_tbl, > > + .tx_tbl_num = ARRAY_SIZE(ipq9574_usb3_tx_tbl), > > + .rx_tbl = ipq9574_usb3_rx_tbl, > > + .rx_tbl_num = ARRAY_SIZE(ipq9574_usb3_rx_tbl), > > + .pcs_tbl = ipq9574_usb3_pcs_tbl, > > + .pcs_tbl_num = ARRAY_SIZE(ipq9574_usb3_pcs_tbl), > > + .clk_list = qmp_v4_phy_clk_l, > > + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l), > > + .reset_list = qcm2290_usb3phy_reset_l, > > + .num_resets = ARRAY_SIZE(qcm2290_usb3phy_reset_l), > > + .vreg_list = qmp_phy_vreg_l, > > + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), > > + .regs = qmp_v3_usb3phy_regs_layout, > > +}; > > + > > static const struct qmp_phy_cfg msm8996_usb3phy_cfg = { > > .lanes = 1, > > > > @@ -2589,6 +2701,9 @@ static const struct of_device_id qmp_usb_of_match_table[] = { > > .compatible = "qcom,ipq8074-qmp-usb3-phy", > > .data = &ipq8074_usb3phy_cfg, > > }, { > > + .compatible = "qcom,ipq9574-qmp-usb3-phy", > > + .data = &ipq9574_usb3phy_cfg, > > + }, { > > .compatible = "qcom,msm8996-qmp-usb3-phy", > > .data = &msm8996_usb3phy_cfg, > > }, { > > -- > > 2.7.4 > > > > > -- > With best wishes > Dmitry
This patch series adds the relevant phy and controller configurations for enabling USB on IPQ9754 Depends on: https://lore.kernel.org/all/20230217142030.16012-1-quic_devipriy@quicinc.com/ [v5]: - Incorporated review comments - 'make dtbs_check' giving the following messages since ipq9574 doesn't have power domains. Hope this is ok /local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: phy@7d000: 'power-domains' is a required property From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml /local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: usb@8a00000: 'power-domains' is a required property From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml - Move qmp phy DT node to newer specification [v4]: - Incorporated review comments - Address all 'make dtbs_check' errors [v3]: - Incorporated review comments regarding coding style [v2]: - Incorporated review comments regarding coding style, maintaining sorted order of entries and unused phy register offsets - Removed NOC clock entries from DT node (will be implemented later with interconnect support) - Fixed 'make dtbs_check' errors/warnings [v1]: https://lore.kernel.org/linux-arm-msm/5dac3aa4-8dc7-f9eb-5cf3-b361efdc9494@linaro.org/T/ Varadarajan Narayanan (8): dt-bindings: phy: qcom,qusb2: Document IPQ9574 compatible dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY dt-bindings: usb: dwc3: Add IPQ9574 compatible clk: qcom: gcc-ipq9574: Add USB related clocks phy: qcom-qusb2: add QUSB2 support for IPQ9574 phy: qcom: qmp: Update IPQ9574 USB Phy initialization Sequence arm64: dts: qcom: ipq9574: Add USB related nodes arm64: dts: qcom: ipq9574: Enable USB .../devicetree/bindings/phy/qcom,qusb2-phy.yaml | 3 +- .../phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml | 1 + .../devicetree/bindings/usb/qcom,dwc3.yaml | 19 ++++ arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dts | 16 +++ arch/arm64/boot/dts/qcom/ipq9574.dtsi | 120 +++++++++++++++++++++ drivers/clk/qcom/gcc-ipq9574.c | 37 +++++++ drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 115 ++++++++++++++++++++ drivers/phy/qualcomm/phy-qcom-qusb2.c | 3 + include/dt-bindings/clock/qcom,ipq9574-gcc.h | 2 + 9 files changed, 315 insertions(+), 1 deletion(-)