mbox series

[0/3] scsi: ufs: qcom: Suspend fixes

Message ID 20241211-ufs-qcom-suspend-fix-v1-0-83ebbde76b1c@linaro.org
Headers show
Series scsi: ufs: qcom: Suspend fixes | expand

Message

Manivannan Sadhasivam via B4 Relay Dec. 11, 2024, 5:40 p.m. UTC 
Hi,

This series fixes the several suspend issues on Qcom platforms. Patch 1 fixes
the resume failure with spm_lvl=5 suspend on most of the Qcom platforms. For
this patch, I couldn't figure out the exact commit that caused the issue. So I
used the commit that introduced reinit support as a placeholder.

Patch 3 fixes the suspend issue on SM8550 and SM8650 platforms where UFS
PHY retention is not supported. Hence the default spm_lvl=3 suspend fails. So
this patch configures spm_lvl=5 as the default suspend level to force UFSHC/
device powerdown during suspend. This supersedes the previous series [1] that
tried to fix the issue in clock drivers.

This series is tested on Qcom SM8550 MTP and Qcom RB5 boards.

[1] https://lore.kernel.org/linux-arm-msm/20241107-ufs-clk-fix-v1-0-6032ff22a052@linaro.org

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
Manivannan Sadhasivam (3):
      scsi: ufs: qcom: Power off the PHY if it was already powered on in ufs_qcom_power_up_sequence()
      scsi: ufs: qcom: Allow passing platform specific OF data
      scsi: ufs: qcom: Power down the controller/device during system suspend for SM8550/SM8650 SoCs

 drivers/ufs/core/ufshcd-priv.h |  6 ------
 drivers/ufs/core/ufshcd.c      |  1 -
 drivers/ufs/host/ufs-qcom.c    | 31 +++++++++++++++++++------------
 drivers/ufs/host/ufs-qcom.h    |  5 +++++
 include/ufs/ufshcd.h           |  2 --
 5 files changed, 24 insertions(+), 21 deletions(-)
---
base-commit: 40384c840ea1944d7c5a392e8975ed088ecf0b37
change-id: 20241211-ufs-qcom-suspend-fix-5618e9c56d93

Best regards,