mbox series

[0/3] Bug fixes for UFS multi-frequency scaling on Qcom platform

Message ID 20250502042432.88434-1-quic_ziqichen@quicinc.com
Headers show
Series Bug fixes for UFS multi-frequency scaling on Qcom platform | expand

Message

Ziqi Chen May 2, 2025, 4:24 a.m. UTC 
This series fixes a few corner cases introduced by multi-frequency scaling feature
on some old Qcom platforms design.

1. On some platforms, the frequency tables for unipro clock and the core clock are different,
   which has led to errors when handling the unipro clock.

2. On some platforms, the maximum gear supported by the host may exceed the maximum gear
   supported by connected UFS device. Therefore, this should be taken into account when
   find mapped gear for frequency.

This series has been tested on below platforms -
sm8550 mtp + UFS3.1
SM8650 MTP + UFS3.1
QCS6490 BR3GEN2 + UFS2.2

For change "scsi: ufs: qcom: Check gear against max gear in vop freq_to_gear()"
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on RB3GEN2

For change "scsi: ufs: qcom: Map devfreq OPP freq to UniPro Core Clock freq"
           "scsi: ufs: qcom: Call ufs_qcom_cfg_timers() in clock scaling path"
The original pathes of these two changes are tested by: Luca Weiss <luca.weiss@fairphone.com> on
SM6350, but we have reworked the code logic later.


Can Guo (2):
  scsi: ufs: qcom: Map devfreq OPP freq to UniPro Core Clock freq
  scsi: ufs: qcom: Call ufs_qcom_cfg_timers() in clock scaling path

Ziqi Chen (1):
  scsi: ufs: qcom: Check gear against max gear in vop freq_to_gear()

 drivers/ufs/host/ufs-qcom.c | 134 +++++++++++++++++++++++++++---------
 1 file changed, 103 insertions(+), 31 deletions(-)