mbox series

[net-next,v2,0/2] net: phy: qcom: qca808x: fill in possible_interfaces

Message ID 20240228172452.2456842-1-robimarko@gmail.com
Headers show
Series net: phy: qcom: qca808x: fill in possible_interfaces | expand

Message

Robert Marko Feb. 28, 2024, 5:24 p.m. UTC
QCA808x does not currently fill in the possible_interfaces.

This leads to Phylink not being aware that it supports 2500Base-X as well
so in cases where it is connected to a DSA switch like MV88E6393 it will
limit that port to phy-mode set in the DTS.

That means that if SGMII is used you are limited to 1G only while if
2500Base-X was set you are limited to 2.5G only.

Populating the possible_interfaces fixes this.

Changes in v2:
* Get rid of the if/else by Russels suggestion in the helper

Robert Marko (2):
  net: phy: qcom: qca808x: add helper for checking for 1G only model
  net: phy: qcom: qca808x: fill in possible_interfaces

 drivers/net/phy/qcom/qca808x.c | 29 ++++++++++++++++++++++++-----
 1 file changed, 24 insertions(+), 5 deletions(-)