mbox series

[v3,0/9] arm64: dts: qcom: fix description of the Type-C signals

Message ID 20240401-typec-fix-sm8250-v3-0-604dce3ad103@linaro.org
Headers show
Series arm64: dts: qcom: fix description of the Type-C signals | expand

Message

Dmitry Baryshkov April 1, 2024, 8:33 p.m. UTC
Rename the HS link between usb-c-connector and the DWC3 USB controller.
Add missing graph connection between the QMP PHY and DWC3 USB
controller.

Reported-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
Changes in v3:
- Fixed dispcc bindings / clock inputs on sc8180x (Rob Herring)
- Link to v2: https://lore.kernel.org/r/20240331-typec-fix-sm8250-v2-0-857acb6bd88e@linaro.org

Changes in v2:
- Fixed other platforms in addition to sm8250 (Bryan)
- Link to v1: https://lore.kernel.org/r/20240322-typec-fix-sm8250-v1-0-1ac22b333ea9@linaro.org

---
Dmitry Baryshkov (9):
      dt-bindings: clk: qcom,dispcc-sm8x50: describe additional DP clocks
      arm64: dts: qcom: sc8180x: correct dispcc clocks
      arm64: dts: qcom: sm8250: describe HS signals properly
      arm64: dts: qcom: sm8250: add a link between DWC3 and QMP PHY
      arm64: dts: qcom: sc8180x: switch USB+DP QMP PHYs to new bindings
      arm64: dts: qcom: sc8180x: describe USB signals properly
      arm64: dts: qcom: sc8280xp: describe USB signals properly
      arm64: dts: qcom: x1e80100: describe USB signals properly
      arm64: dts: qcom: sm8150-hdk: rename Type-C HS endpoints

 .../bindings/clock/qcom,dispcc-sm8x50.yaml         |  28 ++++
 arch/arm64/boot/dts/qcom/qrb5165-rb5.dts           |   8 +-
 .../arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts |  16 +-
 arch/arm64/boot/dts/qcom/sc8180x-primus.dts        |  20 +--
 arch/arm64/boot/dts/qcom/sc8180x.dtsi              | 182 ++++++++++-----------
 arch/arm64/boot/dts/qcom/sc8280xp-crd.dts          |  20 +--
 .../dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts     |  20 +--
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi             |  54 +++++-
 arch/arm64/boot/dts/qcom/sm8150-hdk.dts            |   4 +-
 .../boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi  |   8 +-
 arch/arm64/boot/dts/qcom/sm8250.dtsi               |  24 ++-
 arch/arm64/boot/dts/qcom/x1e80100.dtsi             | 149 ++++++++++++++++-
 12 files changed, 380 insertions(+), 153 deletions(-)
---
base-commit: a6bd6c9333397f5a0e2667d4d82fef8c970108f2
change-id: 20240322-typec-fix-sm8250-33c47a03a056

Best regards,

Comments

Konrad Dybcio April 10, 2024, 12:31 p.m. UTC | #1
On 4/1/24 22:33, Dmitry Baryshkov wrote:
> Correct the clocks being used by the display clock controller on the
> SC8180X platform (to match the schema):
> - Drop the sleep clock
> - Add DSI clocks
> - Reorder eDP / DP clocks
> 
> This changes the order of clocks, however it should be noted that the
> clock list was neither correct nor followed the schema beforehand.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
Konrad Dybcio April 10, 2024, 12:33 p.m. UTC | #2
On 4/1/24 22:33, Dmitry Baryshkov wrote:
> To follow other Qualcomm platforms, update QMP USB+DP PHYs to use newer
> bindings rather than old bindings which had PHYs as subdevices.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---

[...]

>   		usb_sec_qmpphy: phy@88ee000 {

This unit address also needs to be updated

LGTM otherwise

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad