mbox series

[v3,0/5] Add static channel mapping between soundwire master and slave

Message ID 20241126164300.3305903-1-quic_mohs@quicinc.com
Headers show
Series Add static channel mapping between soundwire master and slave | expand

Message

Mohammad Rafi Shaik Nov. 26, 2024, 4:42 p.m. UTC 
Add static channel map support between soundwire master and slave.

Currently, the channel value for each soundwire port is hardcoded in the
wcd937x-sdw driver and the same channel  value is configured in the
soundwire master.

The Qualcomm board like the QCM6490-IDP require static channel map
settings for the soundwire master and slave ports.

If another boards which are using enable wcd937x, the channel mapping
index values between master and slave may be different depending on the
board hw design and requirements. If the above properties are not used
in a SoC specific device tree, the channel mapping index values are set
to default.

With the introduction of the following channel mapping properties, it is
now possible to configure the master channel mapping directly from the
device tree.

Added qcom_swrm_set_channel_map api to set the master channel values
which allows more flexible to configure channel values in runtime for
specific active soundwire ports.

Add get and set channel maps support from codec to cpu dais in common
Qualcomm sdw driver.

Changes since v2:
 - Rephrase commit description v2-0001 dt-bindings patch as suggested by Krzysztof.

Changes since v1:
 - Modified the design and followed new approach to setting the master channel mask.
 - Used existing set_channel_map api as suggested by Pierre-Louis
 - Fixed the typo mistake in v1-0001 dt-bindings patch.
 - Rephrase the commit description for all v1 patches.

Mohammad Rafi Shaik (5):
  ASoC: dt-bindings: Add bindings for wcd937x static channel mapping
  ASoC: dt-bindings: wcd937x-sdw: Add static channel mapping support
  ASoC: codecs: wcd937x: Add static channel mapping support in
    wcd937x-sdw
  soundwire: qcom: Add set_channel_map api support
  ASoC: qcom: sdw: Add get and set channel maps support from codec to
    cpu dais

 .../bindings/sound/qcom,wcd937x-sdw.yaml      | 48 +++++++++++++++++
 drivers/soundwire/qcom.c                      | 26 +++++++++
 include/dt-bindings/sound/qcom,wcd93xx.h      | 13 +++++
 sound/soc/codecs/wcd937x-sdw.c                | 38 +++++++++++--
 sound/soc/codecs/wcd937x.c                    | 53 ++++++++++++++++++-
 sound/soc/codecs/wcd937x.h                    |  6 ++-
 sound/soc/qcom/sdw.c                          | 34 ++++++++++--
 7 files changed, 208 insertions(+), 10 deletions(-)
 create mode 100644 include/dt-bindings/sound/qcom,wcd93xx.h