[0/3] arm64: qcom: add support for QCS8550 RB5gen2 HDK board

RB5gen2-HDK is Thundercomm's development platform used for IOT solutions.
It is based on Rb5gen2-SOM which is using QCOM's QCS8550 SoC.

On-board components:
- Qualcomm QCS8550 SoC
- LPDDR5, 12 GiB
- UFS3.1, 128 GiB
- USB3.1

On-board PMICs:
- PM8550VS
- PM8550VE
- PM8550
- PM8550BH
- PMK8550
- PMR735D
- PM8010

This series depends on [1].

[1]: https://lore.kernel.org/all/20240119100621.11788-1-quic_tengfan@quicinc.com/


Wasim Nazir (3):
  dt-bindings: arm: qcom: Document rb5gen2-hdk board
  arm64: dts: qcom: Add initial support for rb5gen2 SOM
  arm64: dts: qcom: Add initial support for rb5gen2 HDK board

 .../devicetree/bindings/arm/qcom.yaml         |   9 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/qcs8550-rb5gen2-hdk.dts     | 136 ++++++
 arch/arm64/boot/dts/qcom/qcs8550-rb5gen2.dtsi | 438 ++++++++++++++++++
 4 files changed, 584 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/qcs8550-rb5gen2-hdk.dts
 create mode 100644 arch/arm64/boot/dts/qcom/qcs8550-rb5gen2.dtsi

--
2.43.0

On 2/2/2024 8:23 PM, Dmitry Baryshkov wrote:
> On Fri, 2 Feb 2024 at 15:37, Wasim Nazir <quic_wasimn@quicinc.com> wrote:
>>
>> RB5gen2 hardware development kit is based on QCS8550-Rb5gen2 SOM
>> for IOT solutions.
>> This initial version describes VPH_PWR, UART & USB3.1.
>>
>> On-board PMICs:
>> - PMR735D
>> - PM8010
>>
>> Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index 6fdde64d7540..8840b219d6d5 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -93,6 +93,7 @@ dtb-$(CONFIG_ARCH_QCOM)       += qcs404-evb-1000.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)        += qcs404-evb-4000.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)        += qcs6490-rb3gen2.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)        += qcs8550-aim300-aiot.dtb
>> +dtb-$(CONFIG_ARCH_QCOM)        += qcs8550-rb5gen2-hdk.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)        += qdu1000-idp.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)        += qrb2210-rb1.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)        += qrb4210-rb2.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/qcs8550-rb5gen2-hdk.dts b/arch/arm64/boot/dts/qcom/qcs8550-rb5gen2-hdk.dts
>> new file mode 100644
>> index 000000000000..6f4c68402823
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/qcs8550-rb5gen2-hdk.dts
>> @@ -0,0 +1,136 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "qcs8550-rb5gen2.dtsi"
>> +#include "pm8010.dtsi"
>> +#include "pmr735d_a.dtsi"
>> +#include "pmr735d_b.dtsi"
>> +
>> +/ {
>> +       model = "Qualcomm Technologies, Inc. QCS8550 RB5Gen2 HDK";
>> +       compatible = "qcom,qcs8550-rb5gen2-hdk", "qcom,qcs8550-rb5gen2",
>> +                       "qcom,qcs8550", "qcom,qcm8550", "qcom,sm8550";
>> +
>> +       aliases {
>> +               serial0 = &uart7;
>> +       };
>> +
>> +       chosen {
>> +               stdout-path = "serial0:115200n8";
>> +       };
>> +
>> +       pmic-glink {
>> +               compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
>> +               #address-cells = <1>;
>> +               #size-cells = <0>;
>> +
>> +               connector@0 {
>> +                       compatible = "usb-c-connector";
>> +                       reg = <0>;
>> +                       power-role = "dual";
>> +                       data-role = "dual";
>> +
>> +                       ports {
>> +                               #address-cells = <1>;
>> +                               #size-cells = <0>;
>> +
>> +                               port@0 {
>> +                                       reg = <0>;
>> +
>> +                                       pmic_glink_hs_in: endpoint {
>> +                                               remote-endpoint = <&usb_1_dwc3_hs>;
>> +                                       };
> 
> SS lines unconnected?
> SBU is unconnected?
> 
This is the initial patch with basic support and that's why only HS is 
added. Other features are planned in incremental patch by respective 
team. I will update the commit message in next patch version.
>> +                               };
>> +                       };
>> +               };
>> +       };
>> +
>> +       vph_pwr: vph-pwr-regulator {
>> +               compatible = "regulator-fixed";
>> +               regulator-name = "vph_pwr";
>> +               regulator-min-microvolt = <3700000>;
>> +               regulator-max-microvolt = <3700000>;
>> +
>> +               regulator-always-on;
>> +               regulator-boot-on;
>> +       };
>> +};
>> +
>> +&apps_rsc {
>> +       regulators-0 {
>> +               vdd-bob1-supply = <&vph_pwr>;
>> +               vdd-bob2-supply = <&vph_pwr>;
>> +       };
>> +
>> +       regulators-2 {
>> +               vdd-s4-supply = <&vph_pwr>;
>> +               vdd-s5-supply = <&vph_pwr>;
>> +       };
>> +
>> +       regulators-3 {
>> +               vdd-s1-supply = <&vph_pwr>;
>> +               vdd-s3-supply = <&vph_pwr>;
>> +               vdd-s4-supply = <&vph_pwr>;
>> +               vdd-s5-supply = <&vph_pwr>;
>> +               vdd-s6-supply = <&vph_pwr>;
>> +       };
>> +
>> +       regulators-4 {
>> +               vdd-s1-supply = <&vph_pwr>;
>> +               vdd-s3-supply = <&vph_pwr>;
>> +               vdd-s4-supply = <&vph_pwr>;
>> +               vdd-s5-supply = <&vph_pwr>;
>> +               vdd-s7-supply = <&vph_pwr>;
>> +       };
>> +
>> +       regulators-5 {
>> +               vdd-s1-supply = <&vph_pwr>;
>> +               vdd-s2-supply = <&vph_pwr>;
>> +               vdd-s3-supply = <&vph_pwr>;
>> +               vdd-s4-supply = <&vph_pwr>;
>> +               vdd-s5-supply = <&vph_pwr>;
>> +               vdd-s6-supply = <&vph_pwr>;
>> +       };
>> +};
>> +
>> +&pm8550b_eusb2_repeater {
>> +       vdd18-supply = <&vreg_l15b_1p8>;
>> +       vdd3-supply = <&vreg_l5b_3p1>;
>> +};
>> +
>> +&uart7 {
>> +       status = "okay";
>> +};
>> +
>> +&usb_1 {
>> +       status = "okay";
>> +};
>> +
>> +&usb_1_dwc3 {
>> +       dr_mode = "otg";
>> +       usb-role-switch;
>> +};
>> +
>> +&usb_1_dwc3_hs {
>> +       remote-endpoint = <&pmic_glink_hs_in>;
>> +};
>> +
>> +&usb_1_hsphy {
>> +       vdd-supply = <&vreg_l1e_0p88>;
>> +       vdda12-supply = <&vreg_l3e_1p2>;
>> +
>> +       phys = <&pm8550b_eusb2_repeater>;
>> +
>> +       status = "okay";
>> +};
>> +
>> +&usb_dp_qmpphy {
>> +       vdda-phy-supply = <&vreg_l3e_1p2>;
>> +       vdda-pll-supply = <&vreg_l3f_0p88>;
>> +
>> +       status = "okay";
>> +};
>> --
>> 2.43.0
>>
>>
> 
> 

Thanks & Regards,
Wasim