mbox series

[v10,0/6] Add interconnect driver for IPQ9574 SoC

Message ID 20240429091314.761900-1-quic_varada@quicinc.com
Headers show
Series Add interconnect driver for IPQ9574 SoC | expand

Message

Varadarajan Narayanan April 29, 2024, 9:13 a.m. UTC 
MSM platforms manage NoC related clocks and scaling from RPM.
However, in IPQ SoCs, RPM is not involved in managing NoC
related clocks and there is no NoC scaling.

However, there is a requirement to enable some NoC interface
clocks for the accessing the peripherals present in the
system. Hence add a minimalistic interconnect driver that
establishes a path from the processor/memory to those peripherals
and vice versa.

---
v10:	Set gcc-ipq9574 driver's sync_state to icc_sync_state
v9:	Squash icc-clk driver change and cbf-msm8996 change
	Remove HWS_DATA macro
v8:	Change icc-clk driver to take master and slave ids instead
	of auto generating
	Remove ICC_xxx defines from dt-bindings header
	Define MASTER/SLAVE_xxx macros from 0 .. n

v7:	Fix macro names in dt-bindings header
	Do clock get in icc driver

v6:	Removed 'Reviewed-by: Krzysztof' from dt-bindings patch
	Remove clock get from ICC driver as suggested by Stephen Boyd
	so that the actual peripheral can do the clock get
	first_id -> icc_first_node_id
	Remove tristate from INTERCONNECT_CLK
v5:
	Split gcc-ipq9574.c and common.c changes into separate patches
	Introduce devm_icc_clk_register
	Fix error handling
v4:
gcc-ipq9574.c
	Use clk_hw instead of indices
common.c
	Do icc register in qcom_cc_probe() call stream
common.h
	Add icc clock info to qcom_cc_desc structure

v3:
qcom,ipq9574.h
	Move 'first id' define to clock driver
gcc-ipq9574.c:
	Use indexed identifiers here to avoid confusion
	Fix error messages and move code to common.c as it can be
	shared with future SoCs

v2:
qcom,ipq9574.h
	Fix license identifier
	Rename macros
qcom,ipq9574-gcc.yaml
	Include interconnect-cells
gcc-ipq9574.c
	Update commit log
	Remove IS_ENABLED(CONFIG_INTERCONNECT) and auto select it from Kconfig
ipq9574.dtsi
	Moved to separate patch
	Include interconnect-cells to clock controller node
drivers/clk/qcom/Kconfig:
	Auto select CONFIG_INTERCONNECT & CONFIG_INTERCONNECT_CLK

Varadarajan Narayanan (6):
  interconnect: icc-clk: Allow user to specify master/slave ids
  dt-bindings: interconnect: Add Qualcomm IPQ9574 support
  interconnect: icc-clk: Add devm_icc_clk_register
  clk: qcom: common: Add interconnect clocks support
  clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks
  arm64: dts: qcom: ipq9574: Add icc provider ability to gcc

 .../bindings/clock/qcom,ipq9574-gcc.yaml      |  3 +
 arch/arm64/boot/dts/qcom/ipq9574.dtsi         |  2 +
 drivers/clk/qcom/Kconfig                      |  2 +
 drivers/clk/qcom/clk-cbf-8996.c               |  7 ++-
 drivers/clk/qcom/common.c                     | 35 ++++++++++-
 drivers/clk/qcom/common.h                     |  9 +++
 drivers/clk/qcom/gcc-ipq9574.c                | 33 +++++++++++
 drivers/interconnect/icc-clk.c                | 24 +++++++-
 .../dt-bindings/interconnect/qcom,ipq9574.h   | 59 +++++++++++++++++++
 include/linux/interconnect-clk.h              |  4 ++
 10 files changed, 173 insertions(+), 5 deletions(-)
 create mode 100644 include/dt-bindings/interconnect/qcom,ipq9574.h